MBRF2060CTHC0G Equivalent & Substitute Parts

Part Overview

The MBRF2060CTHC0G is a Schottky diode array manufactured by Taiwan Semiconductor Corporation, configured as a 1 Pair Common Cathode arrangement with a maximum reverse voltage rating of 60 V and average rectified current of 20A per diode. The device is packaged in a TO-220-3 Full Pack with isolated tab configuration for through-hole mounting applications. This component is classified as Active product status with AEC-Q101 automotive qualification and ROHS3 compliance. Equivalent and substitute parts are identified to provide design flexibility for applications requiring comparable electrical and mechanical characteristics, particularly when addressing inventory availability or specific performance requirements within the defined parameter range.

Substiute Parts

MBRF2060CTHC0G

Taiwan Semiconductor CorporationIn Stock: 1013MBRF2060CTHC0G Datasheet

Current PartRFQ

MBRF1560CT-E3/45

Vishay General Semiconductor - Diodes DivisionIn Stock: 1403MBRF1560CT-E3/45 Datasheet

SimilarRFQ

VFT3060C-E3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 16598VFT3060C-E3/4W Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MBRF2060CTHC0G is determined by strict adherence to the following critical parameters: diode configuration (1 Pair Common Cathode), technology (Schottky), maximum reverse voltage (60 V), package type (TO-220-3 Full Pack, Isolated Tab), and mounting method (Through Hole). All substitute parts must maintain identical diode configuration and package specifications to ensure mechanical and electrical compatibility within the application circuit.

The identified substitute parts are grouped based on their ability to operate within the same voltage class (60 V maximum reverse voltage) while maintaining the same physical form factor and pin configuration. Current rating variations are permitted within the substitution framework, as applications may tolerate lower current capacity depending on circuit design requirements. Forward voltage characteristics and reverse leakage current may vary between substitutes, requiring circuit-level validation for applications with strict power dissipation or leakage specifications.

All substitute parts listed maintain Active product status, ROHS3 compliance, and automotive-grade qualification standards consistent with the main part.

Parameter Comparison

Engineering Selection Recommendations

All three components—MBRF2060CTHC0G, MBRF1560CT-E3/45, and VFT3060C-E3/4W—are Active product status devices with ROHS3 compliance and REACH Unaffected designation, meeting current environmental and regulatory requirements for electronic component procurement.

The MBRF2060CTHC0G provides the highest current capacity at 20A per diode with automotive-grade AEC-Q101 qualification. This part is suitable for applications requiring maximum current handling within the 60V voltage class.

The VFT3060C-E3/4W offers 15A current capacity with lower forward voltage characteristics (700 mV @ 15 A) compared to the main part, while maintaining identical operating temperature range and automotive qualification. This substitute is applicable for designs where current requirements fall between 15A and 20A, or where reduced forward voltage drop is beneficial for thermal management.

The MBRF1560CT-E3/45 provides 7.5A current capacity with the lowest forward voltage (750 mV @ 7.5 A) and extended lower operating temperature limit (-65°C minimum). This substitute is suitable for lower-current applications or environments requiring extended cold-temperature operation.

Selection between these parts depends on circuit current requirements, thermal dissipation constraints, and operating temperature specifications. All parts maintain identical package configuration and pin assignment, ensuring direct mechanical compatibility in TO-220-3 through-hole mounting applications.

Frequently Asked Questions (FAQ)

Q: Can MBRF1560CT-E3/45 be used as a direct replacement for MBRF2060CTHC0G?

A: MBRF1560CT-E3/45 is mechanically compatible due to identical TO-220-3 Full Pack, Isolated Tab packaging and pin configuration. However, the current rating is reduced from 20A to 7.5A per diode. This substitute is applicable only in applications where circuit current requirements do not exceed 7.5A per diode.

Q: What are the key differences between VFT3060C-E3/4W and MBRF2060CTHC0G?

A: Both parts share identical 60V reverse voltage rating, TO-220-3 package configuration, and operating temperature range (-55 to 150°C). The primary differences are current capacity (15A versus 20A) and forward voltage characteristics (700 mV @ 15A versus 950 mV @ 20A). VFT3060C-E3/4W exhibits lower forward voltage drop, which reduces power dissipation in applications operating at or below 15A.

Q: Are all substitute parts automotive-qualified?

A: MBRF2060CTHC0G carries explicit automotive-grade designation with AEC-Q101 qualification. MBRF1560CT-E3/45 and VFT3060C-E3/4W are Active product status components with ROHS3 compliance and REACH Unaffected status. Automotive qualification status for the Vishay substitutes is not specified in the provided parameters.

Q: What is the significance of reverse leakage current differences?

A: MBRF2060CTHC0G specifies 100 µA reverse leakage at 60V, while both Vishay substitutes specify 1 mA and 1.2 mA respectively. Higher reverse leakage increases standby power consumption and heat generation. Applications with strict leakage specifications require the MBRF2060CTHC0G.

Q: Can these parts be used interchangeably in existing PCB designs?

A: All three parts use identical TO-220-3 Full Pack, Isolated Tab packaging with ITO-220AB supplier device package designation. Pin configuration and mechanical footprint are identical, enabling direct PCB compatibility. Circuit-level validation is required to confirm that current and voltage characteristics meet application requirements.

Q: What is the operating temperature range difference between substitutes?

A: MBRF2060CTHC0G and VFT3060C-E3/4W operate from -55°C to 150°C. MBRF1560CT-E3/45 extends the lower temperature limit to -65°C, providing 10°C additional cold-temperature margin. Applications requiring operation below -55°C must use MBRF1560CT-E3/45.