MBRM560-13-F Equivalent & Substitute Parts

Part Overview

The MBRM560-13-F is a Schottky rectifier diode manufactured by Diodes Incorporated, rated for 60 V DC reverse voltage and 5 A average rectified current in a Powermite®3 surface mount package. This component is classified as obsolete, necessitating identification of active equivalent and substitute parts for new designs and ongoing production requirements. Equivalent parts maintain identical electrical specifications, while substitute parts offer compatible performance within defined parameter ranges suitable for the application.

Substiute Parts

MBRM560-13-F

Diodes IncorporatedIn Stock: 1705MBRM560-13-F Datasheet

Current PartRFQ

PDS560-13

Diodes IncorporatedIn Stock: 155178PDS560-13 Datasheet

MFR RecommendedRFQ

UPS5100E3/TR13

Microchip TechnologyIn Stock: 17655UPS5100E3/TR13 Datasheet

MFR RecommendedRFQ

UPS560E3/TR13

Microchip TechnologyIn Stock: 59430UPS560E3/TR13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MBRM560-13-F is determined by the following critical parameters:

Parametric Equivalents maintain identical electrical specifications across voltage rating (60 V), current rating (5 A), forward voltage drop (690 mV @ 5 A), reverse leakage current (200 µA @ 60 V), and recovery speed (≤ 500ns). These parts are interchangeable in applications where the original Powermite®3 package footprint is compatible with the substitute package.

Functional Substitutes provide equivalent performance within the same voltage and current class but may differ in package type, forward voltage characteristics, or reverse leakage specifications. These parts are suitable when package footprint differences are accommodated through board redesign or when the application tolerates minor variations in electrical performance.

Higher Voltage Rated Substitutes (100 V rating) are suitable for applications where the original 60 V specification provides design margin, allowing use of components with higher voltage ratings without functional degradation.

Parameter Comparison

Engineering Selection Recommendations

UPS560E3/TR13 (Microchip Technology) is the primary parametric equivalent for MBRM560-13-F. This part maintains identical electrical specifications including 60 V reverse voltage, 5 A current rating, 690 mV forward voltage drop, and 200 µA reverse leakage current. The component is housed in the same Powermite®3 package, enabling direct footprint compatibility. Product status is active with ROHS3 compliance and REACH unaffected status, supporting long-term supply chain stability.

PDS560-13 (Diodes Incorporated) is a manufacturer-recommended substitute offering 60 V / 5 A performance in the PowerDI™ 5 package. This part exhibits improved forward voltage characteristics (670 mV @ 5 A versus 690 mV) and reduced reverse leakage current (150 µA @ 60 V versus 200 µA). Extended operating temperature range (-65°C ~ 150°C) and active product status support applications requiring enhanced thermal performance. Package footprint differs from the original Powermite®3, requiring board layout modification.

UPS5100E3/TR13 (Microchip Technology) is a functional substitute rated for 100 V reverse voltage with 5 A current capacity in the Powermite®3 package. This part is suitable for applications where the original 60 V specification provides design margin. Forward voltage drop increases to 810 mV @ 5 A, and reverse leakage current remains at 200 µA @ 100 V. Active product status and ROHS3 compliance support production use.

All substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing and storage practices.

Frequently Asked Questions (FAQ)

Q: Can UPS560E3/TR13 replace MBRM560-13-F directly on the PCB?

A: Yes. UPS560E3/TR13 is a parametric equivalent housed in the identical Powermite®3 package with matching electrical specifications (60 V, 5 A, 690 mV forward voltage, 200 µA reverse leakage). Direct footprint substitution is supported without board redesign.

Q: What is the difference between PDS560-13 and MBRM560-13-F?

A: PDS560-13 differs in package type (PowerDI™ 5 versus Powermite®3), forward voltage (670 mV versus 690 mV @ 5 A), reverse leakage current (150 µA versus 200 µA @ 60 V), and operating temperature range (-65°C ~ 150°C versus -55°C ~ 125°C). Electrical performance is equivalent for 60 V / 5 A applications. Board layout modification is required due to package footprint differences.

Q: When should UPS5100E3/TR13 be used instead of a 60 V equivalent?

A: UPS5100E3/TR13 is selected for applications where the circuit operates at voltages below 100 V and design margin for voltage transients or overvoltage conditions is required. The higher voltage rating provides additional safety margin. Forward voltage drop increases to 810 mV @ 5 A, which may affect efficiency in low-voltage applications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. MBRM560-13-F, UPS560E3/TR13, PDS560-13, and UPS5100E3/TR13 are all ROHS3 compliant, supporting use in applications requiring RoHS compliance.

Q: What is the impact of REACH status differences?

A: MBRM560-13-F is REACH Affected, while UPS560E3/TR13, PDS560-13, and UPS5100E3/TR13 are REACH Unaffected. For applications subject to REACH regulations, the unaffected substitute parts provide simplified compliance documentation and supply chain management.

Q: Do all parts have the same moisture sensitivity level?

A: Yes. All parts including MBRM560-13-F and its substitutes are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling.

Q: Can PDS560-13 be used in high-temperature applications?

A: PDS560-13 supports extended operating temperature range (-65°C ~ 150°C) compared to MBRM560-13-F (-55°C ~ 125°C), making it suitable for applications requiring operation at elevated junction temperatures up to 150°C.