Request Quote
(Ships tomorrow)
MCR03EZPFX7871 Equivalent & Substitute Parts
Part Overview
The MCR03EZPFX7871 is a 7.87 kOhms ±1% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Rohm Semiconductor. This component is rated for automotive applications under AEC-Q200 standard with an operating temperature range of -55°C to 155°C. The part is currently discontinued at DiGi Electronics, making equivalent substitutes necessary for ongoing production and maintenance applications.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Resistance | 7.87 kOhms |
| Tolerance | ±1% |
| Power Rating | 0.1W (1/10W) |
| Package / Case | 0603 (1608 Metric) |
| Composition | Thick Film |
| Temperature Coefficient | ±100ppm/°C |
| Operating Temperature Range | -55°C ~ 155°C |
| Automotive Rating | AEC-Q200 |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the MCR03EZPFX7871 is determined by strict equivalence across the following parameters:
- Resistance value: 7.87 kOhms (exact match required)
- Tolerance: ±1% (exact match required)
- Power rating: 0.1W / 1/10W (exact match required)
- Package: 0603 (1608 Metric) (exact match required)
- Composition: Thick Film (exact match required)
- Temperature coefficient: ±100ppm/°C (exact match required)
- Operating temperature range: -55°C ~ 155°C (exact match required)
- RoHS compliance: ROHS3 Compliant (exact match required)
- Moisture sensitivity: MSL 1 (exact match required)
All substitute parts listed below meet these criteria. Direct substitutes maintain full automotive AEC-Q200 certification. Similar substitutes meet all electrical and mechanical parameters but feature moisture-resistant construction instead of automotive-specific qualification.
Parameter Comparison
| Manufacturer Part Number | Manufacturer | Resistance | Tolerance | Power (W) | Package | Temp Coeff | Operating Temp | AEC-Q200 | Product Status | Packaging Type |
|---|---|---|---|---|---|---|---|---|---|---|
| MCR03EZPFX7871 | Rohm Semiconductor | 7.87 kΩ | ±1% | 0.1 | 0603 | ±100ppm/°C | -55°C ~ 155°C | Yes | Discontinued | - |
| CRCW06037K87FKEA | Vishay Dale | 7.87 kΩ | ±1% | 0.1 | 0603 | ±100ppm/°C | -55°C ~ 155°C | Yes | Active | Tape & Reel |
| ERJ-3EKF7871V | Panasonic Electronic Components | 7.87 kΩ | ±1% | 0.1 | 0603 | ±100ppm/°C | -55°C ~ 155°C | Yes | Active | Cut Tape & Digi-Reel |
| RMCF0603FT7K87 | Stackpole Electronics Inc | 7.87 kΩ | ±1% | 0.1 | 0603 | ±100ppm/°C | -55°C ~ 155°C | Yes | Active | Tape & Reel |
| CR0603-FX-7871ELF | Bourns Inc. | 7.87 kΩ | ±1% | 0.1 | 0603 | ±100ppm/°C | -55°C ~ 155°C | No | Active | Tape & Reel |
| RC0603FR-077K87L | YAGEO | 7.87 kΩ | ±1% | 0.1 | 0603 | ±100ppm/°C | -55°C ~ 155°C | No | Active | Tape & Reel |
Engineering Selection Recommendations
For automotive applications requiring AEC-Q200 certification, direct substitutes CRCW06037K87FKEA (Vishay Dale), ERJ-3EKF7871V (Panasonic Electronic Components), and RMCF0603FT7K87 (Stackpole Electronics Inc) are fully qualified replacements. All three maintain active product status with established supply availability.
For non-automotive applications or where moisture-resistant construction is preferred, CR0603-FX-7871ELF (Bourns Inc.) and RC0603FR-077K87L (YAGEO) provide equivalent electrical and mechanical performance. Both are actively manufactured with high inventory levels.
Selection between active substitutes should be based on packaging preference (Tape & Reel or Cut Tape), supply chain availability, and procurement lead times.
Frequently Asked Questions (FAQ)
Q: Can I use CR0603-FX-7871ELF or RC0603FR-077K87L in an automotive AEC-Q200 application?
A: No. These parts feature moisture-resistant construction rather than automotive AEC-Q200 certification. For automotive applications, use CRCW06037K87FKEA, ERJ-3EKF7871V, or RMCF0603FT7K87.
Q: Are all substitute parts physically compatible with the original MCR03EZPFX7871 footprint?
A: Yes. All substitute parts use the 0603 (1608 Metric) package. Physical dimensions vary slightly within standard tolerances (length 1.55mm to 1.60mm, width 0.80mm to 0.85mm, height 0.50mm to 0.55mm), but all are compatible with standard 0603 PCB layouts.
Q: What is the difference between Tape & Reel and Cut Tape packaging?
A: Both are surface-mount packaging formats. Tape & Reel is supplied on continuous carrier tape in reel format for automated assembly. Cut Tape is supplied in shorter tape segments. Selection depends on assembly equipment and order quantity requirements.
Q: Do all substitute parts meet RoHS3 compliance?
A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the original part specifications.
Q: Which substitute has the highest inventory availability?
A: RC0603FR-077K87L (YAGEO) has 200,622 pieces in stock. RMCF0603FT7K87 (Stackpole) has 69,850 pieces. CRCW06037K87FKEA (Vishay Dale) has 53,889 pieces. ERJ-3EKF7871V (Panasonic) has 46,065 pieces.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts





