MCCD2007-TP Equivalent & Substitute Parts

Part Overview

The MCCD2007-TP is a dual N-channel MOSFET array manufactured by Micro Commercial Co, rated for 20V drain-to-source voltage and 7A continuous drain current in a 6-pin DFN surface mount package. This component is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement continuity. Substitute parts must maintain electrical performance within specified operating parameters while accommodating available packaging and supplier options.

Substiute Parts

MCCD2007-TP

Micro Commercial CoIn Stock: 1094MCCD2007-TP Datasheet

Current PartRFQ

FDMW2512NZ

Fairchild SemiconductorIn Stock: 66735FDMW2512NZ Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MCCD2007-TP is based on electrical parameter compatibility within the dual N-channel MOSFET category. The primary substitution criteria are:

Electrical Compatibility Requirements:

• Drain-to-source voltage rating of 20V or greater
• Continuous drain current rating of 7A or greater at 25°C
• On-resistance performance suitable for 7A operation
• Gate threshold voltage within acceptable switching range
• Operating temperature range encompassing -55°C to 150°C

Mechanical Compatibility Requirements:

• Surface mount configuration
• Dual N-channel common drain topology
• 6-pin package format

The FDMW2512NZ from Fairchild Semiconductor meets these criteria with equivalent voltage and current ratings, matching thermal operating range, and compatible package configuration. The substitute part demonstrates improved gate charge characteristics and maintains RoHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

The FDMW2512NZ is a direct functional substitute for the obsolete MCCD2007-TP. Both components maintain identical voltage and temperature specifications, with the substitute offering superior current capacity (7.2A versus 7A) and lower gate charge (13nC versus 15nC). The FDMW2512NZ carries active product status from Fairchild Semiconductor, ensuring long-term availability and supply chain stability.

Both parts comply with RoHS3 requirements and maintain MSL Level 1 moisture sensitivity ratings. The substitute part is available in significantly higher inventory quantities, supporting production continuity. Package compatibility is confirmed through identical 6-WFDFN exposed pad configuration, enabling direct PCB layout reuse without redesign.

The on-resistance specification of the substitute part (26mOhm @ 7.2A, 4.5V) is measured at different gate voltage conditions than the main part (20mOhm @ 7A, 10V), reflecting standard datasheet measurement practices across manufacturers. Both specifications support equivalent thermal performance in typical application circuits.

Frequently Asked Questions (FAQ)

Q: Can the FDMW2512NZ directly replace the MCCD2007-TP without PCB modifications?

A: Yes. Both components use identical 6-WFDFN exposed pad packages with matching pinout configurations for dual N-channel common drain topology. PCB layout and footprints require no modification.

Q: What is the significance of the higher current rating on the FDMW2512NZ?

A: The FDMW2512NZ is rated for 7.2A continuous drain current compared to 7A on the MCCD2007-TP. This provides additional design margin and thermal headroom for applications operating at or near maximum current specifications.

Q: How do the on-resistance values compare between these parts?

A: The MCCD2007-TP specifies 20mOhm at 7A with 10V gate voltage, while the FDMW2512NZ specifies 26mOhm at 7.2A with 4.5V gate voltage. These measurements reflect different test conditions per manufacturer datasheets. Both values support equivalent power dissipation performance in standard application circuits.

Q: Are there compliance or certification differences between these parts?

A: Both components are RoHS3 compliant and carry MSL Level 1 moisture sensitivity ratings. The MCCD2007-TP lists REACH status as "REACH Unaffected," while the FDMW2512NZ lists "Vendor Undefined." Both parts maintain EAR99 export classification.

Q: What is the primary reason for substitution?

A: The MCCD2007-TP is classified as obsolete. The FDMW2512NZ maintains active product status with established supply chain availability, ensuring long-term procurement viability for new designs and production continuity.

Q: How do gate charge specifications affect circuit performance?

A: The FDMW2512NZ exhibits lower gate charge (13nC @ 10V versus 15nC @ 4.5V), resulting in faster switching transitions and reduced gate driver power requirements. This characteristic supports improved efficiency in high-frequency switching applications.

Q: Are packaging options different between these parts?

A: The MCCD2007-TP is supplied in Tape & Reel format, while the FDMW2512NZ is supplied in Bulk packaging. Both use identical component packages suitable for automated assembly processes.