MCS0402UD1002BE000 Equivalent & Substitute Parts

Part Overview

The MCS0402UD1002BE000 is a 10 kOhms ±0.1% precision thin film chip resistor in 0402 (1005 Metric) package manufactured by Vishay Beyschlag/Draloric/BC Components. This component is rated for automotive applications under AEC-Q200 standard with anti-sulfur and moisture-resistant properties. The part is currently active in production with 989 pieces available in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring 10 kOhms ±0.1% precision resistors in 0402 package format.

Substiute Parts

MCS0402UD1002BE000

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1098MCS0402UD1002BE000 Datasheet

Current PartRFQ

ERA-2VEB1002X

Panasonic Electronic ComponentsIn Stock: 29720ERA-2VEB1002X Datasheet

DirectRFQ

MCS0402MD1002BE100

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 16443MCS0402MD1002BE100 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MCS0402UD1002BE000 are qualified based on the following critical parameters that determine functional interchangeability:

Mandatory Matching Parameters:

• Resistance value: 10 kOhms
• Tolerance: ±0.1%
• Package / Case: 0402 (1005 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Automotive Rating: AEC-Q200
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power Rating: Substitute parts may have equal or higher power rating than the main part (0.063W minimum)
• Packaging Format: Substitutes may differ in tape format (Tape & Reel vs. Cut Tape & Digi-Reel®) without affecting electrical performance
• Physical Dimensions: Height variation within standard 0402 package specifications is acceptable

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts meet the electrical and mechanical requirements for direct replacement of the MCS0402UD1002BE000 in applications requiring 10 kOhms ±0.1% precision resistors.

ERA-2VEB1002X (Panasonic Electronic Components): This substitute offers higher power rating (0.1W vs. 0.063W), providing additional thermal margin in power-dissipation-sensitive applications. All electrical parameters, temperature characteristics, and automotive compliance ratings are equivalent. The part is active in production with 29,690 pieces in stock. Packaging format differs (Cut Tape & Digi-Reel® vs. Tape & Reel), which may affect assembly line compatibility depending on pick-and-place equipment configuration.

MCS0402MD1002BE100 (Vishay Beyschlag/Draloric/BC Components): This substitute maintains identical power rating (0.063W) and composition as the main part, with equivalent electrical performance and automotive compliance. Manufacturer consistency with the main part may simplify supply chain management. The part is active in production with 16,371 pieces in stock. Packaging format differs (Cut Tape & Digi-Reel® vs. Tape & Reel).

Both substitutes are ROHS3 compliant, AEC-Q200 rated, and maintain the required ±25ppm/°C temperature coefficient and -55°C ~ 155°C operating range. Selection between substitutes should be based on packaging format compatibility with assembly equipment and inventory availability requirements.

Frequently Asked Questions (FAQ)

Q: Can ERA-2VEB1002X replace MCS0402UD1002BE000 in all applications?

A: Yes. The ERA-2VEB1002X meets all electrical specifications including 10 kOhms resistance, ±0.1% tolerance, ±25ppm/°C temperature coefficient, and -55°C ~ 155°C operating range. The higher power rating (0.1W vs. 0.063W) is compatible with applications designed for the lower-rated part. Packaging format (Cut Tape & Digi-Reel® vs. Tape & Reel) must be compatible with assembly equipment.

Q: What is the difference between MCS0402MD1002BE100 and MCS0402UD1002BE000?

A: Both parts are manufactured by Vishay Beyschlag/Draloric/BC Components with identical electrical specifications (10 kOhms ±0.1%, 0.063W, ±25ppm/°C). The primary difference is packaging format: MCS0402UD1002BE000 is supplied in Tape & Reel (TR) format, while MCS0402MD1002BE100 is supplied in Cut Tape (CT) & Digi-Reel® format. Electrical performance and automotive compliance are equivalent.

Q: Are all three parts AEC-Q200 rated?

A: Yes. MCS0402UD1002BE000, ERA-2VEB1002X, and MCS0402MD1002BE100 are all AEC-Q200 qualified for automotive applications.

Q: What does the ±0.1% tolerance mean for these resistors?

A: The ±0.1% tolerance indicates that the actual resistance value will be within 0.1% of the nominal 10 kOhms value. This is a precision-grade tolerance suitable for applications requiring high accuracy. All three parts meet this specification.

Q: Can I use these resistors in high-temperature applications?

A: Yes. All three parts are rated for operating temperatures from -55°C to 155°C with a temperature coefficient of ±25ppm/°C, making them suitable for automotive and industrial high-temperature environments.

Q: What is the difference in power rating between the parts?

A: MCS0402UD1002BE000 and MCS0402MD1002BE100 are rated at 0.063W (1/16W), while ERA-2VEB1002X is rated at 0.1W (1/10W). The higher power rating of the ERA-2VEB1002X provides additional thermal dissipation capability. Parts with higher power ratings can be used in applications designed for lower-rated parts without performance degradation.

Q: Are these parts RoHS compliant?

A: Yes. All three parts are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory requirements for electronic components.