MCP606T-I/ST Equivalent & Substitute Parts

Part Overview

The MCP606T-I/ST is a general-purpose operational amplifier manufactured by Microchip Technology, designed for rail-to-rail signal processing applications. This single-circuit amplifier operates across a 2.5 V to 6 V supply range and is housed in an 8-TSSOP surface-mount package. The device is classified as Active product status and maintains full RoHS3 compliance. Substitute parts are identified when packaging format differs while maintaining identical electrical performance and mechanical compatibility, enabling procurement flexibility across supply channels.

Substiute Parts

MCP606T-I/ST

Microchip TechnologyIn Stock: 790MCP606T-I/ST Datasheet

Current PartRFQ

MCP606-I/ST

Microchip TechnologyIn Stock: 850MCP606-I/ST Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MCP606T-I/ST is determined by equivalence across all electrical performance parameters and mechanical form factor specifications. The substitute part MCP606-I/ST maintains identical electrical characteristics including slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current capability, and supply voltage range. Both parts operate within the same temperature range and utilize the 8-TSSOP surface-mount package with identical physical dimensions.

The primary distinction between the main part and substitute is the packaging format: MCP606T-I/ST is supplied in Tape & Reel (TR) configuration, while MCP606-I/ST is supplied in Tube packaging. This difference reflects distribution and handling methodology only and does not affect electrical performance or circuit-level compatibility. Both parts share the same base product number (MCP606), Active product status, and full compliance certifications including RoHS3 and REACH Unaffected status.

Substitution is valid when circuit design requirements match the specified electrical parameters and when the 8-TSSOP surface-mount package is compatible with the printed circuit board layout.

Parameter Comparison

Engineering Selection Recommendations

Selection between MCP606T-I/ST and MCP606-I/ST is based on procurement and logistics requirements rather than electrical performance differentiation. Both parts are Active products manufactured by Microchip Technology with identical electrical specifications and mechanical compatibility.

The MCP606T-I/ST in Tape & Reel packaging is suitable for high-volume automated assembly operations where continuous reel feeding into pick-and-place equipment is standard practice. The MCP606-I/ST in Tube packaging is suitable for lower-volume applications, manual assembly processes, or inventory management scenarios where individual component handling is preferred.

Both parts maintain full RoHS3 compliance and REACH Unaffected status, satisfying regulatory requirements for industrial and commercial applications. The Moisture Sensitivity Level of 1 (Unlimited) indicates no special moisture control requirements during storage or handling for either packaging format.

Circuit-level substitution is direct and unconditional when the 8-TSSOP surface-mount package footprint is present on the printed circuit board and when the specified electrical parameters satisfy application requirements.

Frequently Asked Questions (FAQ)

Q: Can MCP606-I/ST (Tube) be used as a direct replacement for MCP606T-I/ST (Tape & Reel)?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. Substitution is valid for any application where the 8-TSSOP surface-mount package is compatible with the circuit board layout.

Q: Are there any electrical performance differences between the two packaging formats?

A: No. Electrical specifications including slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current, and operating temperature range are identical across both parts.

Q: What is the significance of the packaging format difference?

A: Tape & Reel (TR) packaging is optimized for automated high-volume assembly with continuous reel feeding. Tube packaging is optimized for manual handling, lower-volume assembly, or component inventory management. The choice depends on manufacturing process and volume requirements, not circuit performance.

Q: Do both parts require the same printed circuit board footprint?

A: Yes. Both MCP606T-I/ST and MCP606-I/ST use the 8-TSSOP package with identical physical dimensions (0.173" width, 4.40mm). PCB footprints are interchangeable.

Q: Are there any compliance or regulatory differences between the two parts?

A: No. Both parts maintain identical RoHS3 compliance, REACH Unaffected status, and Moisture Sensitivity Level (MSL) of 1 (Unlimited). Regulatory requirements are satisfied equally by either part.

Q: What is the operating temperature range for both parts?

A: Both MCP606T-I/ST and MCP606-I/ST operate across -40°C to 85°C, suitable for industrial and commercial temperature environments.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. When the circuit design specifies the MCP606 base product number with 8-TSSOP surface-mount packaging, either the Tape & Reel or Tube variant is functionally equivalent and can be substituted without circuit modification.