MCT6 Optoisolator Equivalent & Substitute Parts

Part Overview

The MCT6 is a dual-channel optoisolator with transistor output, rated for 5300Vrms isolation voltage. This component is designed for applications requiring galvanic isolation between input and output circuits with DC input control and transistor switching capability. The MCT6 is classified as Active product status with 174,300 units in current inventory. Alternative part numbers may be required due to packaging constraints, lead time availability, or specific application mounting requirements while maintaining electrical and functional equivalence.

Substiute Parts

MCT6

Isocom Components 2004 LTDIn Stock: 174356MCT6 Datasheet

Current PartRFQ

MCT6X

Isocom ComponentsIn Stock: 2988MCT6X Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MCT6 is determined by strict equivalence across the following critical parameters:

• Number of Channels: 2 channels required
• Voltage - Isolation: 5300Vrms minimum
• Current Transfer Ratio: 20% @ 10mA minimum
• Output Type: Transistor output configuration
• Voltage - Output (Max): 30V
• Current - Output / Channel: 50mA
• Vce Saturation (Max): 400mV
• Operating Temperature Range: -25°C ~ 100°C
• Input Type: DC
• Mounting Type: Through Hole

The MCT6X meets all electrical and functional parameters required for direct substitution. Both parts share identical isolation voltage, channel count, output current capability, and thermal operating range. Packaging differences exist but do not affect electrical performance or functional compatibility in through-hole applications.

Parameter Comparison

Engineering Selection Recommendations

Both MCT6 and MCT6X are Active product status components manufactured by Isocom Components and maintain full compliance with ROHS3 and REACH regulations. Selection between these parts should be based on:

• PCB layout and board space availability for through-hole mounting
• Supplier inventory and lead time requirements
• Packaging format preference (MCT6 standard packaging vs. MCT6X tube packaging)
• Cost considerations based on current market availability

All electrical parameters, isolation ratings, and functional characteristics are identical. Both components are suitable for direct substitution in applications requiring dual-channel optoisolation at 5300Vrms with transistor output switching.

Frequently Asked Questions (FAQ)

Q: Can MCT6X replace MCT6 in existing designs? A: Yes. MCT6X is a direct electrical equivalent with identical isolation voltage, channel count, output current, and switching characteristics. Through-hole mounting compatibility is maintained.

Q: Are there differences in isolation voltage between MCT6 and MCT6X? A: No. Both parts are rated for 5300Vrms isolation voltage with identical current transfer ratio specifications.

Q: What is the difference between MCT6 and MCT6X packaging? A: MCT6 uses standard packaging while MCT6X is supplied in tube packaging. Both maintain the same 8-DIP (0.300", 7.62mm) physical form factor for through-hole PCB mounting.

Q: Do both parts meet the same compliance standards? A: Yes. Both MCT6 and MCT6X are ROHS3 Compliant and REACH Unaffected, meeting identical regulatory requirements.

Q: What is the maximum output current per channel? A: Both MCT6 and MCT6X support 50mA maximum output current per channel with 400mV maximum Vce saturation.

Q: Are the switching characteristics identical? A: Yes. Both parts have identical rise time (4µs) and fall time (3µs) specifications and operate across the same temperature range (-25°C ~ 100°C).