MCR03EZPFX88R7 Equivalent & Substitute Parts

Part Overview

The MCR03EZPFX88R7 is an 88.7 Ohms ±1% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Rohm Semiconductor. This component is rated for automotive applications under AEC-Q200 standard with an operating temperature range of -55°C to 155°C. The part is currently discontinued at DiGi Electronics, making equivalent substitutes necessary for ongoing production and maintenance applications.

Substiute Parts

MCR03EZPFX88R7
Rohm SemiconductorIn Stock: 988MCR03EZPFX88R7 Datasheet
MCR03EZPFX88R7
Current Part
CRCW060388R7FKEA
Vishay DaleIn Stock: 34241CRCW060388R7FKEA Datasheet
CRCW060388R7FKEA
Direct
ERJ-3EKF88R7V
Panasonic Electronic ComponentsIn Stock: 70705ERJ-3EKF88R7V Datasheet
ERJ-3EKF88R7V
Direct
RMCF0603FT88R7
Stackpole Electronics IncIn Stock: 1676RMCF0603FT88R7 Datasheet
RMCF0603FT88R7
Direct
CR0603-FX-88R7ELF
Bourns Inc.In Stock: 25954CR0603-FX-88R7ELF Datasheet
CR0603-FX-88R7ELF
Similar
RC0603FR-0788R7L
YAGEOIn Stock: 44745RC0603FR-0788R7L Datasheet
RC0603FR-0788R7L
Similar

Key Parameters

Parameter Value
Resistance 88.7 Ohms
Tolerance ±1%
Power Rating 0.1W (1/10W)
Package / Case 0603 (1608 Metric)
Composition Thick Film
Temperature Coefficient ±100ppm/°C
Operating Temperature Range -55°C to 155°C
Automotive Rating AEC-Q200
RoHS Status ROHS3 Compliant
Moisture Sensitivity Level 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the MCR03EZPFX88R7 is determined by strict equivalence across the following parameters: resistance value (88.7 Ohms), tolerance (±1%), power rating (0.1W), package type (0603), composition (thick film), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). All substitute parts listed maintain these core electrical and mechanical specifications.

The substitute parts are categorized into two groups:

Direct Substitutes maintain full AEC-Q200 automotive qualification: CRCW060388R7FKEA (Vishay Dale), ERJ-3EKF88R7V (Panasonic Electronic Components), and RMCF0603FT88R7 (Stackpole Electronics Inc).

Similar Substitutes maintain all electrical parameters and package specifications but feature moisture-resistant construction without explicit AEC-Q200 designation: CR0603-FX-88R7ELF (Bourns Inc.) and RC0603FR-0788R7L (YAGEO).

Parameter Comparison

Manufacturer Part Number Manufacturer Resistance Tolerance Power (W) Package Temp Coeff Operating Temp AEC-Q200 Product Status Inventory
MCR03EZPFX88R7 Rohm Semiconductor 88.7 Ω ±1% 0.1 0603 ±100ppm/°C -55°C ~ 155°C Yes Discontinued 897 Pcs
CRCW060388R7FKEA Vishay Dale 88.7 Ω ±1% 0.1 0603 ±100ppm/°C -55°C ~ 155°C Yes Active 34170 Pcs
ERJ-3EKF88R7V Panasonic Electronic Components 88.7 Ω ±1% 0.1 0603 ±100ppm/°C -55°C ~ 155°C Yes Active 70612 Pcs
RMCF0603FT88R7 Stackpole Electronics Inc 88.7 Ω ±1% 0.1 0603 ±100ppm/°C -55°C ~ 155°C Yes Active 1629 Pcs
CR0603-FX-88R7ELF Bourns Inc. 88.7 Ω ±1% 0.1 0603 ±100ppm/°C -55°C ~ 155°C No Active 25865 Pcs
RC0603FR-0788R7L YAGEO 88.7 Ω ±1% 0.1 0603 ±100ppm/°C -55°C ~ 155°C No Active 44679 Pcs

Engineering Selection Recommendations

For automotive applications requiring AEC-Q200 compliance, select from the direct substitutes: CRCW060388R7FKEA, ERJ-3EKF88R7V, or RMCF0603FT88R7. All three maintain full automotive qualification and are currently in active production status with adequate inventory availability.

For non-automotive applications or where AEC-Q200 certification is not required, CR0603-FX-88R7ELF and RC0603FR-0788R7L are functionally equivalent alternatives with higher inventory levels and active product status. All substitute parts are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, matching the original component specifications.

Frequently Asked Questions (FAQ)

Q: Can I use a non-AEC-Q200 rated substitute in an automotive circuit? A: No. If the original design specifies AEC-Q200 compliance, only direct substitutes with AEC-Q200 rating (CRCW060388R7FKEA, ERJ-3EKF88R7V, RMCF0603FT88R7) are acceptable. Non-automotive rated parts do not meet automotive qualification standards.

Q: Are all substitute parts compatible with the same PCB footprint? A: Yes. All substitute parts use the 0603 (1608 Metric) package. Minor dimensional variations exist within tolerance (length 1.55-1.60mm, width 0.80-0.85mm, height 0.50-0.55mm), but these do not affect PCB footprint compatibility.

Q: What is the difference between direct and similar substitutes? A: Direct substitutes maintain AEC-Q200 automotive qualification. Similar substitutes maintain all electrical parameters and package specifications but feature moisture-resistant construction without explicit automotive certification. Selection depends on application requirements.

Q: Do all substitutes have the same temperature coefficient? A: Yes. All substitute parts maintain ±100ppm/°C temperature coefficient and -55°C to 155°C operating temperature range, matching the original MCR03EZPFX88R7 specifications.

Q: Which substitute has the best inventory availability? A: ERJ-3EKF88R7V (Panasonic) offers the highest inventory at 70,612 pieces, followed by RC0603FR-0788R7L (YAGEO) at 44,679 pieces. Both are in active production status.

Request Quote (Ships tomorrow)