MF1/4CC2001F Equivalent & Substitute Parts

Part Overview

The MF1/4CC2001F is a 2 kOhms ±1% 0.25W through-hole axial resistor manufactured by KOA Speer Electronics, Inc. This metal film resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The part is currently in active production status with 1574 units available in bulk packaging. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility and supply chain optimization.

Substiute Parts

MF1/4CC2001F

KOA Speer Electronics, Inc.In Stock: 1652MF1/4CC2001F Datasheet

Current PartRFQ

MF1/4CCT52R2001F

KOA Speer Electronics, Inc.In Stock: 6004MF1/4CCT52R2001F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between MF1/4CC2001F and MF1/4CCT52R2001F is valid based on the following criteria:

Identical Electrical Parameters:

• Resistance value: 2 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C to 155°C

Identical Mechanical Parameters:

• Composition: Metal Film
• Package case: Axial
• Physical dimensions: 0.091" Dia × 0.248" L (2.30mm × 6.30mm)
• Number of terminations: 2

Identical Compliance & Certifications:

• Automotive AEC-Q200 qualification
• RoHS3 compliance
• REACH unaffected status
• ECCN: EAR99
• HTSUS: 8533.21.0090

Packaging Difference: The only distinction between these parts is the supply packaging format: MF1/4CC2001F is supplied in bulk packaging, while MF1/4CCT52R2001F is supplied in cut tape (CT) format. This difference does not affect electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

Both MF1/4CC2001F and MF1/4CCT52R2001F are active production parts from KOA Speer Electronics, Inc., with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts should be based on procurement and assembly requirements:

MF1/4CC2001F (Bulk Packaging): Suitable for high-volume manufacturing environments with automated handling systems and internal tape/reel conversion capabilities. Bulk packaging reduces per-unit material costs for large production runs.

MF1/4CCT52R2001F (Cut Tape Packaging): Suitable for pick-and-place assembly operations, lower-volume production, and applications requiring direct integration with automated component feeders. Cut tape format eliminates intermediate packaging conversion steps.

Both parts meet identical electrical specifications, mechanical dimensions, and automotive compliance requirements. The substitution is valid for any application where the original part is specified, provided the assembly process accommodates the packaging format difference.

Frequently Asked Questions (FAQ)

Q: Can MF1/4CCT52R2001F be used as a direct replacement for MF1/4CC2001F?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (bulk versus cut tape). Direct substitution is valid provided your assembly process can accommodate the cut tape format.

Q: Are there any performance differences between bulk and cut tape versions?

A: No. The resistor elements, specifications, and performance characteristics are identical. Packaging format does not affect electrical or mechanical performance.

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both MF1/4CC2001F and MF1/4CCT52R2001F carry AEC-Q200 qualification and are suitable for automotive applications within the specified operating temperature range of -55°C to 155°C.

Q: What is the significance of the ±1% tolerance specification?

A: The ±1% tolerance indicates the maximum deviation of the actual resistance value from the nominal 2 kOhms specification. This tight tolerance is suitable for precision circuit applications requiring stable resistor values.

Q: Are both parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory requirements for electronic component manufacturing and distribution.

Q: Which packaging format should I select for my application?

A: Selection depends on your assembly process. Bulk packaging is optimal for high-volume automated manufacturing with tape conversion capability. Cut tape packaging is optimal for pick-and-place assembly systems and lower-volume production runs.