MCP2561T-H/MF Equivalent & Substitute Parts

Part Overview

The MCP2561T-H/MF is a half-duplex CAN transceiver manufactured by Microchip Technology, designed for CANbus interface applications. This IC operates as a 1/1 transceiver in an 8-DFN (3x3) surface mount package with an exposed pad. The device is currently in active production status with 969 units available in new original inventory. Alternative part numbers are necessary when tape & reel packaging is unavailable or when different packaging formats are required for production workflows.

Substiute Parts

MCP2561T-H/MF

Microchip TechnologyIn Stock: 1011MCP2561T-H/MF Datasheet

Current PartRFQ

MCP2562T-H/MF

Microchip TechnologyIn Stock: 4131MCP2562T-H/MF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MCP2561T-H/MF is determined by strict equivalence across the following critical parameters:

• Transceiver Type & Protocol: Both parts must be half-duplex CAN transceivers with 1/1 driver/receiver configuration
• Package Specification: Both parts must use 8-VDFN Exposed Pad (8-DFN 3x3) surface mount package
• Electrical Specifications: Supply voltage range (4.5V ~ 5.5V), operating temperature range (-40°C ~ 150°C), and receiver hysteresis (200 mV) must be identical
• Compliance & Certifications: RoHS3 compliance, MSL rating, and regulatory status must match
• Packaging Format: Substitutes may differ in packaging format (Tape & Reel vs. Cut Tape & Digi-Reel) without affecting functional equivalence

The MCP2562T-H/MF meets all substitution criteria as a parametric equivalent, with the primary difference being packaging format rather than electrical or mechanical characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both MCP2561T-H/MF and MCP2562T-H/MF are active production parts from Microchip Technology with identical electrical and mechanical specifications. Selection between these parts should be based on packaging format requirements:

• MCP2561T-H/MF: Select when Tape & Reel packaging is required for automated assembly processes
• MCP2562T-H/MF: Select when Cut Tape or Digi-Reel packaging is preferred, or when higher inventory availability (4062 units) is a priority

Both parts carry ROHS3 compliance, MSL 1 rating, and REACH Unaffected status, making them suitable for equivalent use in CANbus interface applications across the specified operating temperature and voltage ranges.

Frequently Asked Questions (FAQ)

Q: Can MCP2562T-H/MF be used as a direct replacement for MCP2561T-H/MF?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, package type (8-VDFN Exposed Pad), and operating characteristics. The only difference is packaging format (Tape & Reel vs. Cut Tape & Digi-Reel).

Q: What determines if a part can substitute for the MCP2561T-H/MF?

A: Substitution requires matching: CANbus protocol, half-duplex 1/1 transceiver configuration, 8-DFN (3x3) surface mount package, 4.5V ~ 5.5V supply voltage, -40°C ~ 150°C operating temperature, 200 mV receiver hysteresis, and ROHS3 compliance.

Q: Does packaging format affect electrical performance?

A: No. Tape & Reel and Cut Tape & Digi-Reel packaging formats contain identical die and electrical characteristics. Format selection is based on assembly process requirements and inventory management.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both MCP2561T-H/MF and MCP2562T-H/MF operate across -40°C ~ 150°C, supporting extended temperature range applications.

Q: What is the significance of MSL 1 rating?

A: MSL 1 (Unlimited) indicates these parts have unlimited shelf life and do not require special moisture control during storage or handling, simplifying inventory management.