MD015C102MAB Equivalent & Substitute Parts

Part Overview

The MD015C102MAB is a 1000 pF ceramic capacitor manufactured by KYOCERA AVX in the DIPGuard® MD series. This through-hole component operates across a temperature range of -55°C to 125°C with X7R temperature coefficient characteristics. The part is currently active in production with 931 units in stock. Substitute parts are identified when equivalent capacitance and package compatibility are maintained while allowing for improvements in tolerance, voltage rating, or other electrical parameters within the same physical form factor.

Substiute Parts

MD015C102MAB

KYOCERA AVXIn Stock: 975MD015C102MAB Datasheet

Current PartRFQ

MD011C102KAB

KYOCERA AVXIn Stock: 969MD011C102KAB Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MD015C102MAB is based on the following criteria:

• Capacitance Value: Must remain 1000 pF (no deviation permitted)
• Package Type: Must be 2-DIP through-hole configuration
• Physical Dimensions: Must match 0.260" L x 0.100" W with 0.325" lead spacing
• Temperature Coefficient: Must be X7R
• Operating Temperature Range: Must support -55°C ~ 125°C
• Series: DIPGuard® MD series

The MD011C102KAB qualifies as a substitute because it maintains identical capacitance, package, dimensions, temperature coefficient, and operating range. The substitute offers an upgraded voltage rating (100V vs. 50V) and improved tolerance (±10% vs. ±20%), making it suitable for applications requiring higher voltage margins or tighter capacitance specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the MD015C102MAB and MD011C102KAB are active production components from KYOCERA AVX with identical regulatory compliance profiles (RoHS non-compliant, REACH Affected, EAR99 classification). The MD011C102KAB substitute provides enhanced electrical performance through higher voltage rating and tighter tolerance specifications while maintaining full physical and thermal compatibility. Selection between these parts depends on circuit voltage requirements and capacitance tolerance specifications of the application.

Frequently Asked Questions (FAQ)

Q: Can MD011C102KAB replace MD015C102MAB in existing designs?

A: Yes. Both parts share identical capacitance (1000 pF), package type (2-DIP), physical dimensions (0.260" L x 0.100" W), lead spacing (0.325"), temperature coefficient (X7R), and operating temperature range (-55°C ~ 125°C). The substitute is physically and electrically interchangeable at the board level.

Q: What are the differences between these parts?

A: The MD011C102KAB offers a higher voltage rating (100V vs. 50V) and improved tolerance (±10% vs. ±20%). These represent enhancements that do not affect compatibility in applications designed for the original 50V, ±20% specification.

Q: Are there any compliance or certification differences?

A: No. Both parts carry identical regulatory classifications: RoHS non-compliant, REACH Affected, ECCN EAR99, and HTSUS 8532.23.0060.

Q: What is the lead spacing for these 2-DIP capacitors?

A: Both parts have a lead spacing of 0.325" (8.25mm), ensuring compatibility with standard through-hole PCB layouts designed for this package type.

Q: Does the improved tolerance of MD011C102KAB affect circuit performance?

A: The ±10% tolerance of the substitute is tighter than the ±20% tolerance of the original part. In applications where capacitance tolerance is not a limiting factor, this represents an improvement. In applications with strict tolerance requirements, the tighter specification of the substitute is beneficial.