MCR03EZPFX4022 Equivalent & Substitute Parts

Part Overview

The MCR03EZPFX4022 is a 40.2 kOhms ±1% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Rohm Semiconductor. This component is rated for automotive applications under AEC-Q200 standard with operating temperature range of -55°C to 155°C. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent alternatives that maintain identical electrical and mechanical specifications for direct board-level substitution.

Substiute Parts

MCR03EZPFX4022
Rohm SemiconductorIn Stock: 779MCR03EZPFX4022 Datasheet
MCR03EZPFX4022
Current Part
CRCW060340K2FKEA
Vishay DaleIn Stock: 25247CRCW060340K2FKEA Datasheet
CRCW060340K2FKEA
Direct
CRCW060340K2FKTA
Vishay DaleIn Stock: 14244CRCW060340K2FKTA Datasheet
CRCW060340K2FKTA
Direct
ERJ-3EKF4022V
Panasonic Electronic ComponentsIn Stock: 130508ERJ-3EKF4022V Datasheet
ERJ-3EKF4022V
Direct
RMCF0603FG40K2
Stackpole Electronics IncIn Stock: 19381RMCF0603FG40K2 Datasheet
RMCF0603FG40K2
Direct
RMCF0603FT40K2
Stackpole Electronics IncIn Stock: 71659RMCF0603FT40K2 Datasheet
RMCF0603FT40K2
Direct
CR0603-FX-4022ELF
Bourns Inc.In Stock: 177152CR0603-FX-4022ELF Datasheet
CR0603-FX-4022ELF
Similar
RC0603FR-0740K2L
YAGEOIn Stock: 9267RC0603FR-0740K2L Datasheet
RC0603FR-0740K2L
Similar

Key Parameters

Parameter Specification
Resistance Value 40.2 kOhms
Tolerance ±1%
Power Rating 0.1W (1/10W)
Package / Case 0603 (1608 Metric)
Composition Thick Film
Temperature Coefficient ±100ppm/°C
Operating Temperature Range -55°C ~ 155°C
Automotive Rating AEC-Q200
RoHS Status ROHS3 Compliant
Moisture Sensitivity Level 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

  • Resistance value: 40.2 kOhms
  • Tolerance: ±1%
  • Power rating: 0.1W (1/10W)
  • Package: 0603 (1608 Metric)
  • Composition: Thick Film
  • Temperature coefficient: ±100ppm/°C
  • Operating temperature range: -55°C ~ 155°C
  • Moisture sensitivity level: 1 (Unlimited)

Parts are classified into two categories:

Direct Substitutes maintain full equivalence including automotive AEC-Q200 certification and ROHS3 compliance status.

Similar Substitutes meet all electrical and mechanical parameters but differ in feature classification (moisture resistant designation instead of automotive rating) or compliance status.

Parameter Comparison

Part Number Manufacturer Resistance Tolerance Power Package Temp Coeff Op Temp Range AEC-Q200 RoHS Status Product Status
MCR03EZPFX4022 Rohm Semiconductor 40.2 kΩ ±1% 0.1W 0603 ±100ppm/°C -55°C ~ 155°C Yes ROHS3 Discontinued
CRCW060340K2FKEA Vishay Dale 40.2 kΩ ±1% 0.1W 0603 ±100ppm/°C -55°C ~ 155°C Yes ROHS3 Active
CRCW060340K2FKTA Vishay Dale 40.2 kΩ ±1% 0.1W 0603 ±100ppm/°C -55°C ~ 155°C Yes RoHS Non-compliant Active
ERJ-3EKF4022V Panasonic Electronic Components 40.2 kΩ ±1% 0.1W 0603 ±100ppm/°C -55°C ~ 155°C Yes ROHS3 Active
RMCF0603FG40K2 Stackpole Electronics Inc 40.2 kΩ ±1% 0.1W 0603 ±100ppm/°C -55°C ~ 155°C Yes ROHS3 Active
RMCF0603FT40K2 Stackpole Electronics Inc 40.2 kΩ ±1% 0.1W 0603 ±100ppm/°C -55°C ~ 155°C Yes ROHS3 Active
CR0603-FX-4022ELF Bourns Inc. 40.2 kΩ ±1% 0.1W 0603 ±100ppm/°C -55°C ~ 155°C No ROHS3 Active
RC0603FR-0740K2L YAGEO 40.2 kΩ ±1% 0.1W 0603 ±100ppm/°C -55°C ~ 155°C No ROHS3 Active

Engineering Selection Recommendations

Direct Substitutes (Full Equivalence):

CRCW060340K2FKEA, ERJ-3EKF4022V, RMCF0603FG40K2, and RMCF0603FT40K2 are direct substitutes. All maintain AEC-Q200 automotive certification, ROHS3 compliance, and active product status. These parts are interchangeable at the board level without design modification.

Conditional Substitutes:

CRCW060340K2FKTA is electrically and mechanically equivalent but carries RoHS non-compliant status and REACH affected designation. Selection requires verification against end-product compliance requirements.

Similar Substitutes (Feature Variation):

CR0603-FX-4022ELF and RC0603FR-0740K2L meet all electrical and mechanical parameters but lack AEC-Q200 automotive certification, featuring moisture-resistant designation instead. These are suitable for non-automotive applications or where automotive qualification is not required.

Availability Consideration:

ERJ-3EKF4022V (130,457 pcs) and CR0603-FX-4022ELF (177,068 pcs) demonstrate highest inventory availability among active alternatives.

Frequently Asked Questions (FAQ)

Q: Can I substitute MCR03EZPFX4022 with any of these parts in an automotive application?

A: Direct substitutes CRCW060340K2FKEA, ERJ-3EKF4022V, RMCF0603FG40K2, and RMCF0603FT40K2 maintain AEC-Q200 certification and are suitable for automotive use. CR0603-FX-4022ELF and RC0603FR-0740K2L lack automotive qualification and are not recommended for automotive applications.

Q: What is the difference between direct and similar substitutes?

A: Direct substitutes maintain identical feature sets including AEC-Q200 automotive rating and ROHS3 compliance. Similar substitutes meet all electrical and mechanical specifications but differ in feature classification or certification status.

Q: Are there physical dimension differences between these parts?

A: All parts use 0603 (1608 Metric) package. Minor variations exist in seated height (0.020" to 0.022") and length/width dimensions (1.55mm to 1.60mm L, 0.80mm to 0.85mm W). These variations remain within standard 0603 package tolerances and do not affect PCB footprint compatibility.

Q: Which substitute offers the best availability?

A: CR0603-FX-4022ELF (177,068 pcs) and ERJ-3EKF4022V (130,457 pcs) provide highest inventory levels. For automotive-qualified alternatives, ERJ-3EKF4022V offers superior availability.

Q: Does RoHS compliance status affect substitution eligibility?

A: RoHS compliance is a regulatory requirement dependent on end-product application and target market. CRCW060340K2FKTA is RoHS non-compliant and requires compliance verification before use. All other alternatives are ROHS3 compliant.

Q: Can CRCW060340K2FKTA be used as a substitute?

A: CRCW060340K2FKTA is electrically and mechanically equivalent but carries RoHS non-compliant and REACH affected status. Selection requires confirmation that end-product compliance requirements permit non-compliant component use.

Request Quote (Ships tomorrow)