MF1/4DC8200F Equivalent & Substitute Parts

Part Overview

The MF1/4DC8200F is a 820 Ohms ±1% 0.25W through-hole resistor manufactured by KOA Speer Electronics, Inc. This metal film axial resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The component is currently in active production status with 783 pieces available in bulk packaging. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility and supply chain optimization.

Substiute Parts

MF1/4DC8200F

KOA Speer Electronics, Inc.In Stock: 845MF1/4DC8200F Datasheet

Current PartRFQ

MF1/4DCT52R8200F

KOA Speer Electronics, Inc.In Stock: 6007MF1/4DCT52R8200F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MF1/4DC8200F is determined by equivalence across the following critical parameters:

• Resistance value: 820 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Package case: Axial
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive qualification: AEC-Q200
• Physical dimensions: 0.091" Dia × 0.248" L (2.30mm × 6.30mm)
• Termination count: 2
• Compliance: ROHS3, REACH Unaffected

The identified substitute part maintains identical electrical performance and mechanical compatibility. The only variation is in supplier packaging format, which does not affect component functionality or circuit performance.

Parameter Comparison

Engineering Selection Recommendations

Both MF1/4DC8200F and MF1/4DCT52R8200F are active production components from KOA Speer Electronics, Inc., with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts should be based on procurement and assembly requirements:

The MF1/4DC8200F in bulk packaging is suitable for high-volume manual assembly or bin storage applications. The MF1/4DCT52R8200F in cut tape packaging is optimized for automated pick-and-place assembly processes and tape-reel handling systems. Both components deliver identical electrical performance and mechanical fit in axial through-hole PCB applications.

Frequently Asked Questions (FAQ)

Q: Can MF1/4DCT52R8200F replace MF1/4DC8200F in circuit design?

A: Yes. Both parts are electrically and mechanically identical. The MF1/4DCT52R8200F can be substituted directly in any application where MF1/4DC8200F is specified, with no circuit performance impact.

Q: What is the difference between bulk and cut tape packaging?

A: Bulk packaging supplies loose components suitable for manual assembly or storage in bins. Cut tape packaging supplies components on continuous tape with carrier, optimized for automated assembly equipment. The resistor component itself is identical in both formats.

Q: Are both parts automotive qualified?

A: Yes. Both MF1/4DC8200F and MF1/4DCT52R8200F meet AEC-Q200 automotive qualification standards and are suitable for automotive circuit applications.

Q: Do these parts have identical physical dimensions?

A: Yes. Both parts measure 0.091" diameter × 0.248" length (2.30mm × 6.30mm) and are compatible with standard axial through-hole PCB footprints.

Q: What compliance certifications apply to both parts?

A: Both parts are ROHS3 compliant and REACH unaffected. No additional compliance documentation is required for substitution.