MBRF1660HC0G Equivalent & Substitute Parts

Part Overview

The MBRF1660HC0G is a Schottky rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 60 V DC reverse voltage and 16 A average rectified current in a through-hole TO-220-2 package. This component is designed for automotive-grade applications and carries AEC-Q101 qualification. The part is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives for ongoing system support and procurement.

Substiute Parts

MBRF1660HC0G

Taiwan Semiconductor CorporationIn Stock: 994MBRF1660HC0G Datasheet

Current PartRFQ

MBRF1660H

Taiwan Semiconductor CorporationIn Stock: 825MBRF1660H Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MBRF1660HC0G is determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters establish the substitution criteria:

• Voltage Rating: 60 V DC reverse voltage (Vr) maximum
• Current Rating: 16 A average rectified current (Io)
• Forward Voltage Drop: 750 mV maximum at 16 A forward current
• Recovery Speed: Fast recovery ≤ 500 ns for currents > 200 mA
• Reverse Leakage: 500 µA at 60 V
• Package: TO-220-2 through-hole configuration
• Temperature Range: -55°C to 150°C junction operating range
• Automotive Grade: AEC-Q101 qualified
• Compliance: ROHS3 compliant

Substitute parts must match all parameters listed above without deviation. The MBRF1660H meets these criteria and is identified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

The MBRF1660H is a direct functional equivalent to the MBRF1660HC0G. Both components are manufactured by Taiwan Semiconductor Corporation and share identical electrical specifications, thermal characteristics, and package configuration. The MBRF1660H maintains active product status, ensuring continued availability and supply chain reliability.

Both parts carry automotive-grade qualification (AEC-Q101) and ROHS3 compliance, meeting regulatory and environmental requirements for automotive and industrial applications. The electrical parameters—including 60 V reverse voltage rating, 16 A current capacity, 750 mV forward voltage drop, and fast recovery characteristics—are identical across both parts.

The primary distinction is product lifecycle status: the MBRF1660HC0G is discontinued, while the MBRF1660H remains in active production. For new designs or ongoing procurement, the MBRF1660H is the appropriate selection.

Frequently Asked Questions (FAQ)

Q: Can the MBRF1660H be used as a direct replacement for the MBRF1660HC0G?

A: Yes. The MBRF1660H is a direct equivalent. All electrical parameters, thermal ratings, package configuration, and automotive qualifications are identical. The parts are pin-compatible and functionally interchangeable in circuit applications.

Q: What is the difference between MBRF1660HC0G and MBRF1660H?

A: The MBRF1660HC0G is discontinued at DiGi Electronics, while the MBRF1660H remains in active production. No electrical or mechanical differences exist between the two parts. The designation change reflects product lifecycle management by the manufacturer.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the MBRF1660HC0G and MBRF1660H are automotive-grade components with AEC-Q101 qualification. They meet automotive reliability and environmental standards.

Q: What is the TO-220-2 package configuration?

A: The TO-220-2 is a through-hole package with two leads, designed for direct insertion into printed circuit boards. This package provides robust mechanical connection and is standard for high-current rectifier diodes.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 compliant and REACH unaffected. They carry identical regulatory classifications (ECCN: EAR99, HTSUS: 8541.10.0080).

Q: What is the moisture sensitivity level (MSL) for these diodes?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Can these diodes be used in parallel for higher current applications?

A: Current sharing in parallel diode configurations depends on circuit design and thermal management. The provided specifications do not include parameters for parallel operation analysis.

Q: What is the reverse recovery time for these Schottky diodes?

A: Both parts are specified as fast recovery with recovery time ≤ 500 ns for currents > 200 mA. Detailed reverse recovery time curves are not provided in the available specifications.