MIC2214-DIBML TR Equivalent & Substitute Parts

Part Overview

The MIC2214-DIBML TR is a linear voltage regulator IC from Microchip Technology designed for positive fixed dual-output applications. This Surface Mount device delivers 150mA and 300mA output currents with fixed voltage outputs of 1.85V and 2.65V respectively. The part is classified as Obsolete, making identification of suitable substitute components essential for ongoing design support and production continuity.

Substiute Parts

MIC2214-DIBML TR

Microchip TechnologyIn Stock: 721MIC2214-DIBML TR Datasheet

Current PartRFQ

MIC2214-DIYML-TR

Microchip TechnologyIn Stock: 1264MIC2214-DIYML-TR Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MIC2214-DIBML TR is determined by strict alignment across the following critical parameters:

• Output configuration (Positive fixed dual-output)
• Fixed voltage outputs (1.85V and 2.65V)
• Output current ratings (150mA and 300mA)
• Maximum input voltage (5.5V)
• Voltage dropout specifications (0.25V @ 150mA, 0.42V @ 300mA)
• Package type (10-MLF® 3x3)
• Control and protection features (Enable, Power On Reset, Over Current, Over Temperature)
• Operating temperature range (-40°C ~ 125°C)

The MIC2214-DIYML-TR meets all these criteria and qualifies as a direct substitute. The primary distinction between these parts is product status and regulatory compliance.

Parameter Comparison

Engineering Selection Recommendations

The MIC2214-DIYML-TR is the qualified substitute for the obsolete MIC2214-DIBML TR. Both parts are electrically and mechanically identical across all functional parameters. The MIC2214-DIYML-TR offers the advantage of Active product status, ensuring continued availability and manufacturing support. Additionally, the MIC2214-DIYML-TR carries ROHS3 compliance, meeting current environmental and regulatory requirements, whereas the original part is RoHS non-compliant. Both parts maintain identical moisture sensitivity classification and REACH status. For new designs or production continuity, the MIC2214-DIYML-TR is the appropriate selection.

Frequently Asked Questions (FAQ)

Q: Are the MIC2214-DIBML TR and MIC2214-DIYML-TR pin-compatible?

A: Yes. Both parts use the 10-MLF® (3x3) package with identical pinout, electrical characteristics, and control features. Direct substitution is possible without circuit modification.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and regulatory compliance. The MIC2214-DIBML TR is Obsolete and RoHS non-compliant, while the MIC2214-DIYML-TR is Active and ROHS3 compliant. All electrical and mechanical specifications are identical.

Q: Can I use the MIC2214-DIYML-TR in place of the MIC2214-DIBML TR in existing designs?

A: Yes. The MIC2214-DIYML-TR is a direct functional equivalent with identical output voltages (1.85V and 2.65V), current ratings (150mA and 300mA), dropout voltage, quiescent current, and operating temperature range. No design changes are required.

Q: Why is the original part marked as Obsolete?

A: The MIC2214-DIBML TR has reached end-of-life status. The MIC2214-DIYML-TR represents the current production equivalent from Microchip Technology.

Q: Are there any compliance differences I should consider?

A: The MIC2214-DIYML-TR is ROHS3 compliant, making it suitable for applications subject to RoHS regulations. The original part is RoHS non-compliant. Both parts are REACH Unaffected and carry identical moisture sensitivity ratings.

Q: What is the package designation 10-MLF®?

A: 10-MLF® refers to a 10-pin Micro Lead Frame package in a 3x3mm form factor with an exposed pad. This is a Surface Mount package suitable for automated assembly.