MFEV852,599 RFID Reader Module 13.56MHz Equivalent & Substitute Parts

Part Overview

The MFEV852,599 is a Read Only RFID reader module operating at 13.56MHz, manufactured by NXP USA Inc. under the MIFARE® series. This module is designed for ISO 14443 compliant RFID applications requiring read-only functionality at 13.56MHz frequency.

The MFEV852,599 has reached obsolete product status. Identifying equivalent and substitute parts is necessary to maintain supply chain continuity for applications currently utilizing this module or for new designs requiring comparable read-only RFID reader functionality at 13.56MHz.

Substiute Parts

MFEV852,599

NXP USA Inc.In Stock: 997MFEV852,599 Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MFEV852,599 must satisfy the following critical parameters to ensure functional compatibility:

• Frequency: 13.56MHz operation
• Reader Type: Read Only capability
• Standards Compliance: ISO 14443 support
• Series: MIFARE® family preferred for direct compatibility
• RoHS & REACH Compliance: ROHS3 Compliant and REACH Unaffected status
• Moisture Sensitivity: MSL 1 or equivalent

No manufacturer-recommended substitute parts have been provided for this module. Selection of alternative RFID reader modules must be based strictly on matching these core electrical and compliance parameters.

Parameter Comparison

No substitute parts are currently available for comparison. When evaluating alternative 13.56MHz Read Only RFID reader modules, ensure the candidate part matches all parameters listed in the Key Parameters table above.

Engineering Selection Recommendations

When sourcing replacements for the obsolete MFEV852,599:

• Verify that candidate parts maintain 13.56MHz frequency operation and Read Only functionality
• Confirm ISO 14443 standards compliance for application compatibility
• Ensure ROHS3 compliance and REACH Unaffected status for regulatory requirements
• Validate MSL 1 moisture sensitivity rating or equivalent for storage and handling conditions
• Confirm MIFARE® series compatibility if the application depends on proprietary MIFARE® features

Selection must be based on these provided specifications without assumptions regarding undocumented technical capabilities.

Frequently Asked Questions (FAQ)

Q: What makes a part a valid substitute for the MFEV852,599?

A: A valid substitute must operate at 13.56MHz, provide Read Only RFID reader functionality, comply with ISO 14443 standards, maintain ROHS3 and REACH compliance, and match the MSL 1 moisture sensitivity rating.

Q: Can I use a Read/Write RFID reader module as a substitute?

A: No. The MFEV852,599 is specified as Read Only. Substitutes must maintain this functional limitation unless the application requirements have changed.

Q: Is MIFARE® series compatibility required for substitution?

A: MIFARE® series compatibility is preferred for direct functional equivalence. However, any 13.56MHz Read Only ISO 14443 compliant module meeting all specified parameters may be evaluated for your specific application.

Q: What is the significance of the MSL 1 rating?

A: MSL 1 indicates unlimited moisture sensitivity, meaning the component has no moisture-related storage or handling restrictions. Substitute parts should maintain this rating or better.

Q: Are there packaging considerations for substitution?

A: Packaging information was not provided for the MFEV852,599. Verify mechanical compatibility with your application's form factor and interface requirements when evaluating substitute modules.