MCS04020C1302FE000 Equivalent & Substitute Parts

Part Overview

The MCS04020C1302FE000 is a 13 kOhm ±1% thin film chip resistor in 0402 (1005 Metric) package rated at 0.063W (1/16W) with anti-sulfur coating. Manufactured by Vishay Beyschlag/Draloric/BC Components, this component is active and widely used in precision analog circuits, signal conditioning, and general-purpose resistive networks. Substitute parts are necessary to address supply chain availability, lead time requirements, or application-specific performance upgrades while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	13 kOhms
Tolerance	±1%
Power Rating	0.063W (1/16W)
Package	0402 (1005 Metric)
Composition	Thin Film
Temperature Coefficient	±50ppm/°C
Operating Temperature Range	-55°C to 155°C
Features	Anti-Sulfur
RoHS Status	ROHS3 Compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following mandatory parameters:

Resistance Value: Must be 13 kOhms
Package: Must be 0402 (1005 Metric)
Power Rating: Must be 0.063W (1/16W) minimum
Composition: Must be Thin Film
Operating Temperature Range: Must support -55°C to 155°C (or equivalent)
Compliance: Must be ROHS3 Compliant and REACH Unaffected

Substitute parts are grouped into two categories:

Direct Equivalents (±1% tolerance, ±50ppm/°C): Parts with identical tolerance and temperature coefficient specifications, suitable for direct replacement without circuit re-evaluation.

Upgraded Alternatives (±0.1% or ±0.5% tolerance, ±25ppm/°C): Parts with tighter tolerance or improved temperature stability, suitable for applications requiring enhanced precision or thermal performance.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Op Temp Range (°C)	Height Max (mm)	Features
MCS04020C1302FE000	Vishay Beyschlag	13 kOhm	±1%	0.063	±50	-55 to 155	0.37	Anti-Sulfur
RT0402FRE0713KL	YAGEO	13 kOhm	±1%	0.063	±50	-55 to 155	0.35	—
CPF0402B13KE1	TE Connectivity	13 kOhm	±0.1%	0.063	±25	-55 to 155	0.35	—
RG1005P-133-B-T5	Susumu	13 kOhm	±0.1%	0.063	±25	-55 to 155	0.40	Anti-Sulfur, AEC-Q200
RR0510P-133-D	Susumu	13 kOhm	±0.5%	0.063	±25	-55 to 125	0.40	—
RT0402BRD0713KL	YAGEO	13 kOhm	±0.1%	0.063	±25	-55 to 155	0.35	—
RT0402DRD0713KL	YAGEO	13 kOhm	±0.5%	0.063	±25	-55 to 155	0.35	—
RT0402DRE0713KL	YAGEO	13 kOhm	±0.5%	0.063	±50	-55 to 155	0.35	—

Engineering Selection Recommendations

For Direct Replacement (No Circuit Re-evaluation Required):

RT0402FRE0713KL (YAGEO) is the primary direct equivalent, matching all electrical specifications of the MCS04020C1302FE000 with identical tolerance (±1%) and temperature coefficient (±50ppm/°C). Both components are ROHS3 compliant and MSL 1 rated.

For Precision Applications (Tighter Tolerance Required):

CPF0402B13KE1 (TE Connectivity) and RT0402BRD0713KL (YAGEO) provide ±0.1% tolerance with ±25ppm/°C temperature coefficient, suitable for applications requiring enhanced accuracy. Both maintain full -55°C to 155°C operating range and ROHS3 compliance.

For Automotive or Harsh Environment Applications:

RG1005P-133-B-T5 (Susumu) combines ±0.1% tolerance with AEC-Q200 automotive qualification and anti-sulfur coating, matching the environmental protection features of the original part. Operating range is -55°C to 155°C.

For Cost-Optimized Alternatives:

RT0402DRD0713KL and RT0402DRE0713KL (YAGEO) offer ±0.5% tolerance with reduced temperature coefficient sensitivity (±25ppm/°C or ±50ppm/°C respectively), suitable for general-purpose applications where tighter tolerance is not required.

RR0510P-133-D (Susumu) provides ±0.5% tolerance with high inventory availability. Note: Operating temperature range is -55°C to 125°C, which is 30°C lower than the original specification.

Frequently Asked Questions (FAQ)

Q: Can RT0402FRE0713KL be used as a direct drop-in replacement for MCS04020C1302FE000?

A: Yes. RT0402FRE0713KL matches the electrical specifications (13 kOhm, ±1%, ±50ppm/°C) and package (0402), with identical operating temperature range (-55°C to 155°C). No circuit re-evaluation is required.

Q: What is the difference between ±1% and ±0.1% tolerance parts?

A: Tolerance defines the maximum deviation from the nominal resistance value. ±1% tolerance allows ±130 ohms deviation from 13 kOhms; ±0.1% tolerance allows ±13 ohms deviation. Tighter tolerance parts are suitable for precision analog circuits, instrumentation, and signal conditioning applications.

Q: Why do some substitute parts have ±25ppm/°C instead of ±50ppm/°C?

A: Temperature coefficient specifies resistance change per degree Celsius. ±25ppm/°C represents improved thermal stability compared to ±50ppm/°C. This is beneficial in applications with wide operating temperature ranges or where temperature-induced drift must be minimized.

Q: Is RR0510P-133-D compatible with applications requiring -55°C to 155°C operation?

A: No. RR0510P-133-D has a maximum operating temperature of 125°C, which is 30°C below the original specification. Use this part only in applications with maximum operating temperature of 125°C or lower.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive industry standard for passive components. RG1005P-133-B-T5 meets this qualification, making it suitable for automotive and harsh environment applications requiring enhanced reliability and quality assurance.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and REACH unaffected, matching the environmental compliance of the original MCS04020C1302FE000.

Q: Can I use a ±0.5% tolerance part in place of a ±1% part?

A: Yes, from a tolerance perspective. ±0.5% tolerance is tighter than ±1%, so it will meet any circuit requirement specified for ±1%. However, verify that other parameters (temperature coefficient, operating temperature range) match your application requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message