MBRH15035L Equivalent & Substitute Parts Reference

Part Overview

The MBRH15035L, produced by GeneSiC Semiconductor, is a Schottky rectifier diode rated for 35 V reverse voltage and 150 A average rectified current, packaged in a D-67 chassis mount case. This product is classified as obsolete, necessitating the need for compatible substitute parts in existing and future designs to maintain functionality, sourcing continuity, and inventory assurance.

Substiute Parts

MBRH15035L

GeneSiC SemiconductorIn Stock: 1123MBRH15035L Datasheet

Current PartRFQ

180NQ035-1

SMC Diode SolutionsIn Stock: 833180NQ035-1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are determined strictly by matching the following key parameters: Schottky technology, reverse voltage rating, forward voltage at rated current, average rectified current, fast recovery speed, reverse leakage current, mounting type, and mechanical package class. Only components that meet or exceed these parameters while maintaining compliance with the original device's chassis mount and industrial-grade characteristics are listed as equivalents.

Parameter Comparison

Engineering Selection Recommendations

The main part MBRH15035L is obsolete. Substitution with 180NQ035-1 is technically supported based on matching key electrical ratings, Schottky technology, fast recovery speed, and chassis mount configuration. The substitute part 180NQ035-1 is listed as ROHS3 Compliant and REACH Affected, with a product status of active, making it suitable where current active lifecycle and compliance with environmental regulations are necessary. Only documented compliance or regulatory information provided is considered.

Frequently Asked Questions (FAQ)

Q1: What are the essential electrical parameters for substituting MBRH15035L?
A1: The key electrical parameters are reverse voltage (35 V), average rectified current (minimum 150A), forward voltage drop (600 mV at rated current), and Schottky technology.

Q2: Can the 180NQ035-1 be used in place of MBRH15035L in terms of package and mounting?
A2: Both parts are designed for chassis mount applications, but the package/case differs (D-67 vs HALF-PAK). Mechanical compatibility must be assessed relative to the provided package names.

Q3: Is there any difference in moisture sensitivity between these two parts?
A3: Both MBRH15035L and 180NQ035-1 have an MSL rating of 1 (Unlimited).

Q4: Does product status affect substitute selection?
A4: Yes, MBRH15035L is obsolete while 180NQ035-1 is active, making the latter suitable for new or maintenance designs if the technical parameters satisfy the circuit requirements.

Q5: Are compliance factors different between these parts?
A5: The substitute (180NQ035-1) is specified as ROHS3 Compliant and REACH Affected; MBRH15035L does not specify these statuses in the provided data.

Q6: What compatibility considerations arise from differences in reverse leakage current?
A6: MBRH15035L specifies 3 mA @ 35 V, while 180NQ035-1 specifies 15 mA @ 35 V. Both values should be reviewed for acceptability based on system requirements.