MHS131 Equivalent & Substitute Parts

Part Overview

The MHS131 is a slide switch SP3T (single pole, three throw) rated for 200mA at 12V DC, designed for through-hole mounting applications. Manufactured by Nidec Components Corporation, this component features non-shorting contact timing (BBM), standard actuator configuration, and silver-plated contacts. The MHS131 is classified as obsolete, making identification of functionally equivalent active alternatives essential for ongoing design support and procurement continuity.

Substiute Parts

MHS131

Nidec Components CorporationIn Stock: 913MHS131 Datasheet

Current PartRFQ

CL-SB-13C-01

Nidec Components CorporationIn Stock: 1462CL-SB-13C-01 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The CL-SB-13C-01 qualifies as a direct functional substitute for the MHS131 based on the following critical parameters:

Matching Parameters:

• Circuit configuration: SP3T
• Current rating: 200mA DC
• Voltage rating: 12V DC
• Contact timing: Non-Shorting (BBM)
• Switch function: On-On-On
• Actuator type: Standard
• Actuator length: 2.00mm
• Contact finish: Silver
• Mounting type: Through Hole
• Termination style: PC Pin
• Switch travel: 2.00mm
• RoHS compliance: ROHS3 Compliant
• MSL rating: 1 (Unlimited)

Enhanced Specifications in Substitute: The CL-SB-13C-01 provides extended operating temperature range (−40°C to 85°C versus −10°C to 70°C) and increased electrical life (10,000 cycles versus 5,000 cycles), while maintaining all critical electrical and mechanical parameters required for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The CL-SB-13C-01 is the direct replacement for the obsolete MHS131. Both components are manufactured by Nidec Components Corporation and maintain identical electrical and mechanical specifications for circuit configuration, current and voltage ratings, contact timing, actuator geometry, and termination style.

The CL-SB-13C-01 is currently in active production status with higher inventory availability (1,388 pcs versus 826 pcs for MHS131). Both parts maintain ROHS3 compliance and unlimited moisture sensitivity rating, ensuring regulatory and environmental compatibility.

The CL-SB-13C-01 offers improved performance characteristics including extended operating temperature range and doubled electrical life rating, providing enhanced reliability for long-term applications without requiring circuit redesign.

Frequently Asked Questions (FAQ)

Q: Can the CL-SB-13C-01 be used as a direct replacement for the MHS131 without circuit modification?

A: Yes. The CL-SB-13C-01 maintains identical electrical ratings (200mA, 12V DC), circuit configuration (SP3T), contact timing (Non-Shorting BBM), actuator geometry (2.00mm length and travel), and through-hole PC pin termination. No circuit redesign is required.

Q: What are the key differences between these parts?

A: The CL-SB-13C-01 provides extended operating temperature range (−40°C to 85°C versus −10°C to 70°C) and increased electrical life (10,000 cycles versus 5,000 cycles). The MHS131 is obsolete; the CL-SB-13C-01 is active production.

Q: Are both parts RoHS compliant?

A: Yes. Both the MHS131 and CL-SB-13C-01 are ROHS3 compliant with MSL rating 1 (unlimited moisture sensitivity).

Q: What is the difference in operating force specifications?

A: The MHS131 specifies 50–400gf operating force range. The CL-SB-13C-01 specifies 160/260gf. Both values fall within acceptable operating parameters for standard slide switch actuation.

Q: Which part should be selected for new designs?

A: The CL-SB-13C-01 should be selected for new designs. It is in active production status, offers extended temperature and cycle life ratings, and is manufactured by the same supplier as the obsolete MHS131.