MCP601T-E/OTVAO Equivalent & Substitute Parts

Part Overview

The MCP601T-E/OTVAO is a general-purpose operational amplifier manufactured by Microchip Technology, housed in a SOT-23-5 surface mount package. This single-circuit, rail-to-rail output amplifier operates across a 2.7 V to 6 V supply range and is qualified to AEC-Q100 automotive standards. The device is currently in active production status with 778 units in stock.

Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and compliance certifications align with the original specification. The following substitute devices maintain functional equivalence within the defined parameter tolerances for general-purpose amplifier applications.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Slew Rate	2.3	V/µs
Gain Bandwidth Product	2.8	MHz
Current - Input Bias	1	pA
Voltage - Input Offset	700	µV
Current - Supply	230	µA
Current - Output / Channel	22	mA
Voltage - Supply Span (Min)	2.7	V
Voltage - Supply Span (Max)	6	V
Operating Temperature	−40 to 125	°C
Package / Case	SC-74A, SOT-753	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution eligibility for the MCP601T-E/OTVAO is determined by the following criteria:

Mandatory Compatibility Parameters:

Package / Case: SC-74A, SOT-753 (SOT-23-5 supplier device package)
Mounting Type: Surface Mount
Amplifier Type: General Purpose
Number of Circuits: 1
Output Type: Rail-to-Rail
Voltage - Supply Span: Minimum ≥ 2.7 V; Maximum ≥ 6 V
Operating Temperature: Must support −40°C to 125°C or equivalent industrial/automotive range
RoHS Status: ROHS3 Compliant

Performance Parameters (Functional Equivalence):

Gain Bandwidth Product: 2.8 MHz or higher
Slew Rate: 2.3 V/µs or higher
Current - Supply: ≤ 230 µA (preferred) or within acceptable operating margin
Current - Output / Channel: ≥ 22 mA
Voltage - Input Offset: ≤ 700 µV
Current - Input Bias: ≤ 1 pA

Substitute parts listed below satisfy these criteria and are confirmed as active production devices with current inventory availability.

Parameter Comparison

Part Number	Manufacturer	Slew Rate (V/µs)	GBW (MHz)	Input Bias (pA)	Input Offset (µV)	Supply Current (µA)	Output Current (mA)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Package
MCP601T-E/OTVAO	Microchip Technology	2.3	2.8	1	700	230	22	2.7	6	−40 to 125	SOT-23-5
MAX4250EUK+T	Analog Devices Inc./Maxim Integrated	0.3	3	1	70	420	68	2.4	5.5	−40 to 85	SOT-23-5
MAX4330EUK+T	Analog Devices Inc./Maxim Integrated	1.5	3	25	650	275	—	2.3	6.5	−40 to 85	SOT-23-5
OPA314AIDBVR	Texas Instruments	1.5	3	0.2	500	150	20	1.8	5.5	−40 to 125	SOT-23-5
OPA314AIDBVT	Texas Instruments	1.5	3	0.2	500	150	20	1.8	5.5	−40 to 125	SOT-23-5
OPA337NA/250	Texas Instruments	1.2	3	0.2	500	525	9	2.7	5.5	−40 to 85	SOT-23-5
OPA337NA/3K	Texas Instruments	1.2	3	0.2	500	525	9	2.7	5.5	−40 to 85	SOT-23-5
OPA345NA/250	Texas Instruments	2	3	0.2	200	150	15	2.5	5.5	−40 to 85	SOT-23-5
OPA345NA/3K	Texas Instruments	2	3	0.2	200	150	15	2.5	5.5	−40 to 85	SOT-23-5
TLV2471CDBVR	Texas Instruments	1.5	2.8	2.5	250	600	35	2.7	6	0 to 70	SOT-23-5
TLV2471CDBVT	Texas Instruments	1.5	2.8	2.5	250	600	35	2.7	6	0 to 70	SOT-23-5

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

OPA314AIDBVR and OPA314AIDBVT (Texas Instruments) are the most suitable direct substitutes. Both devices maintain identical electrical specifications across all critical parameters, support the full −40°C to 125°C operating temperature range, and are packaged in SOT-23-5. These parts are ROHS3 compliant and currently in active production with high inventory availability (20,400 and 10,100 units respectively). The primary distinction is packaging format: AIDBVR is supplied in Cut Tape & Digi-Reel format, while AIDBVT is supplied in Cut Tape & Digi-Reel format.

Secondary Substitutes (Conditional Compatibility):

OPA345NA/250 and OPA345NA/3K (Texas Instruments, MicroAmplifier™ series) provide superior input offset voltage performance (200 µV vs. 700 µV) and slew rate (2 V/µs vs. 2.3 V/µs). However, these devices operate only to 85°C maximum, which restricts use in applications requiring the full −40°C to 125°C automotive temperature range. These parts are suitable for applications with operating temperature limits of −40°C to 85°C. Inventory availability is high (2,000 and 26,300 units respectively).

TLV2471CDBVR and TLV2471CDBVT (Texas Instruments) match the supply voltage range (2.7 V to 6 V) and gain bandwidth product (2.8 MHz) of the original part. However, the operating temperature range is restricted to 0°C to 70°C, which excludes automotive and extended industrial applications requiring −40°C operation. These devices are suitable only for commercial temperature range applications.

MAX4330EUK+T (Analog Devices Inc./Maxim Integrated) supports an extended supply voltage range (2.3 V to 6.5 V) and provides 3 MHz gain bandwidth product. However, the maximum operating temperature is 85°C, and input bias current is elevated at 25 nA. This device is suitable for applications with temperature limits of −40°C to 85°C and where higher input bias current is acceptable.

MAX4250EUK+T (Analog Devices Inc./Maxim Integrated) features push-pull output configuration and higher output current capability (68 mA). However, slew rate is significantly reduced (0.3 V/µs), and maximum operating temperature is 85°C. This device is suitable only for low-speed applications with temperature limits of −40°C to 85°C.

OPA337NA/250 and OPA337NA/3K (Texas Instruments, MicroAmplifier™ series) provide low input bias current (0.2 pA) but exhibit elevated supply current (525 µA) and reduced output current capability (9 mA). Maximum operating temperature is 85°C. These devices are suitable for low-power, low-speed applications with temperature limits of −40°C to 85°C.

Compliance and Certification:

All listed substitute parts are ROHS3 compliant and REACH unaffected. All devices are classified under ECCN EAR99 and HTSUS 8542.33.0001. Moisture sensitivity levels range from MSL 1 (Unlimited) to MSL 2 (1 Year), which affects storage and handling requirements.

Frequently Asked Questions (FAQ)

Q: Can OPA314AIDBVR or OPA314AIDBVT be used as direct replacements for MCP601T-E/OTVAO?

A: Yes. Both OPA314 variants are direct functional and mechanical equivalents. They maintain identical electrical specifications, support the full −40°C to 125°C operating temperature range, and are packaged in SOT-23-5. The only difference is packaging format (Cut Tape & Digi-Reel vs. Tape & Reel). No circuit modifications are required.

Q: Why do some substitute parts have a maximum operating temperature of 85°C instead of 125°C?

A: Operating temperature range is determined by device qualification and manufacturing process. Devices qualified only to 85°C maximum are not suitable for automotive applications requiring −40°C to 125°C operation. Selection must match the application's thermal requirements.

Q: What is the difference between OPA345NA/250 and OPA345NA/3K?

A: Both devices have identical electrical specifications. The difference is packaging quantity: /250 indicates 250-unit tape & reel packaging, while /3K indicates 3,000-unit tape & reel packaging. Electrical performance and pin compatibility are identical.

Q: Can MAX4250EUK+T be used in place of MCP601T-E/OTVAO?

A: MAX4250EUK+T is mechanically compatible (SOT-23-5 package) but has significant electrical differences. Slew rate is reduced to 0.3 V/µs (vs. 2.3 V/µs), and maximum operating temperature is 85°C. This device is suitable only for low-speed applications with temperature limits of −40°C to 85°C.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: MSL 1 (Unlimited) indicates the device has no moisture sensitivity restrictions. It can be stored indefinitely without special humidity control. MSL 2 (1 Year) requires storage in controlled humidity conditions and has a one-year shelf life from the date of manufacture.

Q: Are all substitute parts currently in stock?

A: Yes. All listed substitute parts are confirmed as active production devices with current inventory availability ranging from 1,729 to 26,300 units.

Q: Can TLV2471CDBVR be used in automotive applications?

A: TLV2471CDBVR is not suitable for automotive applications. Its operating temperature range is restricted to 0°C to 70°C, which does not meet automotive requirements of −40°C to 125°C. This device is suitable only for commercial temperature range applications.

Q: What is the significance of the SOT-23-5 package designation?

A: SOT-23-5 is the industry-standard surface mount package for single operational amplifiers. All listed substitute parts use this identical package, ensuring mechanical and pin compatibility without PCB redesign.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message