MHSD-04B-AM-PRA-TR Equivalent & Substitute Parts

Part Overview

The MHSD-04B-AM-PRA-TR is a Miniature Coaxial Fakra Quadraxial Connector Plug manufactured by Adam Tech. This through-hole, right-angle solder connector operates at 50 Ohms impedance with a maximum frequency of 9 GHz. The part is classified as Active product status with full ROHS3 compliance and REACH unaffected designation. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector series, enabling component interchangeability in applications where packaging format or specific material finishes do not impose design constraints.

Substiute Parts

MHSD-04B-AM-PRA-TR

Adam TechIn Stock: 989MHSD-04B-AM-PRA-TR Datasheet

Current PartRFQ

MHSD-04B-BM-PRA-TR

Adam TechIn Stock: 2257MHSD-04B-BM-PRA-TR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts within the MHSD series maintain electrical equivalence through identical core parameters: 50 Ohms impedance, 9 GHz maximum frequency, Miniature Coaxial Fakra Quadraxial connector style, Plug Male Pin configuration, through-hole right-angle solder mounting, and -40°C to 105°C operating temperature range. Substitution is permitted when the following parameters remain constant:

• Connector Style: Miniature Coaxial, Fakra, Quadraxial
• Connector Type: Plug, Male Pin
• Impedance: 50 Ohms
• Frequency - Max: 9 GHz
• Mounting Type: Through Hole, Right Angle
• Contact Termination: Solder
• Shield Termination: Solder
• Operating Temperature: -40°C ~ 105°C
• Fastening Type: Latch Lock
• Number of Ports: 1
• Features: Code B
• Housing Color: White
• Body Material: Zinc Die Cast
• Dielectric Material: Thermoplastic
• Product Status: Active
• RoHS Status: ROHS3 Compliant

Variations in packaging format (Tape & Reel versus Cut Tape) and center contact plating material (Gold versus Silver) do not affect electrical or mechanical compatibility and permit substitution based on supply chain availability and inventory requirements.

Parameter Comparison

Engineering Selection Recommendations

Both MHSD-04B-AM-PRA-TR and MHSD-04B-BM-PRA-TR are Active status products with ROHS3 compliance and REACH unaffected designation, meeting current regulatory requirements for electronic component deployment. Selection between these parts is determined by packaging requirements and supply chain considerations rather than electrical or mechanical performance criteria.

The MHSD-04B-AM-PRA-TR is supplied in Tape & Reel format, suitable for automated assembly processes requiring continuous component feed. The MHSD-04B-BM-PRA-TR is supplied in Cut Tape format, appropriate for manual assembly or lower-volume production environments. Both parts maintain identical electrical performance across the 50 Ohm impedance, 9 GHz frequency range, and -40°C to 105°C operating temperature specifications.

The center contact plating difference (Gold in MHSD-04B-AM-PRA-TR versus Silver in MHSD-04B-BM-PRA-TR) does not affect functional equivalence within the specified electrical parameters. Both plating materials provide adequate contact resistance and corrosion protection within the defined operating conditions.

Frequently Asked Questions (FAQ)

Q: Can MHSD-04B-BM-PRA-TR replace MHSD-04B-AM-PRA-TR in production?

A: Yes. Both parts are electrically and mechanically equivalent across all critical parameters: 50 Ohms impedance, 9 GHz maximum frequency, through-hole right-angle solder mounting, and -40°C to 105°C operating temperature. The difference is packaging format only (Tape & Reel versus Cut Tape).

Q: What is the significance of the center contact plating difference?

A: The MHSD-04B-AM-PRA-TR features Gold plating while MHSD-04B-BM-PRA-TR features Silver plating on the center contact. Both materials provide equivalent electrical performance and corrosion resistance within the specified operating conditions and do not affect connector functionality or compatibility.

Q: Are there any compatibility issues when substituting between these parts?

A: No compatibility issues exist. Both parts share identical connector style (Miniature Coaxial Fakra Quadraxial), connector type (Plug Male Pin), termination method (Solder), and mounting configuration (Through Hole Right Angle). Mating interfaces are identical.

Q: Which part should be selected for automated assembly?

A: MHSD-04B-AM-PRA-TR in Tape & Reel packaging is designed for automated pick-and-place assembly processes. MHSD-04B-BM-PRA-TR in Cut Tape format is suitable for manual assembly or lower-volume applications.

Q: Do both parts meet current regulatory compliance?

A: Yes. Both MHSD-04B-AM-PRA-TR and MHSD-04B-BM-PRA-TR are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component use in regulated markets.

Q: What is the maximum operating frequency for these connectors?

A: Both parts operate at a maximum frequency of 9 GHz with 50 Ohms impedance, suitable for RF and microwave applications within this frequency range.

Q: Are the mating cycle ratings identical?

A: Yes. Both parts are rated for 25 mating cycles, indicating equivalent mechanical durability and connector longevity under normal use conditions.