MCS04020C8062FE000 Equivalent & Substitute Parts

Part Overview

The MCS04020C8062FE000 is an 80.6 kOhms ±1% thin film chip resistor in 0402 (1005 Metric) package rated at 0.063W (1/16W). Manufactured by Vishay Beyschlag/Draloric/BC Components, this component is part of the MCS Professional series and maintains Active product status. Substitute parts are necessary when the original part experiences supply constraints, when tighter tolerance specifications are required for precision applications, or when automotive-grade certifications are mandated by design requirements.

Substiute Parts

MCS04020C8062FE000

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1188MCS04020C8062FE000 Datasheet

Current PartRFQ

CPF0402B80K6E1

TE Connectivity Passive ProductIn Stock: 28537CPF0402B80K6E1 Datasheet

UpgradeRFQ

RG1005P-8062-B-T5

SusumuIn Stock: 86318RG1005P-8062-B-T5 Datasheet

UpgradeRFQ

RT0402BRD0780K6L

YAGEOIn Stock: 18431RT0402BRD0780K6L Datasheet

UpgradeRFQ

RT0402DRE0780K6L

YAGEOIn Stock: 2004RT0402DRE0780K6L Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MCS04020C8062FE000 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 80.6 kOhms (exact match required)
• Package type: 0402 (1005 Metric)
• Power rating: 0.063W (1/16W)
• Composition: Thin Film
• Operating temperature range: -55°C to 155°C minimum
• RoHS3 compliance

Allowable Variation Parameters:

• Tolerance: Can be equal to or tighter than ±1% (±0.5% or ±0.1% acceptable)
• Temperature coefficient: Can be equal to or lower than ±50ppm/°C
• Moisture sensitivity level: MSL 1 maintained across all substitutes
• Additional certifications (AEC-Q200, Anti-Sulfur features) do not disqualify substitution

All four substitute parts meet these criteria and are electrically and mechanically compatible with the original MCS04020C8062FE000.

Parameter Comparison

Engineering Selection Recommendations

CPF0402B80K6E1 (TE Connectivity Passive Product) Select this substitute when improved tolerance performance is required. The ±0.1% tolerance and ±25ppm/°C temperature coefficient provide enhanced precision over the original ±1% specification. ROHS3 compliance and MSL 1 rating maintain full compatibility with existing supply chain requirements.

RG1005P-8062-B-T5 (Susumi) This substitute is the optimal choice for automotive applications. The AEC-Q200 automotive qualification, combined with ±0.1% tolerance and ±25ppm/°C temperature coefficient, satisfies stringent automotive design standards. Anti-Sulfur construction and ROHS3 compliance ensure long-term reliability in harsh environments.

RT0402BRD0780K6L (YAGEO) Select this substitute for applications requiring tighter tolerance specifications without automotive certification. The ±0.1% tolerance and ±25ppm/°C temperature coefficient exceed the original part's precision. ROHS3 compliance and MSL 1 rating provide full compatibility.

RT0402DRE0780K6L (YAGEO) This substitute maintains tolerance and temperature coefficient specifications closest to the original MCS04020C8062FE000, with ±0.5% tolerance and ±50ppm/°C temperature coefficient. Use this part when direct performance equivalence is prioritized. ROHS3 compliance and MSL 1 rating ensure compatibility.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with ±0.1% tolerance in place of the ±1% original? A: Yes. Tighter tolerance specifications are electrically and mechanically compatible. The ±0.1% tolerance substitute will perform within the original design requirements while providing improved precision.

Q: Are all substitute parts suitable for automotive applications? A: Only RG1005P-8062-B-T5 carries AEC-Q200 automotive qualification. Other substitutes are suitable for general industrial and consumer applications but lack automotive certification.

Q: Does the 0402 package dimension remain identical across all parts? A: Yes. All parts use the 0402 (1005 Metric) package with identical footprint dimensions (0.039" L x 0.020" W / 1.00mm x 0.50mm). Height variations are minimal (0.014" to 0.016" seated height) and do not affect PCB assembly compatibility.

Q: What is the significance of the temperature coefficient difference? A: The original part has ±50ppm/°C; three substitutes offer ±25ppm/°C. Lower temperature coefficients indicate better resistance stability across temperature extremes, beneficial for precision analog circuits. One substitute (RT0402DRE0780K6L) matches the original ±50ppm/°C specification.

Q: Are all substitutes ROHS3 compliant? A: Yes. All substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with modern manufacturing and environmental standards.

Q: Can I mix original and substitute parts in the same production run? A: Yes. All parts are electrically and mechanically equivalent within the specified parameters. However, design documentation should reflect the approved substitute part numbers for traceability.