MCR03EZPFX1692 Equivalent & Substitute Parts

Part Overview

The MCR03EZPFX1692 is a 16.9 kOhms ±1% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Rohm Semiconductor. This component is rated for automotive applications under AEC-Q200 standard with an operating temperature range of -55°C to 155°C. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent alternatives that maintain identical electrical and mechanical specifications for seamless circuit board replacement.

Substiute Parts

MCR03EZPFX1692

Rohm SemiconductorIn Stock: 924MCR03EZPFX1692 Datasheet

Current PartRFQ

CRCW060316K9FKEA

Vishay DaleIn Stock: 149525CRCW060316K9FKEA Datasheet

DirectRFQ

ERJ-3EKF1692V

Panasonic Electronic ComponentsIn Stock: 156047ERJ-3EKF1692V Datasheet

DirectRFQ

RMCF0603FT16K9

Stackpole Electronics IncIn Stock: 79705RMCF0603FT16K9 Datasheet

DirectRFQ

CR0603-FX-1692ELF

Bourns Inc.In Stock: 39943CR0603-FX-1692ELF Datasheet

SimilarRFQ

RC0603FR-0716K9L

YAGEOIn Stock: 80089RC0603FR-0716K9L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MCR03EZPFX1692 is determined by strict equivalence across the following parameters: resistance value (16.9 kOhms), tolerance (±1%), power rating (0.1W), package type (0603), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C to 155°C), and compliance certifications (RoHS3, REACH Unaffected, EAR99).

Parts are classified into two categories:

Direct Substitutes maintain all electrical and mechanical specifications including AEC-Q200 automotive rating: CRCW060316K9FKEA (Vishay Dale), ERJ-3EKF1692V (Panasonic Electronic Components), and RMCF0603FT16K9 (Stackpole Electronics Inc).

Similar Substitutes match all core electrical and mechanical parameters but feature moisture-resistant composition instead of automotive AEC-Q200 rating: CR0603-FX-1692ELF (Bourns Inc.) and RC0603FR-0716K9L (YAGEO).

Parameter Comparison

Engineering Selection Recommendations

For applications requiring strict automotive AEC-Q200 compliance, select from the direct substitutes: CRCW060316K9FKEA, ERJ-3EKF1692V, or RMCF0603FT16K9. All three maintain full electrical equivalence and automotive certification.

CRCW060316K9FKEA (Vishay Dale) offers the highest inventory availability at 149,431 pieces and is available in both Cut Tape and Digi-Reel packaging formats, providing flexibility for different procurement workflows.

ERJ-3EKF1692V (Panasonic Electronic Components) and RMCF0603FT16K9 (Stackpole Electronics Inc) are both active products supplied in Tape & Reel format with substantial inventory levels (155,992 and 79,640 pieces respectively).

For non-automotive applications where AEC-Q200 certification is not required, CR0603-FX-1692ELF (Bourns Inc.) and RC0603FR-0716K9L (YAGEO) provide equivalent electrical performance with moisture-resistant composition. Both are active products with adequate inventory.

All substitute parts maintain RoHS3 compliance, REACH unaffected status, and EAR99 export classification consistent with the original MCR03EZPFX1692.

Frequently Asked Questions (FAQ)

Q: Can I use CR0603-FX-1692ELF or RC0603FR-0716K9L as direct replacements for MCR03EZPFX1692 in automotive circuits?

A: CR0603-FX-1692ELF and RC0603FR-0716K9L are electrically equivalent but lack AEC-Q200 automotive certification. Use these only in non-automotive applications. For automotive circuits, select CRCW060316K9FKEA, ERJ-3EKF1692V, or RMCF0603FT16K9.

Q: Are all substitute parts physically compatible with the original PCB footprint?

A: All substitute parts use the 0603 (1608 Metric) package. Physical dimensions vary slightly between manufacturers (length ranges 1.55–1.60mm, width 0.80–0.85mm, height 0.50–0.55mm), but these variations fall within standard PCB design tolerances for 0603 components and do not affect footprint compatibility.

Q: What is the difference between Cut Tape and Tape & Reel packaging?

A: Cut Tape (CT) packaging is suitable for small-quantity orders and manual assembly. Tape & Reel (TR) packaging is optimized for high-volume automated pick-and-place assembly. CRCW060316K9FKEA is available in both formats; other substitutes are supplied in Tape & Reel only.

Q: Do all substitute parts have the same moisture sensitivity level?

A: Yes. All substitute parts, including the original MCR03EZPFX1692, have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.

Q: Which substitute offers the best availability?

A: CRCW060316K9FKEA (Vishay Dale) has the highest inventory at 149,431 pieces. ERJ-3EKF1692V (Panasonic) follows with 155,992 pieces. Both are suitable for immediate procurement.