MBRF3060CT Equivalent & Substitute Parts

Part Overview

The MBRF3060CT is a Schottky diode array manufactured by Littelfuse Inc., configured as a 1 Pair Common Cathode rectifier with a 60 V DC reverse voltage rating and 15 A average rectified current per diode. The device is packaged in a TO-220-3 Full Pack with isolated tab for through-hole mounting applications. This component is classified as Active product status and is ROHS3 compliant.

Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and component availability across manufacturing environments. Substitutes maintain identical or compatible electrical and mechanical specifications within the defined parameter tolerances.

Substiute Parts

MBRF3060CT

Littelfuse Inc.In Stock: 2651MBRF3060CT Datasheet

Current PartRFQ

DSTF3060C

Littelfuse Inc.In Stock: 17700DSTF3060C Datasheet

Parametric EquivalentRFQ

VFT3060C-E3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 16598VFT3060C-E3/4W Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MBRF3060CT are qualified based on strict equivalence across the following critical parameters:

• Diode Configuration: 1 Pair Common Cathode (identical topology required for circuit compatibility)
• Technology: Schottky (fast recovery rectifier classification)
• Voltage - DC Reverse (Vr) (Max): 60 V (identical rating)
• Current - Average Rectified (Io) (per Diode): 15 A (identical current handling)
• Voltage - Forward (Vf) (Max) @ If: 700 mV @ 15 A (identical forward drop specification)
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io) (identical recovery time classification)
• Operating Temperature - Junction: -55°C to 150°C (identical thermal operating range)
• Mounting Type: Through Hole (identical mechanical interface)
• Package / Case: TO-220-3 Full Pack, Isolated Tab (identical physical form factor)
• Supplier Device Package: ITO-220AB (identical package designation)
• RoHS Status: ROHS3 Compliant (identical regulatory compliance)
• Moisture Sensitivity Level (MSL): 1 (Unlimited) (identical moisture handling classification)

Substitutes are permitted to vary in reverse leakage current within the specified operating condition, provided the variation does not exceed the documented maximum specification at the rated voltage and temperature.

Parameter Comparison

Engineering Selection Recommendations

All three components—MBRF3060CT, DSTF3060C, and VFT3060C-E3/4W—are qualified as direct substitutes based on electrical and mechanical parameter equivalence. Selection among these parts is determined by the following factors:

Manufacturer Availability: MBRF3060CT and DSTF3060C are both manufactured by Littelfuse Inc. VFT3060C-E3/4W is manufactured by Vishay General Semiconductor - Diodes Division and represents a cross-manufacturer equivalent.

Regulatory Compliance: All three parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with identical HTSUS code 8541.10.0080.

Reverse Leakage Specification: MBRF3060CT specifies 1 mA reverse leakage at 60 V. DSTF3060C and VFT3060C-E3/4W specify 1.2 mA reverse leakage at 60 V. Both values remain within acceptable operating parameters for Schottky rectifier applications.

Supply Chain Continuity: Component selection should prioritize availability and lead time. Current inventory levels are: MBRF3060CT (2,567 pcs), DSTF3060C (17,678 pcs), and VFT3060C-E3/4W (16,500 pcs).

Thermal and Electrical Performance: All three parts operate across the identical temperature range (-55°C to 150°C) and maintain equivalent forward voltage drop and recovery speed characteristics.

Frequently Asked Questions (FAQ)

Q: Can DSTF3060C be used as a direct replacement for MBRF3060CT in existing designs?

A: Yes. DSTF3060C is a parametric equivalent with identical voltage rating (60 V), current rating (15 A per diode), forward voltage drop (700 mV @ 15 A), and package configuration (TO-220-3 Full Pack, Isolated Tab). The reverse leakage specification differs by 0.2 mA (1.2 mA versus 1 mA), which remains within acceptable operating margins for Schottky rectifier applications.

Q: What is the difference between MBRF3060CT and VFT3060C-E3/4W?

A: Both parts are functionally equivalent across all critical electrical parameters: 60 V reverse voltage, 15 A average rectified current, 700 mV forward voltage drop, and fast recovery speed. The primary difference is manufacturer: MBRF3060CT is manufactured by Littelfuse Inc., while VFT3060C-E3/4W is manufactured by Vishay General Semiconductor - Diodes Division. Both are ROHS3 compliant and packaged in TO-220-3 Full Pack with isolated tab.

Q: Are there any thermal or operating temperature differences among these three parts?

A: No. All three parts operate across the identical junction temperature range of -55°C to 150°C and maintain equivalent thermal performance characteristics.

Q: Can these parts be used interchangeably in PCB designs without layout modifications?

A: Yes. All three parts use the identical TO-220-3 Full Pack with isolated tab package (ITO-220AB supplier designation), which ensures mechanical and electrical compatibility with existing through-hole mounting patterns and thermal management designs.

Q: What is the significance of the "1 Pair Common Cathode" configuration?

A: This configuration indicates the diode array contains two diodes with a shared cathode terminal. This topology is essential for specific circuit applications such as bridge rectifiers and synchronous switching circuits. Substitutes must maintain this identical configuration to ensure circuit functionality.

Q: Are moisture sensitivity considerations different among these parts?

A: No. All three parts are classified as Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture-related handling restrictions during storage, transport, or assembly.

Q: Which part should be selected for new designs?

A: Selection is based on supply chain factors, manufacturer preference, and availability. All three parts are Active status and fully qualified for new design implementation. DSTF3060C and VFT3060C-E3/4W currently have higher inventory levels (17,678 pcs and 16,500 pcs respectively) compared to MBRF3060CT (2,567 pcs).