MCT06030C1002DP500 Equivalent & Substitute Parts

Part Overview

The MCT06030C1002DP500 is a 10 kOhms ±0.5% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by Vishay Beyschlag/Draloric/BC Components, this component is part of the MCT Professional series and is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1). The part is currently active in production with 706 units in stock.

Equivalent and substitute parts are necessary when original inventory is depleted, when design requirements demand improved performance characteristics such as tighter tolerance or lower temperature coefficient, or when alternative manufacturers' components offer superior availability or cost optimization while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	10 kOhms
Tolerance	±0.5%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thin Film
Temperature Coefficient	±50ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Features	Anti-Sulfur
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the MCT06030C1002DP500 is determined by the following mandatory parameters:

Electrical Compatibility Requirements:

Resistance value: 10 kOhms (exact match required)
Tolerance: ±0.5% or tighter (±0.1%, ±0.05% acceptable as upgrades)
Power rating: 0.1W minimum (1/6W acceptable as upgrade)
Composition: Thin film technology

Mechanical Compatibility Requirements:

Package: 0603 (1608 Metric) form factor
Terminations: 2-terminal configuration
Physical dimensions: 0.061" L x 0.033" W maximum (1.55mm x 0.85mm)
Height seated maximum: 0.022" (0.55mm)

Environmental & Compliance Requirements:

Operating temperature range: -55°C minimum to 155°C maximum
RoHS3 compliance mandatory
MSL rating: 1 (Unlimited) acceptable

Substitute parts are grouped into three categories: Upgrade variants (improved tolerance or temperature coefficient from same manufacturer), Direct equivalents (alternative manufacturers with matching specifications), and Cross-compatible alternatives (different manufacturers meeting all electrical and mechanical parameters).

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Temp Range (°C)	Package	Features	Inventory
MCT06030C1002DP500	Vishay	10 kΩ	±0.5%	0.1	±50	-55 ~ 155	0603	Anti-Sulfur	706
MCT06030D1002BP100	Vishay	10 kΩ	±0.1%	0.1	±25	-55 ~ 125	0603	Anti-Sulfur	10906
MCT06030D1002BP500	Vishay	10 kΩ	±0.1%	0.1	±25	-55 ~ 125	0603	Anti-Sulfur	15957
MCT06030D1002DP500	Vishay	10 kΩ	±0.5%	0.1	±25	-55 ~ 155	0603	Anti-Sulfur	1630
MCT06030E1002BP100	Vishay	10 kΩ	±0.1%	0.1	±15	-55 ~ 125	0603	Anti-Sulfur	2514
MCT06030F1002BP100	Vishay	10 kΩ	±0.1%	0.1	±10	-55 ~ 125	0603	Anti-Sulfur	1573
RP73PF1J10KBTDF	TE Connectivity	10 kΩ	±0.1%	0.167	±25	-55 ~ 155	0603	—	62480
RT0603DRE0710KL	YAGEO	10 kΩ	±0.5%	0.1	±50	-55 ~ 155	0603	—	1265
ERA-3APB103V	Panasonic	10 kΩ	±0.1%	0.1	±15	-55 ~ 155	0603	AEC-Q200	43523
ERA-3ARB103V	Panasonic	10 kΩ	±0.1%	0.1	±10	-55 ~ 155	0603	AEC-Q200	38636
ERA-3ARW103V	Panasonic	10 kΩ	±0.05%	0.1	±10	-55 ~ 155	0603	AEC-Q200	22578

Engineering Selection Recommendations

Vishay MCT Series Upgrades (Same Manufacturer): MCT06030D1002DP500 provides identical tolerance (±0.5%) and full temperature range (-55°C ~ 155°C) with improved temperature coefficient (±25ppm/°C vs ±50ppm/°C). This represents a direct performance upgrade within the same product family while maintaining anti-sulfur protection and ROHS3 compliance. Selection is appropriate when improved stability is required without changing supplier.

MCT06030D1002BP100, MCT06030E1002BP100, and MCT06030F1002BP100 offer progressively tighter tolerances (±0.1%) and lower temperature coefficients (±25ppm/°C, ±15ppm/°C, ±10ppm/°C respectively). These are precision-grade alternatives suitable for applications requiring enhanced accuracy. Operating temperature range is reduced to -55°C ~ 125°C; verify compatibility with system thermal requirements.

TE Connectivity RP73PF1J10KBTDF: This part matches electrical specifications (10 kΩ, ±0.1%, thin film) and extends operating temperature to 155°C. Power rating is upgraded to 0.167W (1/6W). ROHS3 compliant with MSL 1. High inventory availability (62,480 units) supports supply chain continuity. Suitable for applications where higher power dissipation margin is beneficial.

YAGEO RT0603DRE0710KL: Direct electrical equivalent with matching tolerance (±0.5%), power rating (0.1W), and temperature coefficient (±50ppm/°C). Full temperature range (-55°C ~ 155°C) supported. ROHS3 compliant. Represents alternative sourcing from established manufacturer with adequate inventory (1,265 units).

Panasonic ERA-3A Series (AEC-Q200 Automotive Grade): ERA-3APB103V, ERA-3ARB103V, and ERA-3ARW103V are automotive-qualified alternatives meeting AEC-Q200 standard. All support full temperature range (-55°C ~ 155°C) and ROHS3 compliance. Tolerance options range from ±0.1% to ±0.05% with temperature coefficients from ±15ppm/°C to ±10ppm/°C. Selection is appropriate for automotive applications or when automotive-grade reliability is specified. Inventory levels are substantial (22,578 to 43,523 units).

Frequently Asked Questions (FAQ)

Q: Can MCT06030C1002DP500 be replaced with MCT06030D1002BP100?

A: MCT06030D1002BP100 is electrically compatible for direct substitution in most applications. Both are 10 kΩ ±0.5% thin film resistors in 0603 package with 0.1W power rating. However, MCT06030D1002BP100 has a reduced operating temperature range (-55°C ~ 125°C vs -55°C ~ 155°C). Verify that your application does not require operation above 125°C. The improved temperature coefficient (±25ppm/°C) is a performance upgrade.

Q: What is the difference between Vishay MCT and Panasonic ERA-3A series?

A: Both are thin film 0603 resistors with 10 kΩ resistance and 0.1W power rating. Panasonic ERA-3A parts carry AEC-Q200 automotive qualification, making them suitable for automotive applications. Panasonic parts support the full -55°C ~ 155°C temperature range. Vishay MCT parts feature anti-sulfur protection. Selection depends on application requirements: choose Panasonic for automotive; choose Vishay for anti-sulfur environments or when anti-sulfur protection is specified.

Q: Is TE Connectivity RP73PF1J10KBTDF a suitable replacement?

A: Yes, RP73PF1J10KBTDF is electrically and mechanically compatible. It matches the 10 kΩ resistance, 0603 package, and supports the full -55°C ~ 155°C temperature range. The upgraded power rating (0.167W vs 0.1W) provides additional thermal margin. Temperature coefficient is ±25ppm/°C. This part is suitable for direct substitution and offers superior inventory availability (62,480 units).

Q: Can I use a resistor with tighter tolerance than ±0.5%?

A: Yes. Tighter tolerance resistors (±0.1%, ±0.05%) are direct substitutes and provide improved accuracy. They are backward-compatible with designs specified for ±0.5%. However, verify that your circuit design does not depend on the specific tolerance band of the original part. Tighter tolerance parts typically cost more and may have different temperature coefficients.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive industry standard for passive components. It certifies that the component meets automotive reliability, quality, and environmental stress testing requirements. Panasonic ERA-3A series parts with AEC-Q200 rating are suitable for automotive applications and applications requiring automotive-grade reliability. Non-automotive applications do not require AEC-Q200 qualification.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All parts listed in this reference are ROHS3 compliant and have MSL rating of 1 (Unlimited). They meet environmental and regulatory requirements equivalent to the original MCT06030C1002DP500.

Q: What is the impact of different temperature coefficients?

A: Temperature coefficient indicates how much the resistance value changes with temperature. MCT06030C1002DP500 has ±50ppm/°C; upgraded Vishay parts have ±25ppm/°C; premium parts have ±15ppm/°C or ±10ppm/°C. Lower temperature coefficient means more stable resistance across temperature variations. Select based on circuit accuracy requirements. For general-purpose applications, ±50ppm/°C is acceptable; for precision circuits, select ±25ppm/°C or lower.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message