Equivalent & Substitute Parts for MBRTA60045L (GeneSiC Semiconductor)

Part Overview

The MBRTA60045L from GeneSiC Semiconductor is a Schottky diode array, featuring a 1 pair common cathode configuration, rated for 45 V DC reverse voltage and 300 A average rectified current per diode. It is designed for chassis mount applications using the Three Tower package. The product status is Obsolete. Alternative model identification is necessary to maintain design continuity, supply chain availability, and to support systems where direct replacements are required due to end-of-life (EOL) status.

Substiute Parts

MBRTA60045L

GeneSiC SemiconductorIn Stock: 997MBRTA60045L Datasheet

Current PartRFQ

MBRT30045

GeneSiC SemiconductorIn Stock: 1099MBRT30045 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MBRTA60045L is determined by matching the following key parameters:

• Category (Diodes, Rectifiers)
• Diode Configuration (1 Pair Common Cathode)
• Technology (Schottky)
• Voltage - DC Reverse (Vr) (Max) (45 V)
• Operating Temperature - Junction (-55°C ~ 150°C)
• Mounting Type (Chassis Mount)
• Package / Case (Three Tower)
• Supplier Device Package (Three Tower) Substitution within this group is strictly based on close matching of these criteria, ensuring electrical, mechanical, and thermal compatibility within the constraints provided.

Parameter Comparison

Engineering Selection Recommendations

The main part (MBRTA60045L) is Obsolete. The substitute (MBRT30045) is Active and RoHS Compliant. Both products share the same mounting, package type, and configuration. Selection for replacement is justified based on current product status and the provided compliance information.

Frequently Asked Questions (FAQ)

Q1: What parameters are critical when considering a substitute for MBRTA60045L?
A1: Substitute parts must share category, diode configuration, technology, reverse voltage rating, operating temperature range, mounting type, and package/case type.

Q2: Is the MBRT30045 compatible in terms of mechanical and electrical interface?
A2: Both MBRTA60045L and MBRT30045 use the Three Tower package, share chassis mount form factor, and employ a 1 pair common cathode Schottky diode configuration.

Q3: Are there differences in current rating or voltage drop between the original and substitute parts?
A3: MBRTA60045L is rated for 300 A average rectified current per diode, while MBRT30045 is rated for 150 A. The forward voltage differs, with MBRTA60045L at 600 mV @ 300 A and MBRT30045 at 750 mV @ 150 A.

Q4: Are the substitute and original parts compliant with current environmental standards?
A4: MBRT30045 is RoHS Compliant. Moisture Sensitivity Level (MSL) for both parts is 1 (Unlimited).

Q5: What packaging and mounting considerations should be accounted for?
A5: Both diodes utilize the Three Tower package and are intended for chassis mounting, ensuring physical interchangeability.