Request Quote
(Ships tomorrow)
MIC38C43AYM-TR Equivalent & Substitute Parts
Part Overview
The MIC38C43AYM-TR is a multi-topology DC-DC controller IC manufactured by Microchip Technology, designed for buck, boost, flyback, and forward converter applications. This device operates as a transistor driver with positive, isolation-capable output configuration and supports step-up, step-down, and step-up/step-down topologies. The part is currently active in production with 698 units in stock and carries ROHS3 compliance certification.
Substitute parts are identified when design requirements necessitate alternative packaging formats, extended supply voltage ranges, higher switching frequency capabilities, or different manufacturer sourcing while maintaining functional equivalence within the specified electrical and mechanical parameters.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Technology |
| Category | Power Management (PMIC) |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Mounting Type | Surface Mount |
| Output Type | Transistor Driver |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Voltage - Supply (Vcc/Vdd) | 7.6V ~ 20V |
| Frequency - Switching | 500kHz |
| Duty Cycle (Max) | 96% |
| Synchronous Rectifier | Yes |
| Operating Temperature | -40°C ~ 85°C (TA) |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitute parts for the MIC38C43AYM-TR are classified into two categories based on substitution criteria:
Parametric Equivalents (Microchip Technology): Parts MIC38C43XYM-TR, MIC38C43YM-TR, and MIC38HC43YM-TR maintain identical electrical specifications including supply voltage range (7.6V ~ 20V), duty cycle (96%), synchronous rectifier capability, and operating temperature range (-40°C ~ 85°C). These parts differ only in packaging format (Cut Tape vs. Tape & Reel) and inventory availability. The MIC38HC43YM-TR variant does not specify switching frequency in the provided data.
Manufacturer Recommended Alternatives (Renesas Electronics Corporation): Parts ISL6840IBZ-T, ISL6842IBZ, ISL6843IBZ, ISL6843IBZ-T, ISL8840AABZ-T, ISL8842AABZ, and ISL8842AABZ-T are functionally compatible alternatives with the following allowable parameter variations:
- Supply voltage range: 7.5V ~ 30V (extended upper limit)
- Switching frequency: Up to 2MHz (higher than 500kHz baseline)
- Operating temperature: -40°C ~ 105°C (extended upper limit)
- Topology support: Subset of original (Boost/Flyback focus vs. full multi-topology)
- Synchronous rectifier: Variable (Yes/No depending on part)
- Moisture sensitivity: MSL 3 (168 Hours) for Renesas parts vs. MSL 1 for Microchip
All substitute parts maintain 8-SOIC package format, surface mount configuration, and ROHS3 compliance.
Parameter Comparison
| Part Number | Manufacturer | Packaging | Vcc/Vdd Range | Switching Frequency | Duty Cycle (Max) | Sync Rectifier | Temp Range | MSL | Inventory |
|---|---|---|---|---|---|---|---|---|---|
| MIC38C43AYM-TR | Microchip | Tape & Reel (TR) | 7.6V ~ 20V | 500kHz | 96% | Yes | -40°C ~ 85°C | 1 | 698 Pcs |
| MIC38C43XYM-TR | Microchip | Cut Tape (CT) | 7.6V ~ 20V | 500kHz | 96% | Yes | -40°C ~ 85°C | 1 | 2430 Pcs |
| MIC38C43YM-TR | Microchip | Cut Tape (CT) & Digi-Reel® | 7.6V ~ 20V | 500kHz | 96% | Yes | -40°C ~ 85°C | 1 | 2160 Pcs |
| MIC38HC43YM-TR | Microchip | Cut Tape (CT) & Digi-Reel® | 7.6V ~ 20V | Not specified | 96% | Yes | -40°C ~ 85°C | 1 | 5200 Pcs |
| ISL6840IBZ-T | Renesas | Cut Tape (CT) & Digi-Reel® | 7.5V ~ 14V | Up to 2MHz | 96% | Yes | -40°C ~ 105°C | 3 | 4180 Pcs |
| ISL6842IBZ | Renesas | Tube | 8.8V ~ 18V | Up to 2MHz | 96% | Not specified | -40°C ~ 105°C | 3 | 1700 Pcs |
| ISL6843IBZ | Renesas | Tube | 9V ~ 16V | Up to 2MHz | 96% | Yes | -40°C ~ 105°C | 3 | 1127 Pcs |
| ISL6843IBZ-T | Renesas | Cut Tape (CT) & Digi-Reel® | 9V ~ 16V | Up to 2MHz | 96% | Yes | -40°C ~ 105°C | 3 | 17700 Pcs |
| ISL8840AABZ-T | Renesas | Tape & Reel (TR) | 9V ~ 30V | Up to 2MHz | 96% | No | -40°C ~ 105°C | 1 | 3455 Pcs |
| ISL8842AABZ | Renesas | Tube | 8.8V ~ 30V | Up to 2MHz | 96% | Not specified | -40°C ~ 105°C | 3 | 1133 Pcs |
| ISL8842AABZ-T | Renesas | Tape & Reel (TR) | 8.8V ~ 30V | Up to 2MHz | 96% | Not specified | -40°C ~ 105°C | 3 | 3175 Pcs |
Engineering Selection Recommendations
For Direct Packaging Substitution: MIC38C43XYM-TR and MIC38C43YM-TR provide identical electrical performance to the MIC38C43AYM-TR with alternative packaging formats. Both maintain Microchip Technology sourcing, ROHS3 compliance, MSL 1 rating, and active product status. Selection between these options depends on assembly process requirements (Cut Tape vs. Tape & Reel).
For Extended Supply Voltage Applications: ISL8840AABZ-T and ISL8842AABZ-T support supply voltage up to 30V, compared to the 20V maximum of the MIC38C43AYM-TR. These Renesas parts maintain Tape & Reel packaging and ROHS3 compliance. ISL8840AABZ-T retains MSL 1 rating; ISL8842AABZ-T carries MSL 3.
For Higher Switching Frequency Requirements: All Renesas alternatives (ISL6840IBZ-T, ISL6843IBZ-T, ISL8840AABZ-T, ISL8842AABZ-T) support switching frequencies up to 2MHz, exceeding the 500kHz specification of the MIC38C43AYM-TR. These parts also support extended operating temperature to 105°C.
For Topology-Specific Applications: ISL6840IBZ-T and ISL6843IBZ-T focus on boost and flyback topologies with synchronous rectifier support. ISL8842AABZ-T supports boost and flyback topologies without synchronous rectifier. Selection should align with specific converter topology requirements.
Compliance Considerations: All listed parts maintain ROHS3 compliance and active product status. Renesas parts carry MSL 3 (168 Hours) except ISL8840AABZ-T (MSL 1), affecting moisture handling during assembly.
Frequently Asked Questions (FAQ)
Q: Can MIC38C43XYM-TR replace MIC38C43AYM-TR in production?
A: Yes. Both parts are electrically identical with matching supply voltage (7.6V ~ 20V), switching frequency (500kHz), duty cycle (96%), and operating temperature (-40°C ~ 85°C). The difference is packaging format: MIC38C43AYM-TR uses Tape & Reel while MIC38C43XYM-TR uses Cut Tape. Verify assembly equipment compatibility with the selected packaging format.
Q: What are the key differences between Microchip and Renesas substitute options?
A: Microchip parts (MIC38C43 series) maintain fixed 500kHz switching frequency and 7.6V ~ 20V supply range with MSL 1 rating. Renesas parts offer higher switching frequencies (up to 2MHz), extended supply voltage ranges (up to 30V), and higher operating temperatures (105°C maximum). Renesas parts carry MSL 3 except ISL8840AABZ-T. Topology support varies: Microchip supports buck, boost, flyback, and forward; Renesas alternatives focus on boost and flyback subsets.
Q: Is ISL6843IBZ-T suitable for applications requiring the full multi-topology support of MIC38C43AYM-TR?
A: No. ISL6843IBZ-T supports only boost and flyback topologies, not buck or forward converter modes. Select this part only if your application requires boost or flyback operation. For multi-topology flexibility, retain Microchip MIC38C43 series parts.
Q: Can ISL8840AABZ-T be used in 30V supply applications?
A: Yes. ISL8840AABZ-T supports supply voltage from 9V to 30V, compared to MIC38C43AYM-TR maximum of 20V. However, verify that other circuit parameters (output configuration, control features, and topology requirements) align with your design before substitution.
Q: What packaging formats are available for high-volume production?
A: For Tape & Reel format: MIC38C43AYM-TR (698 Pcs), ISL8840AABZ-T (3455 Pcs), and ISL8842AABZ-T (3175 Pcs). For Cut Tape with Digi-Reel: MIC38C43XYM-TR (2430 Pcs), MIC38C43YM-TR (2160 Pcs), MIC38HC43YM-TR (5200 Pcs), ISL6840IBZ-T (4180 Pcs), and ISL6843IBZ-T (17700 Pcs). Tube packaging is available for ISL6842IBZ, ISL6843IBZ, and ISL8842AABZ.
Q: Does synchronous rectifier support differ between substitutes?
A: Yes. MIC38C43 series and most Renesas parts (ISL6840IBZ-T, ISL6843IBZ, ISL6843IBZ-T) include synchronous rectifier support. ISL8840AABZ-T does not support synchronous rectification. ISL6842IBZ and ISL8842AABZ series do not specify synchronous rectifier capability. Verify this feature is not required before selecting these alternatives.
Q: What is the impact of MSL rating differences on assembly?
A: MIC38C43 series and ISL8840AABZ-T carry MSL 1 (Unlimited moisture sensitivity), allowing extended shelf life without baking. Renesas parts with MSL 3 (168 Hours) require moisture baking before reflow if storage exceeds 168 hours in standard humidity conditions. Plan assembly scheduling accordingly when selecting MSL 3 parts.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts