MCT06030D3602DP500 Equivalent & Substitute Parts

Part Overview

The MCT06030D3602DP500 is a 36 kOhm ±0.5% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W power dissipation. Manufactured by Vishay Beyschlag/Draloric/BC Components under the MCT Professional series, this component is actively produced and RoHS3 compliant. Substitute parts are identified when design requirements demand improved tolerance specifications, automotive-grade certifications, or alternative packaging formats while maintaining electrical and mechanical compatibility.

Substiute Parts

MCT06030D3602DP500

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1008MCT06030D3602DP500 Datasheet

Current PartRFQ

RT0603DRD0736KL

YAGEOIn Stock: 6005RT0603DRD0736KL Datasheet

DirectRFQ

ERA-3APB363V

Panasonic Electronic ComponentsIn Stock: 14784ERA-3APB363V Datasheet

UpgradeRFQ

ERA-3ARB363V

Panasonic Electronic ComponentsIn Stock: 5553ERA-3ARB363V Datasheet

UpgradeRFQ

ERA-3ARW363V

Panasonic Electronic ComponentsIn Stock: 7562ERA-3ARW363V Datasheet

UpgradeRFQ

RG1608P-363-B-T5

SusumuIn Stock: 52475RG1608P-363-B-T5 Datasheet

UpgradeRFQ

RT0603BRD0736KL

YAGEOIn Stock: 38872RT0603BRD0736KL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 36 kOhms (exact match required)
• Package: 0603 (1608 Metric) (exact match required)
• Power rating: 0.1W minimum
• Composition: Thin Film
• Operating temperature range: -55°C to 155°C minimum
• RoHS3 compliance

Allowable Variations:

• Tolerance: May be equal to or tighter than ±0.5%
• Temperature coefficient: May be equal to or lower than ±25ppm/°C
• Packaging format: Tape & Reel (TR) or Cut Tape (CT) formats are interchangeable
• Features: Additional certifications (AEC-Q200, Anti-Sulfur) do not prevent substitution

All identified substitute parts meet or exceed the electrical and mechanical specifications of the MCT06030D3602DP500.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Same Tolerance): RT0603DRD0736KL (YAGEO) provides electrical equivalence with identical tolerance (±0.5%) and temperature coefficient (±25ppm/°C). This part is suitable for direct replacement in applications where the original specification is sufficient. Packaging format differs (Cut Tape vs. Tape & Reel), which may affect procurement and assembly workflows.

Upgraded Tolerance Options: ERA-3APB363V, ERA-3ARB363V, ERA-3ARW363V (Panasonic), RT0603BRD0736KL (YAGEO), and RG1608P-363-B-T5 (Susumu) all provide tighter tolerance specifications (±0.1% or ±0.05%) compared to the original ±0.5%. These parts are suitable for applications requiring improved accuracy. ERA-3ARW363V offers the tightest tolerance at ±0.05% with the lowest temperature coefficient (±10ppm/°C).

Automotive-Grade Selection: ERA-3APB363V, ERA-3ARB363V, ERA-3ARW363V, and RG1608P-363-B-T5 carry AEC-Q200 automotive qualification. These parts are appropriate for automotive applications or designs requiring automotive-grade component reliability.

Anti-Sulfur Feature: MCT06030D3602DP500 and RG1608P-363-B-T5 include anti-sulfur protection. RG1608P-363-B-T5 combines anti-sulfur protection with AEC-Q200 certification and ±0.1% tolerance.

All substitute parts maintain RoHS3 compliance, MSL Level 1 rating, and the -55°C to 155°C operating temperature range of the original component.

Frequently Asked Questions (FAQ)

Q: Can RT0603DRD0736KL replace MCT06030D3602DP500 directly? A: Yes. RT0603DRD0736KL matches all electrical specifications (36 kOhms, ±0.5%, 0.1W, ±25ppm/°C) and package dimensions (0603). The primary difference is packaging format (Cut Tape vs. Tape & Reel), which does not affect electrical performance.

Q: What is the difference between the Panasonic ERA-3A variants? A: ERA-3APB363V provides ±0.1% tolerance with ±15ppm/°C temperature coefficient. ERA-3ARB363V provides ±0.1% tolerance with ±10ppm/°C temperature coefficient. ERA-3ARW363V provides ±0.05% tolerance with ±10ppm/°C temperature coefficient. All three carry AEC-Q200 certification. Selection depends on tolerance and temperature stability requirements.

Q: Is AEC-Q200 certification required for my application? A: AEC-Q200 certification is required only for automotive applications or designs subject to automotive reliability standards. For general industrial or consumer applications, non-automotive-grade parts (RT0603DRD0736KL, RT0603BRD0736KL) are acceptable if tolerance and temperature coefficient specifications are met.

Q: Does tighter tolerance affect component cost or availability? A: Tighter tolerance specifications typically result in higher component cost. Availability is determined by inventory levels at the time of procurement. Refer to current inventory data for specific part availability.

Q: Can I use a part with ±0.1% tolerance in place of ±0.5%? A: Yes. A tighter tolerance specification is a performance upgrade and is compatible with any application designed for the original ±0.5% tolerance. The component will perform within the original specification range.

Q: What is the significance of the 0603 package designation? A: 0603 (1608 Metric) is the standardized package size for all listed parts. This ensures mechanical compatibility with PCB footprints designed for the MCT06030D3602DP500. Parts with different package designations are not substitutable.

Q: Are there differences in physical dimensions between substitute parts? A: All parts use the 0603 (1608 Metric) package with maximum seated height of 0.022" (0.55mm), except RG1608P-363-B-T5 which has a maximum seated height of 0.020" (0.50mm). These minor variations do not affect PCB assembly compatibility.