MCP2510T-E/SO CAN Controller Equivalent & Substitute Parts

Part Overview

The MCP2510T-E/SO is a CANbus Controller IC with SPI interface manufactured by Microchip Technology. This 18-SOIC package device implements CAN 2.0 protocol standards and operates within a 4.5V to 5.5V supply voltage range. The part is currently in active production status with 851 units available in new original inventory. Substitute parts are identified when equivalent electrical specifications, mechanical packaging, and compliance certifications align with the main part number, enabling direct replacement in system designs.

Substiute Parts

MCP2510T-E/SO

Microchip TechnologyIn Stock: 886MCP2510T-E/SO Datasheet

Current PartRFQ

MCP2510-E/SO

Microchip TechnologyIn Stock: 2259MCP2510-E/SO Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MCP2510T-E/SO is determined by strict alignment of the following electrical and mechanical parameters:

• Protocol Compatibility: CANbus protocol implementation
• Function Type: Controller function classification
• Interface Standard: SPI serial interface
• CAN Standard: CAN 2.0 specification compliance
• Supply Voltage Range: 4.5V to 5.5V operation
• Supply Current: 10mA maximum
• Operating Temperature Range: -40°C to 125°C
• Package Type: 18-SOIC form factor with 0.295" (7.50mm) width
• Compliance: ROHS3 and REACH status alignment

The MCP2510-E/SO meets all substitution criteria as a direct equivalent part from the same manufacturer, maintaining identical electrical specifications and mechanical packaging requirements.

Parameter Comparison

Engineering Selection Recommendations

Both MCP2510T-E/SO and MCP2510-E/SO are active production parts from Microchip Technology with identical electrical and thermal specifications. Selection between these parts is determined by packaging format requirements. The MCP2510T-E/SO is supplied in Tape & Reel format, suitable for automated assembly processes. The MCP2510-E/SO is supplied in Tube packaging, appropriate for manual handling and lower-volume applications. Both parts maintain ROHS3 compliance and REACH unaffected status, meeting current environmental and regulatory requirements. Inventory availability should be evaluated based on project timeline and volume requirements.

Frequently Asked Questions (FAQ)

Q: Can MCP2510-E/SO replace MCP2510T-E/SO in existing designs?

A: Yes. Both parts implement identical CANbus Controller functionality with CAN 2.0 protocol support, SPI interface, and 18-SOIC packaging. Electrical specifications, operating temperature range, and supply voltage requirements are equivalent.

Q: What is the difference between these part numbers?

A: The primary difference is packaging format. MCP2510T-E/SO uses Tape & Reel packaging for automated pick-and-place assembly. MCP2510-E/SO uses Tube packaging for manual component handling. All electrical and mechanical specifications remain identical.

Q: Are both parts RoHS compliant?

A: Yes. Both MCP2510T-E/SO and MCP2510-E/SO are ROHS3 compliant and REACH unaffected, meeting current environmental regulations.

Q: What is the operating temperature range for these controllers?

A: Both parts operate across -40°C to 125°C, supporting extended temperature industrial applications.

Q: Can these parts be used interchangeably in PCB designs?

A: Yes. Both parts use identical 18-SOIC package dimensions (0.295" width, 7.50mm). PCB footprints and solder pad layouts are compatible for direct substitution.

Q: What supply voltage do these CAN controllers require?

A: Both parts require 4.5V to 5.5V supply voltage with 10mA maximum supply current.