MIC2015-1.2YML-TR Equivalent & Substitute Parts

Part Overview

The MIC2015-1.2YML-TR is an active power switch IC from Microchip Technology designed for general-purpose high-side P-channel switching applications. This component operates as a 1:1 power switch/driver with a maximum output current of 1.2A and is housed in a 6-DFN (2x2) surface mount package. The device is currently in active production status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

MIC2015-1.2YML-TR

Microchip TechnologyIn Stock: 1138MIC2015-1.2YML-TR Datasheet

Current PartRFQ

MIC2005-1.2YML-TR

Microchip TechnologyIn Stock: 823MIC2005-1.2YML-TR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MIC2015-1.2YML-TR is determined by strict equivalence across the following critical parameters:

• Output Current Rating: Maximum 1.2A output current capacity
• Voltage Operating Range: Load voltage specification of 2.5V ~ 5.5V
• On-Resistance: Typical Rds On of 70mOhm
• Output Configuration: High-side P-channel switching topology
• Package Format: 6-DFN (2x2) surface mount with exposed pad
• Electrical Interface: Non-inverting on/off control with slew rate control
• Fault Protection: Current limiting (fixed) and over-temperature protection
• Temperature Range: -40°C to 85°C operating specification
• Compliance: RoHS3 compliance and MSL 1 rating

The MIC2005-1.2YML-TR meets all these criteria as a parametric equivalent within the Microchip Technology power switch product line.

Parameter Comparison

Engineering Selection Recommendations

Both the MIC2015-1.2YML-TR and MIC2005-1.2YML-TR are active production components from Microchip Technology with identical electrical specifications and package formats. Selection between these parts is based on availability and supply chain considerations rather than functional differences.

Both components carry ROHS3 compliance certification and REACH unaffected status, meeting regulatory requirements for industrial and commercial applications. The MSL 1 rating indicates unlimited shelf life under standard storage conditions, eliminating moisture-related constraints during procurement and assembly.

For applications requiring high-side P-channel switching at 1.2A with 2.5V to 5.5V load voltage operation, either part number provides equivalent performance in the 6-DFN (2x2) surface mount package.

Frequently Asked Questions (FAQ)

Q: Can the MIC2005-1.2YML-TR be used as a direct replacement for the MIC2015-1.2YML-TR?

A: Yes. Both parts are parametric equivalents with identical electrical characteristics, output current ratings, voltage specifications, on-resistance, package format, and operating temperature range. Direct PCB substitution is supported without circuit modification.

Q: Are there any differences in package dimensions or pin configuration?

A: No. Both components use the 6-DFN (2x2) surface mount package with exposed pad. Pin configuration and mechanical dimensions are identical, enabling direct replacement on existing PCB layouts.

Q: What determines substitution eligibility for these power switch ICs?

A: Substitution is based on matching output current capacity (1.2A), load voltage range (2.5V ~ 5.5V), on-resistance (70mOhm), output configuration (high-side P-channel), package type (6-DFN 2x2), operating temperature range (-40°C to 85°C), and fault protection features (current limiting and over-temperature protection).

Q: Do both parts meet the same compliance standards?

A: Yes. Both the MIC2015-1.2YML-TR and MIC2005-1.2YML-TR are ROHS3 compliant, REACH unaffected, and carry MSL 1 moisture sensitivity ratings.

Q: Which part should be selected if both are available?

A: Selection is based on inventory availability and lead time. Both parts are functionally equivalent and provide identical performance in high-side P-channel switching applications within the specified voltage and current parameters.