MCS04020C1962FE000 Equivalent & Substitute Parts

Part Overview

The MCS04020C1962FE000 is a 19.6 kOhms ±1% thin film chip resistor in 0402 (1005 Metric) package rated at 0.063W (1/16W) with anti-sulfur coating. Manufactured by Vishay Beyschlag/Draloric/BC Components, this component is active and RoHS3 compliant. Substitute parts are necessary to address supply availability, performance upgrades, or specific manufacturing requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

MCS04020C1962FE000

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 772MCS04020C1962FE000 Datasheet

Current PartRFQ

RT0402FRE0719K6L

YAGEOIn Stock: 11084RT0402FRE0719K6L Datasheet

DirectRFQ

CPF0402B19K6E1

TE Connectivity Passive ProductIn Stock: 1855CPF0402B19K6E1 Datasheet

UpgradeRFQ

RT0402BRD0719K6L

YAGEOIn Stock: 14870RT0402BRD0719K6L Datasheet

UpgradeRFQ

RT0402DRE0719K6L

YAGEOIn Stock: 24988RT0402DRE0719K6L Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following mandatory parameters:

• Resistance value: 19.6 kOhms (exact match required)
• Package: 0402 (1005 Metric) (exact match required)
• Power rating: 0.063W minimum (1/16W)
• Composition: Thin film
• Operating temperature range: -55°C to 155°C minimum
• Moisture sensitivity: MSL 1 or better
• RoHS3 compliance

Tolerance and temperature coefficient may vary within acceptable ranges for equivalent substitution. Tighter tolerance specifications (±0.5%, ±0.1%) represent performance upgrades and are fully compatible with the original specification.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are direct functional equivalents to the MCS04020C1962FE000 and maintain full compatibility across electrical, mechanical, and regulatory specifications.

RT0402FRE0719K6L (YAGEO) provides direct equivalence with identical tolerance (±1%) and temperature coefficient (±50ppm/°C). This part is suitable for direct replacement in applications where the original specification is maintained.

RT0402BRD0719K6L and CPF0402B19K6E1 offer performance upgrades with tighter tolerance (±0.1%) and improved temperature coefficient (±25ppm/°C). These parts are suitable for applications requiring enhanced precision and stability.

RT0402DRE0719K6L provides an intermediate option with ±0.5% tolerance while maintaining the original temperature coefficient (±50ppm/°C).

All substitute parts are active products with RoHS3 compliance and MSL 1 rating, ensuring regulatory compliance and handling compatibility with the original component.

Frequently Asked Questions (FAQ)

Q: Can RT0402FRE0719K6L be used as a direct replacement for MCS04020C1962FE000?

A: Yes. Both parts share identical resistance (19.6 kOhms), tolerance (±1%), power rating (0.063W), package (0402), composition (thin film), temperature coefficient (±50ppm/°C), and operating temperature range (-55°C to 155°C). The parts are electrically and mechanically interchangeable.

Q: What is the difference between the YAGEO upgrade options?

A: RT0402BRD0719K6L offers ±0.1% tolerance with ±25ppm/°C temperature coefficient. RT0402DRE0719K6L offers ±0.5% tolerance with ±50ppm/°C temperature coefficient. Both maintain full compatibility with the original specification while providing different precision levels.

Q: Are the substitute parts compatible with the original PCB layout?

A: Yes. All substitute parts use the 0402 (1005 Metric) package with identical footprint dimensions (0.039" L x 0.020" W). Maximum seated heights range from 0.014" to 0.015", which is within standard PCB assembly tolerances.

Q: Do all substitute parts meet the same compliance requirements?

A: Yes. All listed substitute parts are RoHS3 compliant, carry MSL 1 rating (unlimited moisture sensitivity), and are active products with full regulatory compliance matching the original MCS04020C1962FE000.

Q: Which substitute part should be selected for precision-critical applications?

A: RT0402BRD0719K6L (YAGEO) or CPF0402B19K6E1 (TE Connectivity) are recommended for precision applications, as both offer ±0.1% tolerance and ±25ppm/°C temperature coefficient, providing superior stability compared to the original ±1% tolerance specification.