MF1/4CCT52R2001F Equivalent & Substitute Parts

Part Overview

The MF1/4CCT52R2001F is a 2 kOhms ±1% 0.25W through-hole resistor manufactured by KOA Speer Electronics, Inc. This metal film axial resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The part is currently in active production status with 5,947 units available in stock. Substitute parts are identified when packaging format or inventory availability requires alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

MF1/4CCT52R2001F

KOA Speer Electronics, Inc.In Stock: 6004MF1/4CCT52R2001F Datasheet

Current PartRFQ

MF1/4CC2001F

KOA Speer Electronics, Inc.In Stock: 1652MF1/4CC2001F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MF1/4CCT52R2001F is determined by strict equivalence across the following parameters:

• Resistance value: 2 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Package configuration: Axial
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive qualification: AEC-Q200
• Physical dimensions: 0.091" Dia x 0.248" L (2.30mm x 6.30mm)

The identified substitute part differs only in packaging format (Bulk versus Cut Tape), which does not affect electrical performance or mechanical compatibility. Both parts are manufactured by the same supplier and maintain identical specifications for all functional parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the MF1/4CCT52R2001F and MF1/4CC2001F are active production parts from KOA Speer Electronics, Inc., with full compliance to ROHS3 and REACH regulations. Selection between these parts should be based on packaging requirements and inventory availability. The Cut Tape format (MF1/4CCT52R2001F) is suitable for automated assembly processes, while the Bulk format (MF1/4CC2001F) accommodates manual assembly or alternative handling procedures. Both parts maintain identical electrical performance and automotive AEC-Q200 qualification across the full operating temperature range of -55°C to 155°C.

Frequently Asked Questions (FAQ)

Q: Can MF1/4CC2001F be used as a direct replacement for MF1/4CCT52R2001F?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: Cut Tape versus Bulk. This distinction does not affect circuit performance or component functionality.

Q: What is the difference between Cut Tape and Bulk packaging?

A: Cut Tape (CT) packaging provides individual components on a continuous tape suitable for automated pick-and-place assembly equipment. Bulk packaging provides loose components for manual assembly or alternative handling methods. Electrical specifications remain unchanged.

Q: Are both parts suitable for automotive applications?

A: Yes. Both MF1/4CCT52R2001F and MF1/4CC2001F carry AEC-Q200 automotive qualification and are rated for the full automotive temperature range of -55°C to 155°C.

Q: What parameters must remain identical for substitution?

A: Resistance value (2 kOhms), tolerance (±1%), power rating (0.25W), composition (Metal Film), temperature coefficient (±50ppm/°C), operating temperature range (-55°C to 155°C), and physical dimensions (0.091" Dia x 0.248" L) must all remain unchanged for direct substitution.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant and REACH unaffected. Regulatory and environmental compliance is identical.