MEM2012T10R0 Equivalent & Substitute Parts

Part Overview

The MEM2012T10R0 is a 3rd order LC (T-Type) EMI filter manufactured by TDK Corporation, designed for low-pass filtering applications in data line circuits for mobile devices. This component operates at a 10 MHz cutoff frequency with 100 mA current capacity in a compact 0805 (2012 Metric) surface mount package.

The MEM2012T10R0 is classified as obsolete. Identifying suitable substitute parts is necessary to maintain design continuity and ensure component availability for production and maintenance applications.

Key Parameters

Parameter	Value
Manufacturer Part Number	MEM2012T10R0
Manufacturer	TDK Corporation
Series	MEM
Product Status	Obsolete
Filter Type	Low Pass, 3rd Order LC (T-Type)
Number of Channels	1
Center / Cutoff Frequency	10 MHz
Attenuation Value	20 dB @ 40 MHz ~ 900 MHz
Current Rating	100 mA
Voltage - Rated	10 V
Package / Case	0805 (2012 Metric), 3 PC Pad
Size / Dimension	0.079" L x 0.049" W (2.00 mm x 1.25 mm)
Height	0.087" (2.20 mm)
Operating Temperature	-40°C ~ 85°C
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Applications	Data Lines for Mobile Devices

Substitute Part Grouping Explanation

Substitution of the MEM2012T10R0 is based on the following critical parameters that must remain compatible:

Package / Case: 0805 (2012 Metric), 3 PC Pad — physical and electrical interface compatibility
Filter Technology: LC (T-Type), 3rd Order Low Pass — functional filtering architecture
Number of Channels: 1 — circuit topology requirement
Current Rating: 100 mA — electrical load capacity
Voltage Rating: 10 V — maximum operating voltage
Operating Temperature Range: -40°C ~ 85°C — thermal operating envelope
Mounting Type: Surface Mount — assembly compatibility

The MEM2012S25R0T001 qualifies as a substitute part because it maintains all critical compatibility parameters while offering enhanced performance characteristics through a higher cutoff frequency (25 MHz) and improved attenuation (30 dB @ 70 MHz ~ 2 GHz).

Parameter Comparison

Parameter	MEM2012T10R0 (Main Part)	MEM2012S25R0T001 (Substitute)
Manufacturer	TDK Corporation	TDK Corporation
Series	MEM	MEM
Product Status	Obsolete	Active
Filter Type	Low Pass, 3rd Order LC (T-Type)	Low Pass, 3rd Order LC (T-Type)
Number of Channels	1	1
Center / Cutoff Frequency	10 MHz	25 MHz
Attenuation Value	20 dB @ 40 MHz ~ 900 MHz	30 dB @ 70 MHz ~ 2 GHz
Current Rating	100 mA	100 mA
Voltage - Rated	10 V	10 V
Package / Case	0805 (2012 Metric), 3 PC Pad	0805 (2012 Metric), 3 PC Pad
Size / Dimension	0.079" L x 0.049" W (2.00 mm x 1.25 mm)	0.079" L x 0.049" W (2.00 mm x 1.25 mm)
Height	0.087" (2.20 mm)	0.037" (0.95 mm)
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)
Applications	Data Lines for Mobile Devices	Data Lines for Mobile Devices
RoHS Status	Not specified	ROHS3 Compliant

Engineering Selection Recommendations

The MEM2012S25R0T001 is the qualified substitute for the obsolete MEM2012T10R0. Selection is based on the following factors:

Product Status: The MEM2012S25R0T001 is active and in production, ensuring long-term availability and supply chain continuity compared to the obsolete MEM2012T10R0.

Compliance: The MEM2012S25R0T001 carries ROHS3 compliance certification, meeting current regulatory requirements for electronic components in consumer and industrial applications.

Physical Compatibility: Both parts share identical package dimensions (0805 / 2012 Metric) and pad configuration, enabling direct PCB layout compatibility without redesign.

Electrical Compatibility: Both parts maintain the same current rating (100 mA), voltage rating (10 V), operating temperature range (-40°C ~ 85°C), and filter architecture (3rd order LC T-Type, single channel).

Performance Enhancement: The MEM2012S25R0T001 provides superior attenuation characteristics (30 dB @ 70 MHz ~ 2 GHz versus 20 dB @ 40 MHz ~ 900 MHz), offering improved EMI filtering performance across a broader frequency spectrum.

Frequently Asked Questions (FAQ)

Q: Can the MEM2012S25R0T001 be used as a direct replacement for the MEM2012T10R0?

A: Yes. Both parts share identical package specifications (0805 / 2012 Metric, 3 PC Pad), current rating (100 mA), voltage rating (10 V), and operating temperature range (-40°C ~ 85°C). The physical footprint and electrical interface are fully compatible.

Q: What is the primary difference between these two parts?

A: The MEM2012S25R0T001 operates at a higher cutoff frequency (25 MHz versus 10 MHz) and provides greater attenuation (30 dB @ 70 MHz ~ 2 GHz versus 20 dB @ 40 MHz ~ 900 MHz). Both maintain the same 3rd order LC (T-Type) filter architecture and single-channel configuration.

Q: Does the height difference affect PCB assembly?

A: The MEM2012S25R0T001 has a lower profile (0.037" / 0.95 mm versus 0.087" / 2.20 mm). This reduced height is advantageous for compact designs and does not create assembly or clearance issues. The footprint remains identical.

Q: Are there any compliance differences between the two parts?

A: The MEM2012S25R0T001 is certified ROHS3 compliant, meeting current environmental and regulatory standards. The MEM2012T10R0 compliance status is not specified in available documentation.

Q: What applications are these filters designed for?

A: Both parts are specified for data line filtering in mobile device applications, providing EMI suppression for high-speed signal integrity in compact form factors.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message