MEC6-130-02-L-D-RA1-TR Equivalent & Substitute Parts

Part Overview

The MEC6-130-02-L-D-RA1-TR is a 60-position female card edge connector manufactured by Samtec Inc. in the MEC6-RA series. This connector features dual-edge configuration with gold-plated phosphor bronze contacts, surface mount right-angle termination, and is designed for applications requiring high-density interconnection on printed circuit boards. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when packaging or inventory requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

MEC6-130-02-L-D-RA1-TR

Samtec Inc.In Stock: 1102MEC6-130-02-L-D-RA1-TR Datasheet

Current PartRFQ

MEC6-130-02-L-D-RA1

Samtec Inc.In Stock: 2062MEC6-130-02-L-D-RA1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MEC6-130-02-L-D-RA1-TR is permissible with MEC6-130-02-L-D-RA1 based on the following criteria:

The substitute part maintains identical electrical and mechanical specifications across all critical parameters: 60-position female configuration, 0.025" (0.64mm) pitch, dual-edge card type, 0.062" (1.57mm) card thickness, surface mount right-angle mounting, phosphor bronze gold-plated contacts, and Liquid Crystal Polymer insulation. Operating temperature range, RoHS3 compliance, and MSL rating remain unchanged.

The only difference between these parts is packaging format: the main part is supplied in Tape & Reel (TR) format, while the substitute is supplied in Tray format. Both packaging methods preserve component integrity and are suitable for automated assembly processes. This substitution is valid when tray packaging meets procurement and assembly requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the MEC6-130-02-L-D-RA1-TR and MEC6-130-02-L-D-RA1 are active production parts with ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on packaging requirements and assembly process compatibility. Tape & Reel packaging is optimized for high-volume automated pick-and-place assembly, while Tray packaging is suitable for manual assembly or lower-volume production runs. Both parts carry identical product status and regulatory certifications, making them functionally interchangeable from an electrical and mechanical standpoint.

Frequently Asked Questions (FAQ)

Q: Can MEC6-130-02-L-D-RA1 be used as a direct replacement for MEC6-130-02-L-D-RA1-TR?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format only. MEC6-130-02-L-D-RA1-TR uses Tape & Reel packaging, while MEC6-130-02-L-D-RA1 uses Tray packaging. Selection depends on assembly process requirements.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution is valid when the following parameters remain identical: number of positions (60), gender (Female), pitch (0.025"), card type (Dual Edge), card thickness (0.062"), number of rows (2), mounting type (Surface Mount, Right Angle), contact material (Phosphor Bronze), contact finish (Gold, 10.0µin), insulation material (LCP), and operating temperature range (-55°C ~ 125°C).

Q: Does packaging format affect electrical performance?

A: No. Tape & Reel and Tray packaging formats do not affect electrical or mechanical performance. Both preserve component integrity and are suitable for PCB assembly.

Q: Are both parts compliant with current regulations?

A: Yes. Both MEC6-130-02-L-D-RA1-TR and MEC6-130-02-L-D-RA1 are ROHS3 compliant, REACH unaffected, and carry MSL rating 1 (Unlimited).

Q: What is the pitch specification for this connector?

A: The pitch is 0.025" (0.64mm), which defines the center-to-center spacing between adjacent contact positions.