MBRF3060CT Equivalent & Substitute Parts

Part Overview

The MBRF3060CT is a Schottky diode array in a 1 Pair Common Cathode configuration rated for 60 V DC reverse voltage and 30 A average rectified current per diode. Manufactured by Taiwan Semiconductor Corporation, this component is packaged in a TO-220-3 Full Pack with isolated tab for through-hole mounting applications. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating.

Substitute parts are identified to address inventory availability, regional sourcing requirements, or specific application constraints while maintaining electrical and mechanical compatibility within the TO-220-3 package family.

Substiute Parts

MBRF3060CT

Taiwan Semiconductor CorporationIn Stock: 2583MBRF3060CT Datasheet

Current PartRFQ

MBRF3060CT

SMC Diode SolutionsIn Stock: 2585MBRF3060CT Datasheet

DirectRFQ

MBRF3060CTP

SMC Diode SolutionsIn Stock: 1790MBRF3060CTP Datasheet

DirectRFQ

MBRF1560CT-E3/45

Vishay General Semiconductor - Diodes DivisionIn Stock: 1403MBRF1560CT-E3/45 Datasheet

SimilarRFQ

VFT3060C-E3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 16598VFT3060C-E3/4W Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Diode Configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 60 V
• Mounting Type: Through Hole
• Package / Case: TO-220-3 Full Pack, Isolated Tab
• Supplier Device Package: ITO-220AB

Allowable Variation Parameters:

• Current - Average Rectified (Io) (per Diode): Equal to or greater than 30 A
• Voltage - Forward (Vf) (Max) @ If: Within acceptable forward voltage range for Schottky technology
• Current - Reverse Leakage @ Vr: Within acceptable leakage specifications
• Operating Temperature - Junction: Equal to or exceeding -55°C to 150°C range
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parts are classified as Direct equivalents when all parameters match the main part specification. Parts are classified as Similar when current rating or forward voltage characteristics differ but remain within acceptable substitution criteria for the TO-220-3 Schottky diode array category.

Parameter Comparison

Engineering Selection Recommendations

MBRF3060CT (SMC Diode Solutions) and MBRF3060CTP (SMC Diode Solutions) are direct part number equivalents to the main MBRF3060CT manufactured by Taiwan Semiconductor Corporation. Both maintain identical package specifications, diode configuration, and voltage ratings. Selection between these direct equivalents is based on inventory availability and regional sourcing preferences. Both are ROHS3 compliant with unlimited moisture sensitivity rating.

VFT3060C-E3/4W (Vishay General Semiconductor - Diodes Division) is a similar substitute rated for 15 A average rectified current per diode. This part maintains the 60 V reverse voltage rating, identical package configuration, and fast recovery Schottky technology. The VFT3060C-E3/4W is suitable for applications where the 30 A rating of the main part exceeds system requirements. This part is ROHS3 compliant and carries REACH Unaffected status.

MBRF1560CT-E3/45 (Vishay General Semiconductor - Diodes Division) is a similar substitute rated for 7.5 A average rectified current per diode. This part maintains the 60 V reverse voltage rating and identical package configuration. The MBRF1560CT-E3/45 extends the operating temperature range to -65°C, providing enhanced low-temperature performance. This part is ROHS3 compliant and carries REACH Unaffected status.

All substitute parts maintain Active product status and are available in production quantities. Selection should be based on current rating requirements, temperature range specifications, and inventory availability for the intended application.

Frequently Asked Questions (FAQ)

Q: Can MBRF3060CT be replaced with MBRF3060CT from SMC Diode Solutions?

A: Yes. Both parts share identical part numbers and specifications. The SMC Diode Solutions version maintains the same 60 V reverse voltage rating, 1 Pair Common Cathode configuration, TO-220-3 Full Pack isolated tab package, and ROHS3 compliance. Selection between manufacturers is based on inventory availability and sourcing requirements.

Q: What is the difference between MBRF3060CTP and MBRF3060CT from SMC Diode Solutions?

A: Both parts are manufactured by SMC Diode Solutions with identical electrical specifications and package configurations. The primary difference is the forward voltage characteristic: MBRF3060CT specifies 700 mV @ 15 A, while MBRF3060CTP specifies 770 mV @ 15 A. Both are suitable direct substitutes for the main MBRF3060CT.

Q: Can VFT3060C-E3/4W replace MBRF3060CT in all applications?

A: VFT3060C-E3/4W is a similar substitute suitable for applications where the current requirement does not exceed 15 A per diode. The part maintains the 60 V reverse voltage rating and identical TO-220-3 package configuration. Applications requiring the full 30 A rating of the main part require the higher-current MBRF3060CT or equivalent.

Q: Is MBRF1560CT-E3/45 compatible with MBRF3060CT?

A: MBRF1560CT-E3/45 is a similar substitute with a reduced current rating of 7.5 A per diode. The part maintains the 60 V reverse voltage rating and identical TO-220-3 package configuration. This part is suitable only for applications where the current requirement does not exceed 7.5 A per diode. The extended temperature range to -65°C provides enhanced low-temperature performance.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), matching the environmental and regulatory requirements of the main MBRF3060CT.

Q: What is the significance of the isolated tab in the TO-220-3 Full Pack?

A: The isolated tab configuration in the TO-220-3 Full Pack allows the mounting tab to be electrically isolated from the diode array, enabling flexible thermal management and circuit design without electrical interference. All listed parts maintain this isolated tab specification.

Q: Can substitute parts be used interchangeably in existing PCB designs?

A: Yes. All substitute parts maintain identical TO-220-3 Full Pack, Isolated Tab package specifications and through-hole mounting configuration. Direct pin-to-pin compatibility is maintained across all listed substitutes, allowing board-level interchangeability without design modification.

Q: What is the difference in reverse leakage current between the main part and substitutes?

A: The main MBRF3060CT specifies 200 µA @ 60 V reverse leakage. All SMC Diode Solutions and Vishay substitutes specify 1 mA @ 60 V or 1.2 mA @ 60 V. These differences reflect manufacturing variations within acceptable Schottky diode specifications and do not affect functional compatibility in standard rectification applications.