Circuit Breaker ME1-M-12-625-1-A16-2-J Equivalent & Substitute Parts

Part Overview

The ME1-M-12-625-1-A16-2-J is a magnetic hydraulic delay circuit breaker manufactured by Carling Technologies, rated for 25A at 250V AC and 80V DC. This single-pole rocker panel mount breaker is designed for overcurrent protection in AC and DC applications. The product maintains active status with full compliance to RoHS3 and REACH standards. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate alternative suppliers.

Substiute Parts

ME1-M-12-625-1-A16-2-J

Carling TechnologiesIn Stock: 850ME1-M-12-625-1-A16-2-J Datasheet

Current PartRFQ

IEGBX1-1REC5-51F-25.0-A-N3-V

Sensata-AirpaxIn Stock: 906IEGBX1-1REC5-51F-25.0-A-N3-V Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ME1-M-12-625-1-A16-2-J is determined by strict equivalence across the following critical parameters:

• Current Rating: 25A (exact match required)
• Voltage Rating - AC: 250V (exact match required)
• Voltage Rating - DC: 80V (exact match required)
• Breaker Type: Magnetic (Hydraulic Delay) (exact match required)
• Mounting Type: Panel Mount (exact match required)
• Actuator Type: Rocker (exact match required)
• Number of Poles: 1 (exact match required)
• Illumination: None (exact match required)

The identified substitute part meets all specified electrical and mechanical parameters, ensuring functional and physical compatibility within the same application context.

Parameter Comparison

Engineering Selection Recommendations

Both the ME1-M-12-625-1-A16-2-J and IEGBX1-1REC5-51F-25.0-A-N3-V maintain active product status and comply with applicable regulatory standards. The primary part carries UL489A, TUV, and CCC approvals. The substitute part carries UL1077, TUV, and CSA approvals. Selection between these parts should be based on the specific approval requirements of the end application. Both parts are classified under ECCN EAR99 and HTSUS 8536.20.0020. Current inventory levels are 755 units for the primary part and 820 units for the substitute part.

Frequently Asked Questions (FAQ)

Q: Can IEGBX1-1REC5-51F-25.0-A-N3-V be used as a direct replacement for ME1-M-12-625-1-A16-2-J?

A: Yes. Both parts are rated for 25A at 250V AC and 80V DC, feature magnetic hydraulic delay operation, single-pole rocker panel mount configuration, and carry equivalent electrical and mechanical specifications.

Q: Are there differences in approval certifications between these parts?

A: Yes. The ME1-M-12-625-1-A16-2-J carries UL489A, TUV, and CCC approvals. The IEGBX1-1REC5-51F-25.0-A-N3-V carries UL1077, TUV, and CSA approvals. Verify that the substitute part's certifications satisfy the requirements of your specific application and regulatory jurisdiction.

Q: What is the significance of the different approval standards?

A: UL489A and UL1077 are distinct UL standards for circuit breakers. CCC is the China Compulsory Certification mark, while CSA is the Canadian Standards Association certification. The applicable standard depends on the geographic market and end-use requirements of the equipment.

Q: Are both parts available in the same packaging format?

A: Yes. Both parts are supplied in bulk packaging.

Q: What is the Moisture Sensitivity Level (MSL) for the primary part?

A: The MSL is not specified for the ME1-M-12-625-1-A16-2-J. The substitute part IEGBX1-1REC5-51F-25.0-A-N3-V is rated MSL 1 (Unlimited).

Q: Do both parts comply with environmental regulations?

A: The ME1-M-12-625-1-A16-2-J is RoHS3 Compliant and REACH Unaffected. The IEGBX1-1REC5-51F-25.0-A-N3-V is RoHS Compliant. Confirm that the substitute part meets all environmental compliance requirements for your application.