MIC61300-10YML-TR Equivalent & Substitute Parts

Part Overview

The MIC61300-10YML-TR is a linear voltage regulator IC from Microchip Technology designed for positive fixed output applications. This device delivers 3A output current with a fixed 1V output and operates across an input voltage range up to 3.6V. The regulator features integrated over-current and over-temperature protection with an enable control function. The component is housed in a 10-MLF® (3x3) package suitable for surface mount applications and maintains active product status with full RoHS3 compliance.

Identifying equivalent and substitute parts is necessary when addressing supply chain constraints, inventory availability, or design optimization requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

MIC61300-10YML-TR

Microchip TechnologyIn Stock: 873MIC61300-10YML-TR Datasheet

Current PartRFQ

MIC61300-10YML-TR

Microchip TechnologyIn Stock: 873MIC61300-10YML-TR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MIC61300-10YML-TR is determined by strict alignment across the following critical parameters:

• Output voltage specification: Fixed 1V output
• Output current capability: 3A minimum
• Input voltage maximum rating: 3.6V or higher
• Package type: 10-MLF® (3x3) surface mount
• Protection features: Over-current and over-temperature protection
• Control functionality: Enable pin present
• Product status: Active
• Compliance certifications: RoHS3 compliance required

Only components matching all these parameters across electrical performance and mechanical form factor qualify as direct substitutes. The MIC61300-10YML-TR serves as both the primary reference and the confirmed parametric equivalent within the available inventory.

Parameter Comparison

Engineering Selection Recommendations

The MIC61300-10YML-TR maintains active product status with full RoHS3 compliance and REACH unaffected designation, confirming its suitability for current design implementations. The device carries MSL Level 1 (Unlimited) moisture sensitivity rating, indicating minimal handling restrictions during assembly and storage.

Selection of this component is supported by its active manufacturing status, regulatory compliance certifications, and confirmed availability of 766 pieces in new original stock condition. The 10-MLF® package provides a compact surface mount solution suitable for space-constrained applications requiring 1V fixed output regulation at 3A output current.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the MIC61300-10YML-TR?

A: A valid substitute must match the fixed 1V output voltage, deliver 3A output current, accept input voltages up to 3.6V, use the 10-MLF® (3x3) package, include over-current and over-temperature protection, provide an enable control pin, maintain active product status, and comply with RoHS3 requirements.

Q: Can I use a different output voltage regulator as a substitute?

A: No. The MIC61300-10YML-TR is specified for fixed 1V output. Substitutes must maintain this exact output voltage specification. Different output voltages are not compatible with the intended application.

Q: Is the 10-MLF® package interchangeable with other package types?

A: No. The 10-MLF® (3x3) package is a specific surface mount form factor. Substitutes must use this identical package type to ensure PCB layout compatibility and proper thermal performance.

Q: What is the significance of the 0.35V dropout voltage specification?

A: The maximum dropout voltage of 0.35V at 3A output current defines the minimum input voltage required to maintain regulation at full load. Substitute components must meet or exceed this performance specification.

Q: Does the enable control feature affect substitution compatibility?

A: Yes. The enable pin is a control feature integrated into the MIC61300-10YML-TR design. Substitute parts must include this enable functionality to maintain circuit compatibility and control capability.

Q: What does RoHS3 compliance mean for component selection?

A: RoHS3 compliance certifies that the component meets European Union restrictions on hazardous substances. This certification is required for many applications and must be maintained in substitute part selection.