MBRF2060CT-JT Equivalent & Substitute Parts

Part Overview

The MBRF2060CT-JT is a Schottky diode array manufactured by Diodes Incorporated, configured as 1 pair common cathode with 60 V reverse voltage rating and 10 A average rectified current per diode. The device is packaged in TO-220-3 with isolated tab and is qualified to AEC-Q101 automotive standards. This part is currently listed as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement.

Substiute Parts

MBRF2060CT-JT

Diodes IncorporatedIn Stock: 945MBRF2060CT-JT Datasheet

Current PartRFQ

DSTF2060C

Littelfuse Inc.In Stock: 21152DSTF2060C Datasheet

MFR RecommendedRFQ

DSTF3060C

Littelfuse Inc.In Stock: 17700DSTF3060C Datasheet

MFR RecommendedRFQ

MBR1060FCT-BP

Micro Commercial CoIn Stock: 1067MBR1060FCT-BP Datasheet

MFR RecommendedRFQ

VFT1060C-E3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 1520VFT1060C-E3/4W Datasheet

MFR RecommendedRFQ

VFT1060C-M3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 871VFT1060C-M3/4W Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MBRF2060CT-JT is determined by the following critical parameters:

Primary Substitution Criteria:

• Diode configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 60 V minimum
• Mounting Type: Through Hole
• Package / Case: TO-220-3 with isolated tab
• Supplier Device Package: ITO-220AB

Secondary Compatibility Parameters:

• Current - Average Rectified (Io) (per Diode): 10 A or greater
• Operating Temperature - Junction: -55°C to 150°C or equivalent range
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)

Substitute parts are grouped into two categories based on current rating:

Category A - Direct Current Rating Match (10 A): Parts with 10 A average rectified current per diode maintain identical electrical performance for the primary application parameter.

Category B - Elevated Current Rating (15 A): Parts with higher current ratings provide enhanced thermal margin and current handling capability while maintaining all other critical parameters.

Category C - Reduced Current Rating (5 A): Parts with 5 A current rating are suitable only for applications where the circuit design accommodates the lower current specification.

Parameter Comparison

Engineering Selection Recommendations

DSTF2060C (Littelfuse Inc.) - Primary Substitute

The DSTF2060C is the recommended primary substitute for the MBRF2060CT-JT. Both parts share identical electrical specifications for voltage rating (60 V), current rating (10 A), diode configuration (1 pair common cathode), and package type (TO-220-3 ITO-220AB with isolated tab). The DSTF2060C is active product status with ROHS3 compliance and MSL 1 rating. Forward voltage is lower at 650 mV @ 10 A compared to 810 mV @ 10 A, resulting in reduced power dissipation. Reverse leakage is higher at 850 µA @ 60 V. The part is available in tube packaging with 21,116 units in stock.

DSTF3060C (Littelfuse Inc.) - Elevated Current Substitute

The DSTF3060C provides a higher current rating of 15 A per diode while maintaining the 60 V reverse voltage specification and identical package configuration. This part is suitable for applications where thermal margin or current headroom is required. Operating temperature range matches the original part at -55°C to 150°C. Reverse leakage increases to 1.2 mA @ 60 V. Active product status with ROHS3 compliance. Available in tube packaging with 17,678 units in stock.

MBR1060FCT-BP (Micro Commercial Co) - Alternative Substitute

The MBR1060FCT-BP matches the 10 A current rating and 60 V voltage specification with identical reverse leakage of 100 µA @ 60 V. Package configuration is TO-220-3 with isolated tab in ITO-220AB. Operating temperature range is -50°C to 150°C, which is 5°C narrower at the lower end compared to the original part. Speed specification differs (No Recovery Time > 500mA vs. Fast Recovery ≤ 500ns). Active product status. Available in bulk packaging with 1,018 units in stock.

VFT1060C-E3/4W and VFT1060C-M3/4W (Vishay General Semiconductor - Diodes Division) - Reduced Current Substitutes

Both VFT1060C variants are rated for 5 A average rectified current per diode, which is half the original specification. These parts are suitable only for applications where circuit design accommodates the lower current rating. Both maintain 60 V reverse voltage, TO-220-3 package with isolated tab, and fast recovery speed ≤ 500ns. Operating temperature range is -40°C to 150°C, narrower at the lower end by 15°C. Both are active product status with ROHS3 compliance and MSL 1 rating. Available in tube packaging with 1,446 units (E3/4W) and 780 units (M3/4W) in stock.

Frequently Asked Questions (FAQ)

Q: Can the DSTF2060C directly replace the MBRF2060CT-JT in all applications?

A: The DSTF2060C is electrically and mechanically compatible with the MBRF2060CT-JT. Both parts share identical voltage rating (60 V), current rating (10 A), diode configuration (1 pair common cathode), and package type (TO-220-3 ITO-220AB). The DSTF2060C has lower forward voltage (650 mV vs. 810 mV @ 10 A), which reduces power dissipation. Reverse leakage is higher (850 µA vs. 100 µA @ 60 V). These differences are within normal design tolerances for Schottky diode arrays.

Q: What is the difference between the DSTF2060C and DSTF3060C?

A: The primary difference is current rating. The DSTF2060C is rated for 10 A average rectified current per diode, matching the original MBRF2060CT-JT specification. The DSTF3060C is rated for 15 A per diode, providing 50% higher current capacity. Both maintain 60 V reverse voltage and identical package configuration. The DSTF3060C is suitable for applications requiring higher current handling or improved thermal margin.

Q: Why are the VFT1060C variants listed as substitutes if they have only 5 A rating?

A: The VFT1060C-E3/4W and VFT1060C-M3/4W are listed as available alternatives based on the provided substitute list. However, the 5 A current rating is half the original 10 A specification. These parts are suitable only for applications where the circuit design accommodates the reduced current rating. Verify circuit requirements before selecting these parts.

Q: Are all substitute parts automotive qualified?

A: The original MBRF2060CT-JT carries AEC-Q101 automotive qualification. Among the substitutes, only the DSTF2060C and DSTF3060C explicitly maintain automotive-grade status through Littelfuse. The MBR1060FCT-BP and VFT1060C variants do not specify automotive qualification in the provided data. For automotive applications, the Littelfuse DSTF series is the appropriate choice.

Q: What is the significance of the isolated tab in the TO-220-3 package?

A: The isolated tab (ITO-220AB) means the tab is electrically isolated from the semiconductor die, allowing it to be mounted directly to a heat sink without requiring an insulating washer. All listed substitute parts maintain this isolated tab configuration, ensuring mechanical compatibility with existing PCB layouts and thermal management designs.

Q: How do forward voltage differences affect circuit performance?

A: Forward voltage (Vf) determines the voltage drop across the diode during conduction. The MBRF2060CT-JT specifies 810 mV @ 10 A, while the DSTF2060C specifies 650 mV @ 10 A. The lower forward voltage of the DSTF2060C results in reduced power dissipation and lower junction temperature during operation. This difference is typical among Schottky diode manufacturers and generally improves circuit efficiency.

Q: What does reverse leakage current indicate?

A: Reverse leakage current (Ir) is the small current that flows through the diode when reverse biased. The MBRF2060CT-JT specifies 100 µA @ 60 V. Higher reverse leakage in substitute parts (such as 850 µA in DSTF2060C or 700 µA in VFT1060C variants) indicates slightly higher standby current consumption. For most applications, these differences are negligible; however, for low-power or precision circuits, verify that reverse leakage meets design requirements.

Q: Are there packaging differences between substitute parts?

A: The MBRF2060CT-JT is supplied in full pack configuration. The DSTF2060C and DSTF3060C are supplied in tube packaging. The MBR1060FCT-BP is supplied in bulk packaging. The VFT1060C variants are supplied in tube packaging. All parts use the same ITO-220AB supplier device package and TO-220-3 case outline, ensuring mechanical compatibility. Packaging differences affect only procurement and handling, not electrical or thermal performance.

Q: What is the operating temperature range difference between parts?

A: The MBRF2060CT-JT specifies -55°C to 150°C junction temperature range. The DSTF2060C and DSTF3060C match this range exactly. The MBR1060FCT-BP specifies -50°C to 150°C, which is 5°C narrower at the lower end. The VFT1060C variants specify -40°C to 150°C, which is 15°C narrower at the lower end. For applications requiring full -55°C operation, the Littelfuse DSTF series is required.