MC22FF152F-TF Mica Capacitor Equivalent & Substitute Parts

Part Overview

The MC22FF152F-TF is a 1500 pF mica capacitor rated at 1 kV, manufactured by Cornell Dubilier Electronics (CDE) in the 2220 (5750 Metric) package. This component is active and suitable for RF applications requiring high Q characteristics and low loss performance. Alternative models may be required due to inventory availability, tolerance specifications, or application-specific performance requirements.

Substiute Parts

MC22FF152F-TF

Cornell Dubilier Electronics (CDE)In Stock: 885MC22FF152F-TF Datasheet

Current PartRFQ

MC22FF152J-F

Cornell Dubilier Electronics (CDE)In Stock: 4590MC22FF152J-F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MC22FF152F-TF is permitted with components meeting the following electrical and mechanical parameters:

Critical Parameters (Must Match):

• Capacitance: 1500 pF
• Voltage Rating: 1 kV minimum
• Dielectric Material: Mica
• Package / Case: 2220 (5750 Metric)
• Operating Temperature Range: -55°C ~ 125°C minimum
• Mounting Type: Surface Mount

Flexible Parameters (Allowed Variation):

• Tolerance: ±1% to ±5%

The tolerance parameter allows substitution of components with lower precision (higher tolerance values) when the application permits, as the primary electrical characteristics remain constant across the acceptable tolerance range.

Parameter Comparison

Engineering Selection Recommendations

MC22FF152F-TF is recommended when ±1% tolerance precision is required for circuit performance or when inventory availability of this specific variant is confirmed.

MC22FF152J-F serves as a direct substitute when tolerance of ±5% meets circuit design requirements. Both components are active products with ROHS3 compliance and identical electrical performance within the tolerance specification. Selection between these variants depends on application tolerance requirements; the ±5% tolerance variant provides broader inventory availability without compromising the electrical or mechanical characteristics required for RF applications in the 2220 package.

Frequently Asked Questions (FAQ)

Q: Can MC22FF152J-F replace MC22FF152F-TF in all applications? A: MC22FF152J-F is substitutable where the circuit design permits ±5% capacitance tolerance. If the design requires ±1% precision, only MC22FF152F-TF meets the specification.

Q: Are the physical dimensions identical between both parts? A: Yes. Both components are in the 2220 (5750 Metric) package with identical footprints: 0.224" L x 0.197" W (5.70mm x 5.00mm) and maximum seated height of 0.157" (4.00mm). Substitution does not require PCB layout changes.

Q: What is the operating temperature range for these components? A: Both MC22FF152F-TF and MC22FF152J-F operate from -55°C to 125°C, providing identical thermal performance across standard industrial applications.

Q: Do these capacitors meet environmental compliance standards? A: Yes. Both components are ROHS3 compliant, REACH unaffected, classified under ECCN EAR99, and carry HTSUS code 8532.29.0020.

Q: What is the primary difference between these substitute parts? A: The sole difference is capacitance tolerance: MC22FF152F-TF specifies ±1% while MC22FF152J-F specifies ±5%. All other electrical, mechanical, and regulatory characteristics are identical.