MCS04020C1690FE000 Equivalent & Substitute Parts

Part Overview

The MCS04020C1690FE000 is a 169 Ohm ±1% thin film chip resistor in 0402 (1005 Metric) package rated at 0.063W (1/16W) with anti-sulfur coating. Manufactured by Vishay Beyschlag/Draloric/BC Components, this component is active and RoHS3 compliant. Substitute parts are identified for applications requiring improved tolerance specifications, enhanced temperature stability, or alternative supplier sourcing while maintaining identical electrical and mechanical compatibility.

Substiute Parts

MCS04020C1690FE000

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1134MCS04020C1690FE000 Datasheet

Current PartRFQ

CPF0402B169RE1

TE Connectivity Passive ProductIn Stock: 4198CPF0402B169RE1 Datasheet

UpgradeRFQ

RN73C1E169RBTDF

TE Connectivity Passive ProductIn Stock: 851RN73C1E169RBTDF Datasheet

UpgradeRFQ

RT0402BRD07169RL

YAGEOIn Stock: 10938RT0402BRD07169RL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MCS04020C1690FE000 is determined by strict equivalence in the following parameters:

• Resistance value: 169 Ohms (exact match required)
• Package: 0402 (1005 Metric) form factor
• Power rating: 0.063W minimum
• Composition: Thin film construction
• Operating temperature range: -55°C to 155°C minimum
• Termination count: 2 terminations
• RoHS3 compliance and MSL 1 rating

All identified substitute parts meet these core requirements. Tolerance and temperature coefficient specifications may be improved in substitute options without affecting functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain active product status and full RoHS3 compliance, ensuring regulatory and supply chain continuity. Selection between alternatives depends on application-specific requirements:

CPF0402B169RE1 (TE Connectivity) offers improved tolerance at ±0.1% with moderate temperature coefficient of ±25ppm/°C, suitable for general precision applications requiring better initial accuracy than the original specification.

RN73C1E169RBTDF (TE Connectivity) provides the tightest temperature coefficient at ±10ppm/°C combined with ±0.1% tolerance, appropriate for temperature-sensitive circuits or applications with extended operating ranges.

RT0402BRD07169RL (YAGEO) delivers ±0.1% tolerance with ±25ppm/°C temperature coefficient, offering a balance of precision and thermal stability with the highest inventory availability.

All substitute parts feature reduced maximum height (0.014" vs. 0.015"), which may provide marginal benefits in space-constrained PCB layouts while maintaining full mechanical compatibility with 0402 footprints.

Frequently Asked Questions (FAQ)

Q: Can MCS04020C1690FE000 be directly replaced with any of these substitute parts?

A: Yes. All substitute parts are electrically and mechanically equivalent within the 0402 package footprint. They share identical resistance value, power rating, operating temperature range, and compliance certifications. Direct PCB substitution is supported without design modification.

Q: What is the primary difference between the main part and substitutes?

A: The main part specifies ±1% tolerance, while all substitutes offer improved ±0.1% tolerance. Additionally, substitute parts feature lower temperature coefficients (±10ppm/°C to ±25ppm/°C versus ±50ppm/°C), resulting in better stability across the operating temperature range.

Q: Are there any height compatibility concerns?

A: Substitute parts are slightly shorter (0.014" maximum versus 0.015" maximum). This reduction is within standard PCB assembly tolerances and does not affect footprint compatibility or solder joint reliability.

Q: Which substitute should be selected for precision analog circuits?

A: RN73C1E169RBTDF is recommended for precision applications due to its ±10ppm/°C temperature coefficient combined with ±0.1% tolerance, providing superior long-term stability and accuracy.

Q: Are all parts RoHS3 compliant?

A: Yes. The main part and all substitute parts are RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, meeting current environmental and reliability standards.

Q: What is the basis for substitution compatibility?

A: Substitution is based on matching resistance value (169 Ohms), package type (0402), power rating (0.063W), composition (thin film), operating temperature range (-55°C to 155°C), and compliance certifications. Tolerance and temperature coefficient improvements do not affect functional compatibility.