MCP2510T-I/ST CANbus Controller Equivalent & Substitute Parts

Part Overview

The MCP2510T-I/ST is an active CANbus Controller IC with SPI interface, manufactured by Microchip Technology. This 20-TSSOP packaged device implements CAN 2.0 protocol functionality and operates across industrial temperature ranges. The part is in active production status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified based on matching electrical specifications, protocol standards, and mechanical packaging requirements to ensure functional equivalence in system integration.

Substiute Parts

MCP2510T-I/ST

Microchip TechnologyIn Stock: 2309MCP2510T-I/ST Datasheet

Current PartRFQ

MCP2510-I/ST

Microchip TechnologyIn Stock: 1562MCP2510-I/ST Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MCP2510T-I/ST is determined by strict equivalence across the following critical parameters:

• CANbus protocol implementation (CAN 2.0 standard)
• SPI serial interface compatibility
• Controller function classification
• Voltage supply range (3V ~ 5.5V)
• Current consumption specification (10mA)
• Operating temperature range (-40°C ~ 85°C)
• Physical package type (20-TSSOP with 0.173" / 4.40mm width)
• RoHS3 compliance status
• Moisture sensitivity level (MSL 1)

The MCP2510-I/ST qualifies as a direct substitute based on identical electrical characteristics, protocol support, and mechanical compatibility. The only difference is packaging format (Tube versus Tape & Reel), which does not affect functional or electrical equivalence.

Parameter Comparison

Engineering Selection Recommendations

Both the MCP2510T-I/ST and MCP2510-I/ST are active production parts from Microchip Technology with identical electrical and functional specifications. Selection between these parts is determined by procurement and assembly requirements rather than technical performance:

• MCP2510T-I/ST: Tape & Reel packaging suitable for automated pick-and-place assembly operations
• MCP2510-I/ST: Tube packaging suitable for manual assembly or lower-volume applications

Both parts maintain full RoHS3 compliance and REACH unaffected status, ensuring regulatory compliance across industrial and commercial applications. The MSL 1 rating indicates unlimited shelf life under standard storage conditions.

Frequently Asked Questions (FAQ)

Q: Are MCP2510T-I/ST and MCP2510-I/ST electrically identical?

A: Yes. Both parts implement identical CANbus Controller functionality with CAN 2.0 protocol support, SPI interface, and matching electrical specifications across voltage supply, current consumption, and operating temperature ranges.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. MCP2510T-I/ST uses Tape & Reel (TR) packaging for automated assembly, while MCP2510-I/ST uses Tube packaging for manual or lower-volume assembly processes. Electrical and functional performance are equivalent.

Q: Can I substitute MCP2510-I/ST for MCP2510T-I/ST in my design?

A: Yes, from an electrical and functional standpoint. The substitution is valid for circuit design and performance. Verify that your assembly process can accommodate the Tube packaging format.

Q: Are both parts RoHS3 compliant?

A: Yes. Both MCP2510T-I/ST and MCP2510-I/ST are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.

Q: What does MSL 1 (Unlimited) mean for storage?

A: MSL 1 indicates the part has unlimited shelf life under standard storage conditions (typically 23°C ± 2°C and 45% to 75% relative humidity). No special moisture control or baking procedures are required before assembly.

Q: Can these parts operate in industrial temperature environments?

A: Yes. Both parts are rated for -40°C to 85°C operating temperature range, suitable for industrial applications including automotive and harsh environment deployments.