MBRF2560CTHC0G Equivalent & Substitute Parts

Part Overview

The MBRF2560CTHC0G is a Schottky diode array manufactured by Taiwan Semiconductor Corporation, configured as 1 pair common cathode with 60 V reverse voltage rating and 25 A average rectified current per diode. The device is packaged in TO-220-3 Full Pack with isolated tab and is qualified to AEC-Q101 automotive standards. This part is active in production with 766 units in current inventory.

Substitute parts are identified for applications where the MBRF2560CTHC0G may be unavailable, discontinued, or where alternative electrical specifications within acceptable parameters are required for system design flexibility.

Substiute Parts

MBRF2560CTHC0G

Taiwan Semiconductor CorporationIn Stock: 791MBRF2560CTHC0G Datasheet

Current PartRFQ

MBRF1560CT-E3/45

Vishay General Semiconductor - Diodes DivisionIn Stock: 1403MBRF1560CT-E3/45 Datasheet

SimilarRFQ

VFT3060C-E3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 16598VFT3060C-E3/4W Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MBRF2560CTHC0G are qualified based on the following criteria:

Mandatory Matching Parameters:

• Diode Configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 60 V
• Mounting Type: Through Hole
• Package / Case: TO-220-3 Full Pack, Isolated Tab
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Variable Parameters (Allowed Substitution Range):

• Current - Average Rectified (Io) (per Diode): 7.5 A to 25 A
• Voltage - Forward (Vf) (Max) @ If: 700 mV to 750 mV
• Current - Reverse Leakage @ Vr: 1 mA to 2 mA @ 60 V
• Operating Temperature - Junction: -65°C to -55°C (minimum), 150°C (maximum)

The identified substitute parts MBRF1560CT-E3/45 and VFT3060C-E3/4W maintain all mandatory parameters while operating within acceptable ranges for current capacity and forward voltage characteristics.

Parameter Comparison

Engineering Selection Recommendations

MBRF2560CTHC0G (Primary Part)

The MBRF2560CTHC0G is the primary selection for applications requiring 25 A average rectified current per diode at 60 V reverse voltage. This part is active in production with established supply availability. The device carries AEC-Q101 automotive qualification, ROHS3 compliance, and unlimited moisture sensitivity rating, making it suitable for automotive and industrial applications.

MBRF1560CT-E3/45 (Lower Current Substitute)

The MBRF1560CT-E3/45 is a substitute for applications where current requirements do not exceed 7.5 A per diode. This part maintains identical voltage ratings, package configuration, and compliance certifications. The extended minimum operating temperature of -65°C provides additional thermal margin in cold-environment applications. This substitute is suitable only for designs where the 25 A current capacity of the primary part exceeds system requirements.

VFT3060C-E3/4W (Mid-Range Current Substitute)

The VFT3060C-E3/4W is a substitute for applications requiring 15 A average rectified current per diode. This part is designated as part of the TMBS® series and maintains all mandatory electrical and package specifications. The forward voltage of 700 mV at 15 A represents a 50 mV improvement over the primary part at equivalent current density. This substitute is suitable for designs where current requirements fall between 7.5 A and 25 A.

All substitute parts are active in production, ROHS3 compliant, and carry unlimited moisture sensitivity rating. Selection between primary and substitute parts is determined by application current requirements and thermal operating range specifications.

Frequently Asked Questions (FAQ)

Q: Can MBRF1560CT-E3/45 be used in place of MBRF2560CTHC0G?

A: MBRF1560CT-E3/45 is a substitute only for applications where the average rectified current per diode does not exceed 7.5 A. The primary part MBRF2560CTHC0G is rated for 25 A per diode. Using the lower-rated substitute in a 25 A application will result in device failure due to thermal stress and current overload.

Q: What is the difference between VFT3060C-E3/4W and MBRF2560CTHC0G?

A: Both parts share identical 60 V reverse voltage rating, TO-220-3 package configuration, and fast recovery Schottky technology. The primary differences are current capacity (15 A versus 25 A) and forward voltage (700 mV versus 750 mV). VFT3060C-E3/4W is suitable for applications requiring up to 15 A per diode.

Q: Are all three parts pin-compatible?

A: Yes. All three parts use the TO-220-3 Full Pack with isolated tab package configuration. Pin assignments for the 1 pair common cathode configuration are identical across all parts, enabling direct mechanical and electrical substitution within the specified current and voltage operating ranges.

Q: Do substitute parts carry the same automotive qualification?

A: The primary part MBRF2560CTHC0G carries AEC-Q101 automotive qualification. The substitute parts MBRF1560CT-E3/45 and VFT3060C-E3/4W are not specified with AEC-Q101 qualification in the provided data. Automotive applications requiring AEC-Q101 certification must use the primary part.

Q: What is the impact of forward voltage differences between parts?

A: Forward voltage differences of 50 mV (700 mV versus 750 mV) result in proportional changes to power dissipation and thermal performance. At 15 A, VFT3060C-E3/4W dissipates 10.5 W compared to 11.25 W for MBRF2560CTHC0G at 12.5 A. System thermal design must account for these differences.

Q: Can these parts be used in parallel to increase current capacity?

A: Parallel operation of these diode arrays is not addressed in the provided specifications. Current sharing characteristics and thermal management requirements for parallel configurations must be evaluated through detailed thermal and electrical analysis.

Q: What is the difference in reverse leakage current between parts?

A: MBRF2560CTHC0G exhibits 2 mA reverse leakage at 60 V, while MBRF1560CT-E3/45 and VFT3060C-E3/4W exhibit 1 mA and 1.2 mA respectively. Lower reverse leakage improves efficiency in low-current standby conditions and reduces thermal generation during reverse bias operation.

Q: Are all parts RoHS3 compliant?

A: Yes. All three parts are ROHS3 compliant with unlimited moisture sensitivity level (MSL 1), indicating no moisture-related handling restrictions during storage, transport, or assembly.