MCH6124-TL-E Equivalent & Substitute Parts

Part Overview

The MCH6124-TL-E is a PNP bipolar junction transistor manufactured by onsemi, designed for surface mount applications in the 6-MCPH package. This device operates at a maximum collector current of 3 A with a collector-emitter breakdown voltage of 20 V and a maximum power dissipation of 1 W. The MCH6124-TL-E is classified as an obsolete product, necessitating identification of functionally equivalent alternatives for ongoing design support and component procurement.

Key Parameters

Parameter	Value
Transistor Type	PNP
Current - Collector (Ic) (Max)	3 A
Voltage - Collector Emitter Breakdown (Max)	20 V
Power - Max	1 W
Frequency - Transition	400 MHz
DC Current Gain (hFE) (Min)	200 @ 100mA, 2V
Mounting Type	Surface Mount
Operating Temperature (Max)	150°C (TJ)
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the MCH6124-TL-E is determined by the following electrical and mechanical parameters:

Electrical Compatibility Criteria:

Transistor type must be PNP
Collector current rating must be equal to or greater than 3 A
Collector-emitter breakdown voltage must be equal to or greater than 20 V
Maximum power dissipation must be equal to or greater than 1 W
DC current gain (hFE) must meet or exceed 200 at specified test conditions
Operating temperature range must support maximum junction temperature of 150°C

Mechanical Compatibility Criteria:

Mounting type must be surface mount
Package must accommodate the same PCB footprint or be compatible with existing design constraints

The NJT4030PT1G meets these substitution criteria with enhanced electrical ratings and active product status.

Parameter Comparison

Parameter	MCH6124-TL-E	NJT4030PT1G	Compatibility
Transistor Type	PNP	PNP	Match
Current - Collector (Ic) (Max)	3 A	3 A	Match
Voltage - Collector Emitter Breakdown (Max)	20 V	40 V	Substitute exceeds requirement
Power - Max	1 W	2 W	Substitute exceeds requirement
Frequency - Transition	400 MHz	160 MHz	Substitute lower frequency
DC Current Gain (hFE) (Min)	200 @ 100mA, 2V	200 @ 1A, 1V	Match at different test conditions
Operating Temperature (Max)	150°C (TJ)	150°C (TJ)	Match
Mounting Type	Surface Mount	Surface Mount	Match
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	Match
Package / Case	6-SMD, Flat Leads (6-MCPH)	TO-261-4, TO-261AA (SOT-223)	Different package
Product Status	Obsolete	Active	Substitute is active
REACH Status	REACH Unaffected	REACH Unaffected	Match

Engineering Selection Recommendations

The NJT4030PT1G serves as a functional substitute for the obsolete MCH6124-TL-E based on the following factors:

Electrical Suitability: The NJT4030PT1G provides equivalent or superior electrical performance across all critical parameters. The collector current rating of 3 A matches the original specification, while the collector-emitter breakdown voltage of 40 V exceeds the 20 V requirement, providing additional design margin. The power dissipation rating of 2 W exceeds the 1 W requirement of the MCH6124-TL-E. The DC current gain of 200 is maintained at different test conditions but remains functionally equivalent for circuit operation.

Product Status and Availability: The NJT4030PT1G is classified as an active product with 35,100 units in stock, ensuring long-term availability and supply chain continuity. The MCH6124-TL-E is obsolete with limited remaining inventory.

Compliance and Regulatory Status: Both devices maintain REACH Unaffected status and carry identical ECCN and HTSUS classifications, ensuring regulatory compliance equivalence.

Package Consideration: The NJT4030PT1G uses a SOT-223 (TO-261) package, which differs from the 6-MCPH package of the MCH6124-TL-E. PCB layout modifications are required to accommodate this package change.

Frequently Asked Questions (FAQ)

Q: Can the NJT4030PT1G directly replace the MCH6124-TL-E without circuit modifications?

A: The NJT4030PT1G is electrically compatible with the MCH6124-TL-E for applications requiring PNP transistor functionality at 3 A collector current and 20 V breakdown voltage. However, the different package (SOT-223 versus 6-MCPH) requires PCB layout changes. No circuit modifications are necessary if the PCB footprint is updated to accommodate the SOT-223 package.

Q: What is the significance of the lower transition frequency in the NJT4030PT1G?

A: The NJT4030PT1G has a transition frequency of 160 MHz compared to the MCH6124-TL-E at 400 MHz. For applications operating below 160 MHz, this difference is not significant. Applications requiring switching speeds above 160 MHz may experience performance differences and require evaluation.

Q: Are there any thermal considerations when substituting these devices?

A: Both devices support a maximum junction temperature of 150°C. The NJT4030PT1G has a higher power dissipation rating of 2 W versus 1 W for the MCH6124-TL-E, allowing greater thermal headroom in power-limited applications.

Q: What are the moisture sensitivity implications?

A: Both devices carry an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions. Storage and handling procedures are identical for both components.

Q: How do the saturation voltage characteristics compare?

A: The MCH6124-TL-E specifies Vce saturation of 195 mV at 75 mA base current and 1.5 A collector current. The NJT4030PT1G specifies 500 mV at 300 mA base current and 3 A collector current. These measurements occur at different test conditions and reflect the different package and die designs. Circuit performance depends on specific application requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message