MF1/4CC1503F Equivalent & Substitute Parts

Part Overview

The MF1/4CC1503F is a 150 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by KOA Speer Electronics, Inc., this component is designed for automotive applications and meets AEC-Q200 qualification standards. The part maintains active product status with 916 units currently in stock. Substitute parts may be required due to packaging format availability, supply chain considerations, or specific procurement requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

MF1/4CC1503F

KOA Speer Electronics, Inc.In Stock: 933MF1/4CC1503F Datasheet

Current PartRFQ

MF1/4CCT52R1503F

KOA Speer Electronics, Inc.In Stock: 5857MF1/4CCT52R1503F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MF1/4CC1503F is determined by strict equivalence across the following critical parameters: resistance value (150 kOhms), tolerance grade (±1%), power rating (0.25W), composition type (metal film), package configuration (axial), temperature coefficient (±50ppm/°C), operating temperature range (-55°C to 155°C), and automotive qualification status (AEC-Q200). The primary variable between the main part and its substitute is packaging format: the main part is supplied in bulk packaging, while the substitute part is available in cut tape (CT) format. Both parts share identical electrical performance characteristics and environmental compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the MF1/4CC1503F and MF1/4CCT52R1503F are active products manufactured by KOA Speer Electronics, Inc., with full ROHS3 compliance and AEC-Q200 automotive qualification. Selection between these parts should be based on procurement and assembly requirements. The bulk-packaged MF1/4CC1503F is suitable for applications requiring standard packaging formats. The cut tape variant MF1/4CCT52R1503F accommodates automated assembly processes and high-volume production environments. Both parts deliver identical electrical performance and environmental operating specifications across all critical parameters.

Frequently Asked Questions (FAQ)

Q: Can MF1/4CCT52R1503F replace MF1/4CC1503F in circuit applications? A: Yes. Both parts are electrically and mechanically identical, differing only in packaging format (bulk versus cut tape). Circuit performance is unaffected by this packaging distinction.

Q: What is the primary difference between these two part numbers? A: The MF1/4CC1503F is supplied in bulk packaging, while the MF1/4CCT52R1503F is supplied in cut tape format. All electrical specifications, physical dimensions, and compliance certifications remain identical.

Q: Are both parts suitable for automotive applications? A: Yes. Both the MF1/4CC1503F and MF1/4CCT52R1503F carry AEC-Q200 automotive qualification and are rated for operating temperatures from -55°C to 155°C.

Q: Does packaging format affect component reliability or performance? A: No. Packaging format affects only handling, storage, and assembly methodology. Electrical performance, tolerance, temperature coefficient, and reliability characteristics are identical between bulk and cut tape formats.

Q: Which part should be selected for automated assembly? A: The MF1/4CCT52R1503F in cut tape format is optimized for automated pick-and-place assembly processes. The bulk-packaged MF1/4CC1503F is suitable for manual assembly or applications where packaging format is not a constraint.