MC13192FCR2 Equivalent & Substitute Parts

Part Overview

The MC13192FCR2 is an RF transceiver IC designed for 802.15.4 wireless communication standards, specifically supporting Zigbee® 2.4GHz applications. This device functions as a TxRx Only module, handling radio frequency transmission and reception without integrated microcontroller functionality. The product is classified as Obsolete, making identification of compatible substitute components essential for ongoing system support and new design implementations.

Substiute Parts

MC13192FCR2

NXP USA Inc.In Stock: 2616MC13192FCR2 Datasheet

Current PartRFQ

AT86RF231-ZUR

Microchip TechnologyIn Stock: 3293AT86RF231-ZUR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute components for the MC13192FCR2 are identified based on the following critical parameters that determine functional compatibility:

• RF Standard Compliance: 802.15.4 and General ISM > 1GHz support
• Frequency Band: 2.4GHz operation
• Protocol Support: Zigbee® capability
• Package Compatibility: 32-VFQFN Exposed Pad form factor
• Mounting Technology: Surface Mount
• Regulatory Compliance: ROHS3 and REACH status

The AT86RF231-ZUR qualifies as a substitute based on matching these core parameters. However, this substitute introduces functional differences in device architecture (TxRx + MCU versus TxRx Only) and performance characteristics that must be evaluated for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The AT86RF231-ZUR is available as an Active product from Microchip Technology, providing continuity for applications requiring 802.15.4 and Zigbee® 2.4GHz RF transceiver functionality. Both components maintain ROHS3 compliance and REACH Unaffected status, satisfying regulatory requirements for current manufacturing standards.

Selection between these components depends on system architecture requirements. The MC13192FCR2 operates as a TxRx Only device, requiring external microcontroller integration. The AT86RF231-ZUR integrates both transceiver and microcontroller functionality, which may alter system-level design considerations including PCB layout, firmware architecture, and component count.

Performance differences exist in current consumption, data rate capability, and receiver sensitivity. The AT86RF231-ZUR demonstrates lower current draw during receive and transmit operations, higher maximum data rate, and improved receiver sensitivity. These characteristics may provide advantages in power-constrained or high-throughput applications.

Frequently Asked Questions (FAQ)

Q: Can the AT86RF231-ZUR directly replace the MC13192FCR2 in existing designs?

A: Physical package compatibility exists (both use 32-VFQFN Exposed Pad), and both support 802.15.4 and Zigbee® 2.4GHz standards. However, the AT86RF231-ZUR includes integrated MCU functionality while the MC13192FCR2 is TxRx Only. System-level design changes may be required depending on the original architecture and whether external microcontroller integration is present.

Q: What are the key electrical differences between these components?

A: The AT86RF231-ZUR operates at lower supply voltage minimum (1.8V versus 2V), draws significantly less current during receive and transmit operations, supports higher maximum data rate (2Mbps versus 250kbps), and provides improved receiver sensitivity (-101dBm versus -92dBm). Output power differs by 1dBm (3dBm versus 4dBm).

Q: Are both components suitable for new designs?

A: The MC13192FCR2 is classified as Obsolete and is not recommended for new designs. The AT86RF231-ZUR maintains Active product status and is suitable for new development requiring 802.15.4 and Zigbee® 2.4GHz RF transceiver functionality.

Q: Do both components support the same wireless protocols?

A: The MC13192FCR2 supports Zigbee® protocol. The AT86RF231-ZUR supports 6LoWPAN, WirelessHART™, and Zigbee® protocols, providing broader protocol compatibility.

Q: What is the impact of integrated MCU functionality in the AT86RF231-ZUR?

A: The integrated MCU in the AT86RF231-ZUR eliminates the requirement for a separate microcontroller in certain applications, potentially reducing component count and PCB area. This architectural difference requires evaluation against specific system requirements and existing firmware implementations.