MCPF07N65-BP N-Channel 650V 7A MOSFET Equivalent & Substitute Parts

Part Overview

The MCPF07N65-BP is an N-Channel 650V 7A MOSFET manufactured by Micro Commercial Co in a Through Hole TO-220F package. This device is classified as obsolete, necessitating identification of equivalent substitute components for ongoing design requirements and production continuity. The part operates across a temperature range of -55°C to 150°C and is RoHS3 compliant with unlimited moisture sensitivity level rating.

Key Parameters

Parameter	Value	Unit
Manufacturer Part Number	MCPF07N65-BP	—
Manufacturer	Micro Commercial Co	—
FET Type	N-Channel	—
Technology	MOSFET (Metal Oxide)	—
Drain to Source Voltage (Vdss)	650	V
Current - Continuous Drain (Id) @ 25°C	7	A
Drive Voltage (Max Rds On)	10	V
Rds On (Max) @ Id, Vgs	1.4 @ 3.5A, 10V	Ohm
Vgs(th) (Max) @ Id	4.5 @ 250µA	V
Gate Charge (Qg) (Max) @ Vgs	26 @ 10V	nC
Vgs (Max)	±30	V
Input Capacitance (Ciss) (Max) @ Vds	1600 @ 25V	pF
Operating Temperature	-55 to 150	°C
Mounting Type	Through Hole	—
Package / Case	TO-220-3 Full Pack	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—
Product Status	Obsolete	—

Substitute Part Grouping Explanation

Substitute parts for the MCPF07N65-BP are selected based on the following critical electrical and mechanical parameters:

Voltage Rating Compatibility: All substitute parts maintain a Drain to Source Voltage (Vdss) rating of 600V or higher, ensuring operation within the original 650V specification envelope.

Current Handling Capability: Substitute parts are rated for continuous drain current (Id) of 4.2A to 5.4A at 25°C, providing current capacity within the operational range of the original 7A specification.

Gate Threshold Voltage (Vgs(th)): All substitutes maintain a maximum gate threshold voltage of 4.5V at specified test conditions, ensuring compatible gate drive requirements.

Maximum Gate Voltage (Vgs): All substitute parts are rated for ±30V maximum gate voltage, matching the original specification.

Package Configuration: All substitute parts are housed in TO-220-3 Full Pack configuration with Through Hole mounting, maintaining mechanical and thermal interface compatibility.

Compliance Standards: All substitute parts are RoHS3 compliant with MSL rating of 1 (Unlimited), matching the original part's regulatory status.

Product Status: Active substitute parts from STMicroelectronics ensure long-term availability and supply chain continuity.

Parameter Comparison

Parameter	MCPF07N65-BP	STF5N62K3	STF6N65K3	STP5NK60ZFP
Manufacturer	Micro Commercial Co	STMicroelectronics	STMicroelectronics	STMicroelectronics
FET Type	N-Channel	N-Channel	N-Channel	N-Channel
Technology	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)
Drain to Source Voltage (Vdss)	650 V	620 V	650 V	600 V
Current - Continuous Drain (Id) @ 25°C	7 A	4.2 A	5.4 A	5 A
Drive Voltage (Max Rds On)	10 V	10 V	10 V	10 V
Rds On (Max) @ Id, Vgs	1.4 Ohm @ 3.5A, 10V	1.6 Ohm @ 2.1A, 10V	1.3 Ohm @ 2.8A, 10V	1.6 Ohm @ 2.5A, 10V
Vgs(th) (Max) @ Id	4.5 V @ 250µA	4.5 V @ 50µA	4.5 V @ 50µA	4.5 V @ 50µA
Gate Charge (Qg) (Max) @ Vgs	26 nC @ 10V	26 nC @ 10V	35 nC @ 10V	34 nC @ 10V
Vgs (Max)	±30 V	±30 V	±30 V	±30 V
Input Capacitance (Ciss) (Max) @ Vds	1600 pF @ 25V	680 pF @ 50V	880 pF @ 50V	690 pF @ 25V
Operating Temperature	-55 to 150 °C	-55 to 150 °C	-55 to 150 °C	-55 to 150 °C
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	TO-220-3 Full Pack	TO-220-3 Full Pack	TO-220-3 Full Pack	TO-220-3 Full Pack
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Obsolete	Active	Active	Active

Engineering Selection Recommendations

STF6N65K3 (Primary Substitute)

The STF6N65K3 from STMicroelectronics is the primary substitute for the MCPF07N65-BP. This part maintains identical Drain to Source Voltage (Vdss) of 650V and operates across the same temperature range (-55°C to 150°C). The device is classified as Active with full RoHS3 compliance and unlimited MSL rating. The continuous drain current rating of 5.4A provides adequate capacity for applications designed around the original 7A specification. Gate threshold voltage and maximum gate voltage specifications are identical to the original part.

STF5N62K3 (Secondary Substitute)

The STF5N62K3 is an alternative substitute with a Drain to Source Voltage rating of 620V and continuous drain current of 4.2A. This part is suitable for applications where the current requirement does not exceed 4.2A and voltage stress remains below 620V. The device maintains Active product status with full RoHS3 compliance and unlimited MSL rating. Gate threshold voltage and maximum gate voltage specifications match the original part.

STP5NK60ZFP (Tertiary Substitute)

The STP5NK60ZFP provides a substitute option with a Drain to Source Voltage rating of 600V and continuous drain current of 5A. This part is classified as Active with full RoHS3 compliance and unlimited MSL rating. The device operates across the same temperature range as the original part (-55°C to 150°C). This substitute is applicable for applications where voltage stress remains below 600V and current requirements do not exceed 5A.

All substitute parts are manufactured by STMicroelectronics, ensuring established supply chain availability and technical support infrastructure. Selection among these substitutes depends on specific application voltage and current requirements within the operational envelope defined by each part's electrical specifications.

Frequently Asked Questions (FAQ)

Q: Can the STF6N65K3 directly replace the MCPF07N65-BP in all applications?

A: The STF6N65K3 is electrically compatible with the MCPF07N65-BP for applications operating at or below 5.4A continuous drain current and 650V drain to source voltage. Both parts share identical gate threshold voltage (4.5V), maximum gate voltage (±30V), and operating temperature range (-55°C to 150°C). The TO-220-3 Full Pack configuration ensures mechanical and thermal interface compatibility. Applications requiring the full 7A continuous drain current of the original part require evaluation of actual current demand.

Q: What is the primary difference between the three substitute options?

A: The three substitute parts differ in voltage and current ratings. The STF6N65K3 matches the original 650V voltage rating with 5.4A current capacity. The STF5N62K3 provides 620V voltage rating with 4.2A current capacity. The STP5NK60ZFP offers 600V voltage rating with 5A current capacity. All three maintain identical gate drive characteristics and operating temperature range. Selection depends on the specific voltage and current requirements of the application.

Q: Are all substitute parts RoHS3 compliant?

A: All three substitute parts (STF6N65K3, STF5N62K3, and STP5NK60ZFP) are RoHS3 compliant with Moisture Sensitivity Level rating of 1 (Unlimited). This compliance status matches the original MCPF07N65-BP specification, ensuring regulatory compatibility in applications subject to RoHS requirements.

Q: Do the substitute parts require different gate drive voltage?

A: No. All substitute parts maintain a maximum gate voltage specification of ±30V and gate threshold voltage of 4.5V, identical to the original MCPF07N65-BP. Gate drive circuits designed for the original part operate without modification for all three substitute options.

Q: What is the significance of the TO-220-3 Full Pack configuration?

A: The TO-220-3 Full Pack configuration is a Through Hole package with three leads (Gate, Drain, Source) in a standardized thermal interface form factor. All substitute parts maintain this identical package configuration, ensuring mechanical compatibility with existing printed circuit board layouts, heatsink mounting arrangements, and thermal management designs.

Q: How do the input capacitance values affect substitution?

A: Input capacitance (Ciss) values differ among the substitute parts: MCPF07N65-BP at 1600 pF, STF6N65K3 at 880 pF, STF5N62K3 at 680 pF, and STP5NK60ZFP at 690 pF. Lower input capacitance in substitute parts results in faster switching response and reduced gate drive power requirements. Applications with gate drive circuits designed for the original 1600 pF capacitance operate with improved performance characteristics using substitute parts with lower capacitance values.

Q: Is the obsolete status of the MCPF07N65-BP a critical factor in selecting substitutes?

A: The obsolete product status of the MCPF07N65-BP necessitates substitution for new production and long-term supply continuity. All three substitute parts are classified as Active, ensuring ongoing availability from STMicroelectronics. Active product status provides access to current manufacturing processes, technical documentation, and supply chain support.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message