MCS04020C3320FE000 Equivalent & Substitute Parts

Part Overview

The MCS04020C3320FE000 is a 332 Ohm ±1% thin film chip resistor in 0402 (1005 Metric) package rated at 0.063W (1/16W) with anti-sulfur coating. Manufactured by Vishay Beyschlag/Draloric/BC Components, this component is active and widely used in precision analog circuits. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical compatibility, and environmental ratings to ensure direct board-level interchangeability.

Key Parameters

Parameter	Value
Resistance	332 Ohms
Tolerance	±1%
Power Rating	0.063W (1/16W)
Package	0402 (1005 Metric)
Composition	Thin Film
Temperature Coefficient	±50ppm/°C
Operating Temperature Range	-55°C to 155°C
Dimensions	0.039" L x 0.020" W (1.00mm x 0.50mm)
Height (Seated Max)	0.015" (0.37mm)
Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts are classified into two categories based on tolerance and performance characteristics:

Direct Equivalents (±1% Tolerance): Parts matching the original ±1% tolerance specification with identical electrical performance.

Upgrade Options (≤0.5% Tolerance): Parts with tighter tolerance specifications (±0.1% or ±0.5%) offering improved precision while maintaining full mechanical and thermal compatibility. These parts are electrically superior and can replace the original in applications where tighter tolerance is beneficial or required.

Substitution is valid when the following parameters are matched or exceeded:

Resistance value: 332 Ohms
Package: 0402 (1005 Metric)
Power rating: ≥0.063W
Composition: Thin Film
Operating temperature range: -55°C to 155°C minimum
Termination count: 2
RoHS3 compliance

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Op Temp Range (°C)	Height Max (mm)	RoHS Status
MCS04020C3320FE000	Vishay Beyschlag/Draloric/BC Components	332 Ω	±1%	0.063	±50	-55 to 155	0.37	ROHS3
RT0402FRE07332RL	YAGEO	332 Ω	±1%	0.063	±50	-55 to 155	0.35	ROHS3
CPF0402B332RE1	TE Connectivity Passive Product	332 Ω	±0.1%	0.063	±25	-55 to 155	0.35	ROHS3
RG1005P-3320-D-T10	Susumu	332 Ω	±0.5%	0.063	±25	-55 to 155	0.40	ROHS3
RN73C1E332RBTDF	TE Connectivity Passive Product	332 Ω	±0.1%	0.063	±10	-55 to 155	0.35	ROHS3
RR0510P-3320-D	Susumu	332 Ω	±0.5%	0.063	±25	-55 to 125	0.40	ROHS3
RT0402BRD07332RL	YAGEO	332 Ω	±0.1%	0.063	±25	-55 to 155	0.35	ROHS3

Engineering Selection Recommendations

RT0402FRE07332RL (YAGEO): Direct equivalent with matching ±1% tolerance and ±50ppm/°C temperature coefficient. Suitable for applications requiring identical performance specifications to the original MCS04020C3320FE000.

CPF0402B332RE1 (TE Connectivity): Upgrade option with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Recommended for precision analog circuits where tighter tolerance improves circuit performance. ROHS3 compliant with full temperature range support.

RG1005P-3320-D-T10 (Susumu): Upgrade option with ±0.5% tolerance, ±25ppm/°C temperature coefficient, and AEC-Q200 automotive qualification. Suitable for applications requiring automotive-grade reliability and anti-sulfur coating.

RN73C1E332RBTDF (TE Connectivity): Upgrade option with ±0.1% tolerance and superior ±10ppm/°C temperature coefficient. Recommended for high-precision applications requiring minimal temperature drift.

RR0510P-3320-D (Susumu): Upgrade option with ±0.5% tolerance and ±25ppm/°C temperature coefficient. Operating temperature range limited to -55°C to 125°C; suitable for applications not requiring the full 155°C upper limit.

RT0402BRD07332RL (YAGEO): Upgrade option with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Recommended for precision applications requiring tighter tolerance than the original specification.

All substitute parts maintain ROHS3 compliance, MSL Level 1 rating, and 0402 package compatibility.

Frequently Asked Questions (FAQ)

Q: Can RT0402FRE07332RL replace MCS04020C3320FE000 directly? A: Yes. RT0402FRE07332RL is a direct equivalent with matching ±1% tolerance, ±50ppm/°C temperature coefficient, and identical 0402 package dimensions. No circuit modifications are required.

Q: What is the difference between the original part and upgrade options? A: Upgrade options (CPF0402B332RE1, RN73C1E332RBTDF, RG1005P-3320-D-T10, RT0402BRD07332RL) feature tighter tolerance specifications (±0.1% or ±0.5%) and lower temperature coefficients (±10ppm/°C to ±25ppm/°C) compared to the original ±1% tolerance and ±50ppm/°C. These provide improved precision and stability in analog circuits.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant and suitable for applications requiring environmental compliance.

Q: What is the maximum height difference among substitute parts? A: The original MCS04020C3320FE000 has a maximum seated height of 0.37mm. Most substitutes are 0.35mm, and RG1005P-3320-D-T10 and RR0510P-3320-D are 0.40mm. All remain within typical PCB assembly tolerances for 0402 packages.

Q: Can RR0510P-3320-D be used in applications requiring 155°C operation? A: No. RR0510P-3320-D has an operating temperature range of -55°C to 125°C. For applications requiring operation to 155°C, use RT0402FRE07332RL, CPF0402B332RE1, RG1005P-3320-D-T10, RN73C1E332RBTDF, or RT0402BRD07332RL.

Q: Which substitute offers the best temperature stability? A: RN73C1E332RBTDF offers the lowest temperature coefficient at ±10ppm/°C, providing superior temperature stability compared to all other options.

Q: Is AEC-Q200 qualification required for my application? A: AEC-Q200 qualification is specific to automotive applications. RG1005P-3320-D-T10 carries this certification. For non-automotive applications, other substitutes without automotive qualification are suitable.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message