MCR18EZPJ113 Equivalent & Substitute Parts

Part Overview

The MCR18EZPJ113 is a 1206 package thick film chip resistor rated at 11 kOhms ±5% with 0.25W power handling. Manufactured by Rohm Semiconductor, this component is AEC-Q200 automotive qualified and designed for applications requiring automotive-grade reliability across the -55°C to 155°C operating range. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent alternatives that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Substiute Parts

MCR18EZPJ113

Rohm SemiconductorIn Stock: 757MCR18EZPJ113 Datasheet

Current PartRFQ

CRCW120611K0JNEA

Vishay DaleIn Stock: 15808CRCW120611K0JNEA Datasheet

DirectRFQ

ERJ-8GEYJ113V

Panasonic Electronic ComponentsIn Stock: 105443ERJ-8GEYJ113V Datasheet

DirectRFQ

RMCF1206JT11K0

Stackpole Electronics IncIn Stock: 6363RMCF1206JT11K0 Datasheet

DirectRFQ

CRCW120611K0FKEA

Vishay DaleIn Stock: 6174CRCW120611K0FKEA Datasheet

UpgradeRFQ

ERJ-P08J113V

Panasonic Electronic ComponentsIn Stock: 19821ERJ-P08J113V Datasheet

UpgradeRFQ

CR1206-JW-113ELF

Bourns Inc.In Stock: 15760CR1206-JW-113ELF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MCR18EZPJ113 are classified based on electrical and mechanical parameter alignment:

Direct Equivalents maintain identical specifications: 11 kOhms resistance, ±5% tolerance, 0.25W power rating, 1206 package, ±200ppm/°C temperature coefficient, and AEC-Q200 automotive qualification. These parts are interchangeable without circuit redesign.

Upgrade Options provide enhanced performance through tighter tolerance (±1%) or increased power rating (0.667W) while maintaining the same resistance value, package, and automotive qualification. These are suitable when design margins permit specification improvements.

Similar Alternatives share core electrical specifications but differ in specific features such as moisture resistance characteristics or manufacturer-specific construction. These require verification of application-specific requirements before substitution.

The following parameters determine substitution eligibility:

• Resistance value (11 kOhms)
• Package type (1206)
• Power rating (minimum 0.25W)
• Operating temperature range (-55°C to 155°C minimum)
• Composition (Thick Film)

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Discontinued Part Substitution): CRCW120611K0JNEA (Vishay Dale) and RMCF1206JT11K0 (Stackpole Electronics Inc) are recommended as primary direct equivalents. Both maintain identical electrical specifications, AEC-Q200 automotive qualification, and active product status. CRCW120611K0JNEA offers the lowest seated height (0.60mm), which may provide advantages in space-constrained layouts.

For Enhanced Tolerance Requirements: CRCW120611K0FKEA (Vishay Dale) provides ±1% tolerance with ±100ppm/°C temperature coefficient, suitable for applications requiring tighter resistance accuracy. This upgrade maintains the same package and power rating while improving performance margins.

For Increased Power Dissipation: ERJ-P08J113V (Panasonic Electronic Components) offers 0.667W power rating with pulse withstanding capability, appropriate for circuits requiring higher thermal headroom while maintaining the same resistance and tolerance specifications.

For Non-Automotive Applications: CR1206-JW-113ELF (Bourns Inc.) provides equivalent electrical performance with moisture-resistant construction but lacks AEC-Q200 certification. This part is suitable only for non-automotive applications.

Parts to Avoid for New Designs: ERJ-8GEYJ113V (Panasonic) carries "Not For New Designs" status and should be used only for legacy system maintenance where no alternative exists.

Frequently Asked Questions (FAQ)

Q: Can I use CRCW120611K0JNEA as a direct replacement for MCR18EZPJ113? A: Yes. Both parts share identical resistance (11 kOhms), tolerance (±5%), power rating (0.25W), package (1206), temperature coefficient (±200ppm/°C), operating range (-55°C to 155°C), and AEC-Q200 automotive qualification. The CRCW part is currently in active production.

Q: What is the difference between the direct equivalent and the upgrade option CRCW120611K0FKEA? A: The upgrade provides tighter tolerance (±1% vs ±5%) and lower temperature coefficient (±100ppm/°C vs ±200ppm/°C). Both maintain 0.25W power rating and 1206 package. The upgrade is suitable when circuit design requires improved resistance stability.

Q: Can I use ERJ-P08J113V as a substitute? A: Yes, with consideration. This part maintains all electrical specifications but provides higher power rating (0.667W vs 0.25W). It is suitable for applications where increased thermal capacity is beneficial or required. The 1206 package and AEC-Q200 qualification remain unchanged.

Q: Why is CR1206-JW-113ELF listed but not recommended for automotive applications? A: CR1206-JW-113ELF lacks AEC-Q200 automotive qualification despite matching electrical specifications. It is suitable only for non-automotive circuits. For automotive applications, use CRCW120611K0JNEA or RMCF1206JT11K0.

Q: Are there height differences between substitute parts that affect PCB layout? A: Yes. Seated heights range from 0.60mm (CRCW parts) to 0.75mm (CR1206-JW-113ELF). Verify PCB clearance specifications before substitution, particularly in space-constrained designs or where solder reflow profiles are optimized for specific component heights.

Q: Should I use ERJ-8GEYJ113V for new production? A: No. This part carries "Not For New Designs" status. Use CRCW120611K0JNEA, RMCF1206JT11K0, or other active-status alternatives for new production. ERJ-8GEYJ113V is appropriate only for legacy system maintenance.

Q: Are all substitute parts RoHS3 compliant? A: All listed parts except CR1206-JW-113ELF are explicitly RoHS3 compliant. Verify RoHS compliance requirements for your specific application before final part selection.