MBRF3060CT-Y Equivalent & Substitute Parts

Part Overview

The MBRF3060CT-Y is a Schottky diode array manufactured by Taiwan Semiconductor Corporation, configured as 1 pair common cathode with 60 V reverse voltage rating and 30 A average rectified current per diode. The device is packaged in TO-220-3 Full Pack with isolated tab for through-hole mounting applications. This part is Active status and ROHS3 compliant. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate multiple qualified suppliers.

Substiute Parts

MBRF3060CT-Y

Taiwan Semiconductor CorporationIn Stock: 803MBRF3060CT-Y Datasheet

Current PartRFQ

MBRF3060CT

SMC Diode SolutionsIn Stock: 2585MBRF3060CT Datasheet

DirectRFQ

MBRF3060CTP

SMC Diode SolutionsIn Stock: 1790MBRF3060CTP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MBRF3060CT-Y is determined by the following critical parameters:

Mandatory Matching Parameters:

• Diode Configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 60 V
• Mounting Type: Through Hole
• Package / Case: TO-220-3 Full Pack, Isolated Tab
• Supplier Device Package: ITO-220AB

Allowable Variation Parameters:

• Current - Average Rectified (Io) (per Diode): Substitute parts may have unspecified current ratings in provided documentation
• Voltage - Forward (Vf) (Max) @ If: Substitute parts may have different forward voltage specifications at different test currents
• Current - Reverse Leakage @ Vr: Substitute parts may have higher leakage current specifications
• RoHS and REACH Status: Compliance variations are acceptable

The identified substitute parts MBRF3060CT and MBRF3060CTP meet all mandatory matching parameters and are therefore electrically and mechanically compatible with the MBRF3060CT-Y for through-hole circuit board applications requiring 60 V Schottky diode arrays in TO-220-3 packaging.

Parameter Comparison

Engineering Selection Recommendations

MBRF3060CT (SMC Diode Solutions)

This substitute part is Active status and ROHS3 compliant. It matches all mandatory electrical and mechanical parameters with the MBRF3060CT-Y. The forward voltage specification is provided at 15 A test current rather than 30 A. Current inventory is 2567 pieces. This part is suitable for direct substitution in applications where the 60 V reverse voltage and TO-220-3 package requirements are specified.

MBRF3060CTP (SMC Diode Solutions)

This substitute part is Active status and ROHS3 compliant. It matches all mandatory electrical and mechanical parameters with the MBRF3060CT-Y. The forward voltage specification is provided at 15 A test current rather than 30 A. Current inventory is 1731 pieces. This part is suitable for direct substitution in applications where the 60 V reverse voltage and TO-220-3 package requirements are specified.

Both substitute parts are qualified alternatives based on matching diode configuration, Schottky technology, 60 V reverse voltage rating, through-hole mounting, and TO-220-3 ITO-220AB packaging. Selection between MBRF3060CT and MBRF3060CTP may be based on inventory availability and forward voltage characteristics at the application's operating current.

Frequently Asked Questions (FAQ)

Q: Can MBRF3060CT or MBRF3060CTP be used as direct replacements for MBRF3060CT-Y?

A: Yes. Both substitute parts share identical diode configuration (1 Pair Common Cathode), Schottky technology, 60 V reverse voltage rating, through-hole mounting type, and TO-220-3 Full Pack isolated tab packaging. They are electrically and mechanically compatible for circuit board applications.

Q: What are the differences in forward voltage between the main part and substitutes?

A: The MBRF3060CT-Y specifies 950 mV maximum forward voltage at 30 A. The MBRF3060CT specifies 700 mV maximum at 15 A, and the MBRF3060CTP specifies 770 mV maximum at 15 A. Forward voltage specifications are provided at different test currents. Application-specific thermal and electrical performance analysis is required when forward voltage characteristics differ.

Q: Why do the substitute parts not specify current ratings?

A: The provided technical documentation for MBRF3060CT and MBRF3060CTP does not include average rectified current specifications. Both parts are qualified substitutes based on matching all other mandatory parameters including voltage rating, package type, and diode configuration.

Q: Are all three parts pin-compatible?

A: Yes. All three parts use the TO-220-3 Full Pack isolated tab package with ITO-220AB supplier device package designation. Pin configuration and mechanical footprint are identical for through-hole circuit board mounting.

Q: What is the difference between reverse leakage current specifications?

A: The MBRF3060CT-Y specifies 200 µA maximum reverse leakage at 60 V. Both substitute parts specify 1 mA maximum reverse leakage at 60 V. Higher reverse leakage may affect circuit performance in applications sensitive to leakage current.

Q: Are all parts RoHS compliant?

A: Yes. The MBRF3060CT-Y, MBRF3060CT, and MBRF3060CTP are all ROHS3 compliant. All three parts are suitable for applications requiring RoHS compliance.

Q: What is the operating temperature range for these parts?

A: All three parts operate across a junction temperature range of -55°C to 150°C, providing identical thermal operating specifications.