Equivalent & Substitute Parts for MHT1001HR5

Part Overview

The MHT1001HR5 by NXP USA Inc. is an RF MOSFET LDMOS transistor with a test voltage of 28 V, a test current of 1.9 A, and an output power of 40 W at a frequency of 2.39 GHz, supplied in the NI-1230-4H chassis mount package. This component is classified as obsolete, making it necessary to identify alternative models to maintain continuity in designs, service, and inventory fulfillment. Finding substitutes within the same category—Transistors, FETs, MOSFETs—requires strict alignment with the electrical, mechanical, and compliance parameters provided.

Substiute Parts

MHT1001HR5

NXP USA Inc.In Stock: 878MHT1001HR5 Datasheet

Current PartRFQ

MRF24G300HSR5

NXP USA Inc.In Stock: 988MRF24G300HSR5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined strictly by comparison of provided product category, manufacturer, technology, channel configuration, operating frequency, gain, voltage test and rated, output power, mounting type, package/case, supplier device package, compliance status, and product status. Only substitute parts meeting these matched parameters are considered valid alternatives for the MHT1001HR5 within the Transistors, FETs, MOSFETs category.

Parameter Comparison

Engineering Selection Recommendations

Both MHT1001HR5 and MRF24G300HSR5 have an obsolete status and are ROHS3 compliant and REACH unaffected. Selection between these models should be based only on availability, compliance, and regulatory certifications as shown. No additional technical criteria may be considered beyond the parameters explicitly provided here.

Frequently Asked Questions (FAQ)

Q: What parameters are critical when substituting RF MOSFETs in this category?
A: Critical parameters are product category, manufacturer, technology, configuration, frequency, gain, voltage (test and rated), output power, mounting type, package/case, supplier device package, and compliance status.

Q: Is package compatibility required for substitution?
A: Substitution requires matching or compatible mounting type, package/case, and supplier device package as provided in the comparison table.

Q: Can substitute parts differ in technology or package format?
A: Only technologies, mounting types, and packages explicitly matched in the provided parameters are valid for substitution.

Q: How does compliance status affect substitution?
A: Only parts that are ROHS3 compliant and REACH unaffected, as stated, are valid for compliant replacement.

Q: Does obsolete status of substitute parts matter?
A: Yes, only parts with verified product status should be used, as explicitly indicated in the provided parameters.